similar to: Linksys SPA 400, 901 and 921 with asterisk

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Anyone else have problems with phones like SPA-922, SPA-921, etc? Inbound audio is perfect but the remote end reports audio quality issues on the audio the handset is sending out. It's not the network.... I've tried asterisk 1.2, 1.4. I've used ulaw, G726, G793 & G729. Ulaw seems to be the least problematic but its still an issue. Doesn't matter if we send the calls to the PSTN

I may have need for a small multi-port FXO i/f. Anyone have hands-on experience with this linksys device? On past projects I've used SPA-3000 & Digium TDM400 and found them unsatisfactory. Michael

Hi all, I have asterisk connected to my voice application server. Asterisk is connected and registering to a linksys spa400 box. I am running an application on a perticular extention (141). Here is a snip from my extensions.conf... exten => spa400,s,MyApp(/etc/asterisk/MyAppConfig.conf) exten => spa400,s+1,Hangup when an incoming call comes,It is accepted properly,And the application

Hello list, I recently bought a Linksys SPA400 as a PSTN gateway. The gateway is connected to an * server and i have 10 users using this setup. I do have some problems in establishing a call to an outside location (call that goes through the SPA400). The first attempt doesn't get through. I suspect the spa400 being the source of the problem. The Linksys SPA400 has a lot of params on the

Hi list, After successfully configuring Linksys SPA3000 and SPA3102 devices as Asterisk PSTN gateways, the only thing I can't get working is the PSTN Caller ID. The analog and SIP phones I've used can both display CIDs for internal calls, while the analog model also displays CIDs correctly when attached directly to the PSTN line. However, when PSTN calls come in via the SPA

All, I am looking at a little support on this, as I haven't found it on google yet. I have had this work on Callweaver, but am moving to Asterisk for a variety of reasons. My dial plans, and everything else transferred perfectly, though I am not sure they are 'correct' for Asterisk 1.6.1, with simple things like SIP users outlined in the sip.conf file, not in the users file,

Sorry, I am resending this, I tried earlier, but I couldn't see it appear on the archives - apologogies if it appears double! -------------------------------------------------- My Sipura 3000 ATA died on me this morning. I had a Linksys SPA 3102 available which I would like to use as a replacement. Unfortunately, the SPA3102 is not able to register with the asterisk server - I am

Hello! We are using several Linksys SPA-941 in our office. After IP change occur devices seems not to be reachable, actually unavailable! Devices is connected, e.g. we can place a call using SPA-941 but can not receive any calls... Kim __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

does anyone get a hold of the SPA-941 Provisioning Guide? i tried call Sipura's tech support, seems like none of them heard of the term "remote provisioning". they kept refering me to their web site which i've check thoroughly, and could not find any documentations on the SPA-941. finally they gave me a phone number to call, which appears to be a fax machine. that's when i

Topology: analog_phone-----SPA2102-----Navini_Wireless_Router------ISP------Asterisk A ping against the asterisk server shows aprox 145ms roundtrip. 128kbps upstream 512kbps downstream g729a as codec signal quality of the navini router: 100% The ATA operates correctly in every form, however sometimes when someone is talking to me (the other person is at pstn) and then I start talking the other

I have a linksys SPA 3102 with a DECT phone connected into its Telephone port. It has been working, but something I've done (and I don't know what) means that now everytime asterisk tries to dial it, it says it is busy. I can make calls from it through asterisk I am at a complete loss to know what to try next to fix it. Any ideas? -- Alan Chandler http://www.chandlerfamily.org.uk

Hello List, After seeing a few positive responses for the Linksys SPA-942 phones I was hoping to get some answers on the following questions: * How do the phones handling system wide paging? Is it similar to the Polycom phones? * Can a corporate directory be configured with the phones using Asterisk? * How is the speaker phone quality? Thanks Roy Anciso Director of Technology Manistee

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Hi! I'm a new member in VoIP world. I want to implement a VoIP PBX using asterisk/tribox in the office but I have one doubt. Which is the best way to use actual PSTN lines in the VoIP PBX? Using a box as Linksys SPA400 or installing a PCI card (Rhino/Digium...) into the server? Which benefits/problems will I have with each option? Regards -------------- next part -------------- An HTML

Has anyone had any experience with the Linksys SPA-941 when it comes to multiple line appearences? The 941 comes with 4 line appearence buttons which can individualy be configured to point at any extension. The phone is capable of 2 extensions out of the box with the option to add 2 more for a license fee. The 941 manual states that, "The Call Waiting function is activated when a

Hi people, I'm having problems of connection with a Linksys SPA IP PHONE 942 when I use the WAN port, most of the time when I try to connect to the network or restart the IP Phone I can't get internet connectivity . I tried using both static IP and DHCP, but the problem is the same. Some have had similar problem with this brand of IP Phone? Thanks for the help and attention. Hugs

I was just browsing my local suppliers list of headsets - not a single one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. Can anyone recommend a headset that works with e.g. SPA-921 and -941? /Per Jessen, Z?rich

Hi, I was wondering if anyone stumbled upon the correct event in a sip NOTIFY (from a SUBSCRIBE) to make the BLF lamps on a Linksys/Cisco SPA9xx/5xx go yellow? I'm trying to differentiate between "On the Phone" and "DND" with the BLF. Thanks. -- James

Greetings list, Does anyone have any experiences they'd like to share deploying these phones in medium-size asterisk setups, e.g. 40+ users? I have a project coming up to deploy 100 phones over 2 offices and the client rather likes these phones. Are there any obvious pitfalls/configuration difficulties/quality issues etc. using these phones? If so, what alternatives would people suggest with