similar to: Fwd: Asterisk With Cisco Voice Router

Hi Carlos " Agentcallbacklogin was deprecated in Asterisk 1.4 and eliminated from 1.6 so you now need to use Dynamic Agents. Although they claim that is is simple enough to replace that functionality with dial plan code I have yet to see a one line example that replaces everything the agentcallbacklogin command did.| I totally agree, I have never seen any example that makes it work.

First off this is not my work for extensions.conf it is modified from http://leifmadsen.wordpress.com/2009/07/15/migrating-from-agentcallbackl ogin-to-standard-dialplan-methods-part-1/ So credit to Leif Madsen <http://www.leifmadsen.com> But as to my question [AgentLogin] ;A replaced version of AgentCallbackLogin() using a GoSub() ; exten =>

Hi everybody Did anybody by any chance ever work out how to log in and out agents on Asterisk 6+? I used to have it working perfect in Asterisk 1.2 but since I upgraded to 6 the agent login functions are gone and the readme file that came with it made no sense to me. I noticed somebody on the net posted that they had the same problem but used Voicemail to authenticate users, but that seemed a

I have the following setup: DS3 -> Cisco AS5400 -> H.323 (ooh323) -> Asterisk Inbound calls work great but outbound calls fail. So to check and make sure we have outbound calling ability on the DS3 we setup a Cisco Call Manager Express and it can make outbound calls both local and long distance with no problems. The failure code is Cause i = 0x8381 - Unallocated/unassigned number. We

Hi Michael and Everyone I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm getting this error "reason 24 (Call ended with Q.931 cause)" I've checked the Asterisk wiki and several other resources. Please can anyone give me a hint on what the problem is I reach my wits end. Thanks Tola my config and debug Configuration of OpenH323 channel driver

I just inherited a Cisco 2621 with a VWIC-1MFT-T1 card in it. Can I make this thing into MGCP gateway or even a SIP gateway for asterisk? Seems like it should bee useful for something! I'm perfectly happy to do my homework, but also don't feel thee need to reinvent the wheel! So, links with relevant info would be appreciated. If there is a config for a 2621 being used as a gateway

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

Hi all, i've installed the a new pwlib (1.5.0) / oh323lib (1.12.0) on my *. Then i've installed the new chan_oh323 (0.5.6). when i try to make a call with "netmeeting" through * ( * dial out with "Dial,OH323/${EXTEN}@xx.xxx.xxx.xx" ) the call will be blocked. Before, there was chan_oh323 0.5.5 and pwlib(1.4.11) and openh323(1.11.7) installed, and it worked. Is here

On Tue, Aug 28, 2018 at 5:57 PM, Peter Wu <peter at lekensteyn.nl> wrote: > Just to be sure, after "sleep", do both devices report "suspended" in > /sys/bus/pci/devices/0000:00:1c.0/power/runtime_status > /sys/bus/pci/devices/0000:01:00.0/power/runtime_status > > and was this reproduced with a recent mainline kernel with no special > cmdline options? The

Hi All, I have set up a box that will be used as follows: SIP Phone ----> Asterisk ----> Cisco H323 VoIP Server 192.168.1.5 192.168.1.50 192.168.1.80 Asterisk is running the latest CVS and oh323 driver. The SIP phone is a Grandstream Budgetone 100. I have everything setup and running with G.711 ALAW and ULAW and i'm able to make calls through

Can anyone work out why my callerid doesn't work on my isdn4Linux with asterisk (or without asterisk for that matter)... This used to work fine, and I am quite confident that the telco is sending callerid information (because they always do on all ISDN lines standard, only extra cost on POTS lines). This is the information from dmesg, whether asterisk is running or not: isdn_net: Incoming

Hi all, I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300 to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can somebody help me? Ganbaa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm

I'm trying to use a Howlink CL-100 ip phone with * It's h323 phone with very limited protocol support. But it's enough that I can use it to dial netmeeting client and artisoft pbx just fine. When I try to dial my * with it using either chan_h323 or oh323, it seems to fail on negotiating H245. Maybe this phone doesn't support it? I've used all different versions of

hi .. i've just installed and licensed an instance of the G729 codec. I am trying to connect through asterisk to Go2Call server .. According to their info it involves dialling extension 729 on voip01.go2call.com, to get the IVR. my extensions.conf shows : exten => s,2,Dial(OH323/h323:729@216.52.153.206) which I think is correct, I have G729 enabled in the OH323.conf file and it seems to

I'm just curious if anyone has the X100P & Callerid receiving working outside US. Replies are appreciated. Also if it's not working for you in a certain coutry you can respond too. regards Martin

Hi! We planing to by some PRI/BRI equipment to replace our existing telephone system. So I am going to try this: ISDN Card Outgoing Digital Call / Capability: Unrestricted digital information -> octobri -> asterisk -> TE410E -> Internet Provider / Receiver for Capability Unrestricted digital information The question is: Is asterisk possible of transmit this digital call to the

Okay, here is the background. I have a PRI with 15 active channels on it. I originally setup all of them in group=1 and all outgoing and incoming calls used this group. The phone number that I have associated with these channels ends with 750 and that is how I direct the calls. i.e. In my extensions.conf I have: exten => 750,1,Dial(SIP/120,20) All this works fine. Now I have the need

On Fri, 23 Oct 2020 14:07:13 +0200 Mike Galbraith wrote: > On Fri, 2020-10-23 at 11:01 +0200, Sebastian Andrzej Siewior wrote: > > On 2020-10-22 07:28:20 [+0200], Mike Galbraith wrote: > > > I've only as yet seen nouveau lockdep gripage when firing up one of my > > > full distro KVM's. > > > > Could you please check !RT with the `threadirqs'

Hello, Users. I loaded module chan_h323.so, chan_vpb.so. I have met a message : "No one is available to answer at this time". I don?t know what I do.. My 'h.323 trace 5' result is : == vpb/1-8: Starting record mode (codec=0)[AST_FORMAT_SLINEAR:VPB_LINEAR] -- Executing Dial("vpb/1-8", "h323/192.168.1.107") in new stack 1:21:34.936 ThreadID=0x06f2bbb0

I'm experimenting (using for the first time) with using a cisco3620 to connect to the PSTN via a channelised E1 interface, with * handling all of the SIP calls. If anyone has any installation tips / help / documentation I would be most appreciative :) However, my first question is this: when I am in the setup, I see the following: Current interface summary Controller Timeslots