similar to: pci cards VS patton

Hi, My setup is: IPPhone1 --- Asterisk1 with B410P ---- Patton 4638 --- Asterisk2 --- IPPhone2 I want to evaluate Asterisk1 in TE/PtmP mode. So, Patton box is configured in NT/PtmP (with 3 BRI links between both systems). Anyway, asterisk -rx "pri show spans" keeps replying : PRI span 1/0: Provisioned, Down, Active PRI span 2/0: Provisioned, Down, Active PRI span 3/0: Provisioned,

Hi Olivier It seems wrong configuration, because according to your mail Asterisk it will be acting as terminal mode (ie Patton gateway acting as network and asterisk as terminal). But Asterisk message is indicated Asterisk a s a NT mode [ 212.226050] wctdm24xxp 0000:0a:01.0: xhfc: Configuring port 0 span 1 in NT mode with termination resistance ENABLED. It could help by checking parameters on

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes - and then Asterisk? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm

I have been given a Patton SmartNode 4114 and asked to get it working as POPS gateway for our asterisk box. The 4114 has 4 FXO ports. It's got firmware 3.21 on it. I currently have a single POPS line plugged into port 0. I can not seem to get the two to talk together. I am running asterisk 1.2.21.1. I am seeing the following repeatedly in * Jan 24 16:23:40 NOTICE[17063]: chan_sip.c:11291

Hi, we have and Asterisk server connected to a Patton Smartnode 4638 with 4 BRI. We configured 4 SIP account on Patton (1001, 1002, 1003, 1004). The system is fully functional, but we have a problem to recognize incoming calls from Asterisk: when a call come from SIP/1001 (BRI 1 on Patton) or SIP/1002 (BRI 2) or SIP/1003 (BRI 3) Asterisk record a call coming from SIP/1004. I have contacted Patton

Hi, 1. Has someone met any success at all, connecting a Digium B410P to a Patton Smartnode 4638 (with latest 5.3 firmware) ? 2. If positive, then, which signalling was used on both sides ? My project's goal is use a Patton Smartnode 4638 to act as telco BRI lines, from a B410P-enabled asterisk box. In my testings, I can see channel is respectively up (with patton web server status page)

Hi, I succesfully install spandsp chan_misdn and digium card. the rxfax works fine and I get the fax result by email. I would like to do the same using a Patton gw + zaptel but I can't receive fax anymore, the call comes in from ISDN in the Patton gw, patton sends it to asterisk, asterisk run a macro to make a tif file using rxfax, the tif file is correctly created but with a 0 size the call

Does anybody have any experience using a Patton SmartNode as a SIP/Telco gateway with Asterisk? They seem really inexpensive and appear to support all of the necessary features, but I don't have any experience with their products, so I don't know if they are any good. We are currently using a Cisco 2600 w/ PRI card and it works fine, but I was looking for someone else as a possible

Any have any success using a patton smartnode 4118/js/eiu fxs gateway with asterisk? We we're able to get the unit to register with asterisk, but when trying to place a call, no codec was compatible, even though I had all of the following enabled on the patton ... # G.711 A-Law/?-Law (64kbps) # G.726 (ADPCM 40, 32, 24, 16 kpbs) # G.723.1 (5.3 or 6.3 kbps) # G.729ab (8kbps) the link to this

I have a patton 1400 setup to handle the bri interface. As a trixbox user, I wanted a sip trunk rather than having to re-compile bri support into trixbix. Anyway, I have it working now so that asterisk can make calls and they are passed properly to the telephone network. Incoming calls however are another matter. I have (after turning on cli debug in the 1400) determined that its getting stuck

Hi all We use pci/pci-e BRI cards in our installations. Due to echo problems (that was before Oslec and others), we quickly switched to cards with hardware-based EC. So we use exclusively Digium B410p cards that provide 64ms tail EC. For several reasons we'd like to switch to external BRI gateways like the Patton smartnodes (the price is getting really close to a B410p). I'm

Hey Everyone, i am using Asterisk 1.4.21.1 with a old Patton SN1400 and some SNOM 300,320,360 Devices. In the combination with asterisk and the patton, there are occuring some strange behaviour, due to the calling and answering everything works good, clear voice, great availability. All the devices have to use ulaw, alaw and slinear is available but never the first choice since i use my

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm lost as to how to then

Afternoon, I was hoping someone could point me in the right direction. I have an asterisk PBX deployed in China using a TDM400P based card. The incoming calls are being picked up correctly, but are not being hung up. I suspect that this might be an issue with the signaling that has been selected. If anyone here has deployed asterisk in china using an analog card, it would be a great help

Hi, Is it possible for a Manager/Supervisor to intercept and listen in on live calls for training and evaluation purposes? Thanks -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hi, Digium stopped to produce TDM400P and the new TDM410 is too new to find it in our shops. The only alternative available is a "fully-compatible" Openvox product...but is it really "fully-compatible"? Any experience about Openvox products (card and zaptel versions, etc...)? Thank you! Giorgio.

Hi All, I have installed asteriskNow with Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured x100p fxo card in my asterisk box. But in my cli mode i am not getting the command *"dahdi show status"* Output of CLI : astrisks*CLI> *dahdi show status* No such command 'dahdi show status' (type 'core show help dahdi show' for other possible commands) I

pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]:

Hi all, since Asterisk 1.4 seems to have too many differences from previous versions, wouldn't be nice to have a new mailing list? Giorgio Incantalupo

Hi, I'm trying to configure a 4638 to pass inbound and outbound to and from ISDN and SIP interfaces. I'm using web interface at the moment. Setup is: ISDN -- <BRI> -- Patton 4638 -- <SIP> Asterisk -- <SIP> -- <IP Phone> I can call from IP phone but can't receive any incoming call : I can't see any SIP message coming in when a call comes in. Previously,