similar to: OT: Disable Polycom 650 Forward Softkey

I found on the web that there is way to customize the softkeys for the 7941/7961 phones. In the SEP<mac>.xml there is a section called "softKeyFile" where you can specify an xml file for the softkeys. I couldn't find any examples of this softkey file or the format to this file. Does anyone have a call manager enviroment where they can look at this file and send me an

Hi, Just started using an asterisk-based PBX with Polycom IP501 phones. Am Fairly satisfied and am starting to get into FTP setup of the phones. Have figured out most things except for how button remapping works. In sip.cfg, I have this entry: <keys key.IP_500.31.function.prim="DoNotDisturb"></keys> This works as expected but if I try to change the remapping to any

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Is there any way to program a soft key in ADSI to put a caller on hold. Then able to retreive that caller. Example - Softkey Hold Softkey Retreive Call Softkey End Call -gcc

Hello List, Does anyone have access to the soft key configuration files for the Cisco 7911/7941/7970/7971 phones? Checked up on the Cisco site and didn't find much up there. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part

Sorry for the crosspost. This was supposed to be on -users I know some of you are polycom gurus... Anyone know how to remove transfer from a polycom 33x phone? We've set allowtransfer=no, but we would like to remove a polycom soft key as well.

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

We upgraded to Asterisk 1.4.13 earlier this week, and now an odd problem has cropped up with our Polycom phones. Basically, performing a transfer via the transfer softkey fails on transfers to extensions beginning with a *. When you try, you just get a fast-busy, and next to nothing on the console (usually a message about the peer being unable to authenticate) This is only affecting

Hey Everybody, You may remember be as the one that was generally running in circles trying to get ADSI phones to work? Well, five phones later, I've got a phone and a code that works to program it. I have been discouraged from just posting it to an e-mail forum, but I have been encouraged to get it embedded in the program. Is this possible? How should it be done? Next, after getting it

I have a Cisco 7960 running 7.2 of their SCCP image; I am running Asterisk 1.0.5 and using the latest Sourceforge version of SCCP2. When I make a call (or receive one) the "Transfer" softkey does not show up - as a matter of fact only 2 softkeys show up (redial & something else), but those even are not active. On a 7960 running SIP the Transfer and other buttons do show up and are

Hi John, Kevin, Tor and Wiley (and everyone else) - >> I guess the phone just doesn't register as busy when there is only one >> call on a line. It has to have two calls on a line appearance to >> register as busy. Has anyone figured out how to disable this hold >> feature and just have the second call go to the second line, the third >> call to the third line,

does anyone know howto set the softkeys of an Cisco 7960 running on an asterisk server via chan_sccp ? Mit besten Gr??en Dirk Rieger

Has anyone been able to do the following: 1. Set the phone to automatically record all calls to the USB stick, now you have to press three keys. 2. Put Record on the main screen when a call is active. This would eliminate having to press the 'more' softkey. Thanks, Matt

Can anyone point me to info on how to change the functionality of the SIP (7.4) 7960's. We previously had an SCCP firmware on the phone and the users want the phone to work like it used too. Here are some examples: The users do not want to push the new call softkey or the speaker button in order to dial a call. They want to be able to just begin dialing the number. The users do not want

> Sergio schrieb: > >>> pressing the "End call" softkey while in call produces the message >>> "That key is not active here". Do I have to configure something >>> special for that to work or is it just not yet implemented? >> >> you can quick apply this patch >> > Ah, great... Thanks! > You don't accidentally have a

I have a function *1 that starts and stops recording in a call. I use a function so I can use MixMonitor. It works well, however I would like to make it a little more integrated for my users. We have GXP 200 hardphones. So far I've been able to configure a softkey using the speeddial option to dial *1 during a call. I also have setup another key to monitor the status of recording (on/off)

Hi, as noone out there seems to be able to maintain chan_sccp, i'm trying to switch to chan_skinny. With the newest 1.4 svn the Softkeys are mostly wrong/non functional. I see Redial NewCall CFwdAll more (more) CFwdBu... GPickUp Confrn more NewCall works, CFwdAll seems to toggle DnD, the rest of the buttons do notting. Any ideas how to fix this? Regards, Andreas

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

I am working with the telantek.adsi file, and I was wondering how I would create a softkey for Transfer. I tried making a key definition and using SENDDTMF "#", but that didn't work. Is there another way I could do this? Also, does anybody have any ADSI scripts for use with Asterisk that they would like to share? Thank you for your time. __________________________________ Do you

I don't know if Polycom decided to change their policy or not, but I just went to their website and when you click on the downlooad link, it will now present you with an option to join their extranet. I did that and I got the following message immediately: <snip> Access to certain Resource Center sections and content are subject to approval. Eligible members, will receive further