similar to: Problem with incoming and outgoing calls via TDM

Hi all, I have TDM2406E with 24FXO ports connecting to 10 POTS line sitting in my office. the out going calls symptom like when called party pickup the phone but the calling party still hearing the ring tone from the IP phone. Please light me up. it been many sleepless night by googling around trying to get the right answers. The digium card running on Intel 915G chipset. Below are my zaptel

Hi, is there any possibility to get a XEN DomO and DomU running with bridget and routed mode together. The reason behind this is, to get the requests via the official IPs to the DomU''s (routed-mode) and the interworking between the DomU''s with connected with help of the (bridged-mode). I got it work, with setting everything up manually. But as I understood the

The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point that the cable plugs into the card. Here is my /etc/zaptel.conf loadzone=us fxsks=1 and here is my /etc/Zapata.conf [channels] language=en #include

Hi all, My NT environment cannot recognize my SAMBA servers(Bad IP address when ping from MS DOS prompt) and after I restarted the nmbd daemon it can see my SAMBA servers. Does anyone know why this happens? Is it there is a change in the WINS server's database? Please advise. thanks & regards, Bridget

Hi I'm a little lost on how to set things up with the two FXO cards I have: I want card #2 to dial a number when a call comes in on card #1. Using the following configuration, card #1 picks up the line and remains silent, instead of dialing out through card #2. Anybody knows what's wrong? --------- /etc/zaptel.conf --------- # Zaptel Configuration File # fxsks=1,2 loadzone=fr

as my first project with *, i would like to replace our old neax2400(sds) with an * server. i've got an X100p and a TDM400 on hand already. for the CO lines, the X100p works ok with fxsks signaling though there are still strange things happening every now and again but more testing is on the way. my real big problem is the DID lines which our telcos call DDI lines; (incoming calls only) i

Hello, I cannot run unicorn_rails out without using bundle exec . This is the error: /home/user/.rvm/gems/ruby-1.9.2-p180/gems/bundler-1.0.15/lib/bundler/runtime.rb:31:in `block in setup'': You have already activated rack 1.3.1, but your Gemfile requires rack 1.2.3. Consider using bundle exec. (Gem::LoadError) Maybe RVM is involved? Maybe I am involved? Please add me in the CC replies,

Is there anything special needed to load up a TDM10B card?? I got the card today.. Took it from the box, put it into a PCI slot.. connected the power to the card and booted the PC.. I have removed the X100P to avoid confusion and I have the following in the config files.. in /etc/zaptel.conf # For the X100P #fxsks=1 # For the TDM10B fxoks=1 in /etc/asterisk/zapata.conf [channels]

Hi all.. I have a problem with my asterisk installation. I'm using a Wilcard X100P clone in Spain. Incoming calls work fine, but when I make a outgoing call, a hear the ringing, and the peer phone ring, when the peer answer, asterisk hangup the call, or say busy. This is my conf: zaptel.conf: --------- loadzone = es defaultzone=es fxsks=1 zapata.conf ---------- [channels]

I currently have Asterisk 1.2.7.1 and the Sangoma A200 w/ 6 FXO ports and HW Echo canceller. I have outgoing calling setup to use a group so that if one channel is busy it goes to one of the other channels. What's weird is that when I dial an outside number, sometimes it goes through and other times I get "You have reached an invalid pager number MCLL327." I have no idea what that

I have an eight channel fxo setup (2 TDM400P cards) and I have them setup. Here are my configs: Zaptel.conf: fxsks=1-8 loadzone=us defaultzone=us Zapata.conf: [trunkgroups] [channels] musiconhold=default rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callerid=xxxxxx callwaiting=yes busydetect=no callprogress=no usecallingpres=yes callwaitingcallerid=yes

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

Hi i have a tdm2400p and installed asterisk 1.4.11 with zaptel 1.4.5 im having an error message when in running asterisk with the tdm card in. here's the error from the console of asterisk: [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:7489 mkintf: Unable to get span status: Inappropriate ioctl for device [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:10466 build_channels: Unable to register channel

Hi, When we make an outgoing call on ISDN (zaphfc) with overlap dialing we get immidiate hangup after answer. But when we place a full number before dialing everything is ok. Any help appriciated!! Thanks here is info with debug: == Primary D-Channel on span 1 up -- Executing Dial("SIP/200-164c", "zap/g1/|100|tc") in new stack -- Making new call for cr 192 --

Hello, We have a high volume of incoming and outgoing calls that come in via our analog POTS lines connected to FXO cards in an Adtran TA750. This is connected to a T100P. We are using Polycom IP 500's. The problem we are experiencing is, on frequent occasions, when someone dials out, there is another person who has just dialed in. I have had this problem at my house before (without an *

hi you, I'm having problem with voice quality on my trixbox using TDM2400B.The trixbox is connected via 20 FXO ports on a TDM2400 with the hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'background crackle/buzz' coming back when they talk. anyone have the same problem? pls help me. thanks a lot. my trixbox and config

What is involved in provisioning Asterisk to use a multiline analog service from our local telco? I will only have one twisted pair entering in on a OpenVox card but am not sure how Asterisk interprets and deals with two incoming calls and/or two outgoing calls? Thanks! jlc

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas???

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo