I was just browsing my local suppliers list of headsets - not a single one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. Can anyone recommend a headset that works with e.g. SPA-921 and -941? /Per Jessen, Z?rich
On 4/26/07, Per Jessen <per@computer.org> wrote:> I was just browsing my local suppliers list of headsets - not a single > one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. > > Can anyone recommend a headset that works with e.g. SPA-921 and -941?Try your local mobile phone supplier. I used a headset that came with one of my cell phones, and it worked great w/ my SPA-941. -erik
PGentilini@intellicare.com
2007-Apr-30 09:46 UTC
[asterisk-users] Re: headsets for linksys/sipura phones?
We are using VXI headsets with our Asterisk PBX as well as our legacy PBX's. A nice feature of these headsets is that you can use the same headset in either a USB port with their DSP translator cord or in a traditional rj-11 port with another cord. This adds some redundancy to your system if you want to enable both hard and softphones without buying all kinds of headsets. They work great with x-lite as well! http://www.vxicorp.com/ Paul
Wilson Pickett wrote:>> I have 4-5 different Nokias, none have a 2.5mm jack. Nothing that >> even remotely resembles a jack. > > The older ones did have 2.5 jacksInteresting - I wonder if this is due to different models being marketed in different places? I have a Nokia 7110 from around 1999 - no jacks whatsoever. /Per Jessen, Z?rich
JR Richardson
2007-May-02 08:19 UTC
[asterisk-users] Re: headsets for linksys/sipura phones?
> >> I have 4-5 different Nokias, none have a 2.5mm jack. Nothing that > >> even remotely resembles a jack. > > > > The older ones did have 2.5 jacks > > Interesting - I wonder if this is due to different models being marketed > in different places? I have a Nokia 7110 from around 1999 - no jacks > whatsoever.These work fine with the SPA-942's http://brandcell.stores.yahoo.net/planm1headha.html Plantronics M175, we get them for $23, but this site is cheaper. Regards, JR -- JR Richardson Engineering for the Masses