similar to: Newbie trying to make calls outside via digium card and POTS line

[also posted on Trixbox trunk forum] I am also working with Sangoma directly to debug this, but so far no real luck. TrixBox 2.6.1, A102d card with V33 firmware (latest) and WANPIPE 3.2.6 (3.2.7 is out, but nothing has changed that would affect this problem). The system gets about 200 calls inbound on the trunk, which is not very heavily used, and of those calls one or two a day is randomly

I just had a user report that they called out to someone on a cell phone this morning, and after a short conversation, the call was dropped/lost. The person on the cell phone says that this is very rare, and would not suspect the dropped/lost call to be on their side. I have looked at the asterisk/full log as thoroughly as I can, and have pasted the lines which seem relevant to that call below.

Hi people, I have a problem with some extensions. The calls are ended after 31/35 seconds, also, it depends on the number which I call. This is the log, but I've not been able to find something wrong... Any ideas? [Jun 11 15:50:46] DEBUG[26071] app_macro.c: Executed application: ExecIf [Jun 11 15:50:46] VERBOSE[26071] logger.c: -- Executing [s at macro-dialout-trunk:16]

Hi, We are using asterisk 1.4.34, ubuntu 10.4, below is suspicious activity recorded in our full log. Could you help us to explain what had happened. Thanks. === my friend, 801, from his room did a test by dialing echo test in freepbx, *43: [Aug 20 14:42:46] VERBOSE[14427] logger.c: -- Executing [*43 at from-internal:1] Answer("SIP/801-000003f5", "") in new stack [Aug 20

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

I have posted my problem on the link below, but didn't get any answer. I am hoping someone here can help me with this issue. Here's my problem: I am using H323 to talk between Asterisk and Avaya IP Office 500. For some strange reason, when we are talking on a VoIP call, we get disconnected after 10+ minutes. We have two other Elastix box, but none of them are getting disconnected. From

Hi, We have a PRI Trunk (physical E1) and we are getting some rather weird and very isolocated problems. On outbound calls to specific numbers, it would seem to me that DTMF from the remote side is affecting the local asterisk system. Basically what happens: - We make a OUTBOUND call via the PSTN (PRI Trunk) to a remote System - Remote Answers, and converse - Remote sends DTMF on their site to

Hello, I am having an issue whereby calls are being dropped randomly. I have an ISDN 30 E1 line going into a Wildcard TE220 (4th Gen). My Asterisk install is based on Trixbox 2.0. However, I have updated the source code to the following. The Asterisk release is asterisk-1.2.20. Zaptel release is zaptel-1.2.18. And libpri release is libpri-1.2.4. I have include an extract from the Asterisk log

> > Hi, Remove usecallingpres=yes busydetect=yes from your zapata.conf file. and the restart asterisk. Hopefully you will not faced drop call issues. Regards, Vidura Senadeera. Message: 3 > Date: Mon, 24 Sep 2007 12:29:40 +0100 > From: "Richard Young" <Richard.Young at intrintech.com> > Subject: [asterisk-users] Asterisk Dropping Calls > To:

Hello List, I am having a strange issue with a trixbox system we installed for a client, and I would appreciate any help on this one. The issue is that occasionally when they go to answer an inbound call from the Sangoma A200 - there is no one there, and they are presented with dial tone. The calling party is hung up. A bit of background: The client actually has two systems install (one at

Hello - I've read Asterisk should be able to activate a do not disturb feature to turn off the ringers on extensions. I checked the wiki and can't find documentation for how to do it. Here's my attempt, added to extensions.conf: [dnd-on] exten => _#78,1,Answer exten => _#78,n,Wait(1) exten => _#78,n,Macro(user-callerid,) exten =>

Hello, I'm running Asterisk@home 2.5 asterisk 1.2.4 zapatel 1.2.2 libpri 1.2.2 on a Dell Poweredge 2850 (1 CPU) with a TE210P I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound calls on all channels and can only make outbound calls on channels 25-48. Attempting to make an outbound call on channels 1-23 results in congestion.

Hello, I have a system with two cards: a HFC-PCI ISDN and a TDM21B (2 FXO and 1 FXS), running Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l with freePBX beta5 dialplan. I have connected an analog phone to TDM FXS port, but when I pickup the phone to make a call, Asterisk "hangs up" the call. Let me explain: In another system, when I pickup the phone, Asterisk give me tone to dial: >---

Hi, I am using asterisknow 1.5.0 and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. I think the same problem listed here: https://issues.asterisk.org/view.php?id=6683 There is one patch on this link but i don't know how to apply patch on asterisknow.

Hello, My client customers complaining that their calls suddenly get hung-up, I am just investigating if the problem from my side, I had a log of a hang-up case, Does it help to know if there is a problem that can be resolved from my side? elastix*CLI> -- Hungup 'IAX2/99999-6813' == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on

Hi Everyone Asterisk 1.4.33 is running with Sangoma/Dahdi for analogue lines to Bell Canada. User claims that call hangup without any interferance to the phone set. Is there ANYWAY to find out which party hang-up the call or if the call was cut-off due to other reasons? I checked the *"asteriskcdrb"* table and it's pretty much useless in this case as it only logs the duration and

Hi list I'm kinda new to asterisk and I'm woriking for a company that sells Asterisk solutions and appliances. I installed TrixBox on a litle PC @ home and a x100p card which is recognized as a Zaptel card, I made some in/outbound routes and they seem to work but I have a problem with SIP softphones. I created 2 estensions 1000 and 1001 they're both in different cities, when I 1000

I have two servers, each connected to the PTSN via PRI. When I call from site A (951-999-9999) to site B (555-1212) and the phone at site B is on the phone, I hear the normal ring tone for about 20 seconds, then the message "all circuits are busy now. please try your call again latter" followed by the congestion tone. Instead, I want this to busy ring and then hang up without any

I am having problems sending and receiving calls over the T1. They never seem to connect - outbound keeps ringing, inbound gets busy. The T1 looks ok - no errors on the line. Any ideas on what is wrong? I have tried a variety of fxsks and fxoks configurations without avail. This is a single asterisk@home system with a single T1 card. Robbed Bit T1 ami, d4. ------------------inbound call

Hello, I have setup the n-way conferencing with Asterisk and it's working when I use with my budgetone 100 phone but it doesn't work for any of the voip software or other ATA that I have. When I turned the debug on, I see that the correct keys (*0) were entered but asterisk doesn't detect the signal to trigger the features event. I have set a test extension to get the input dtmf key