similar to: svn branches for dhadi and its tools

Hi. I am having problems with dahdi using kernel 2.6.32. I am using 2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv ++ dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r8670 DAHDI Version: SVN-trunk-r7445M Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart

Hi. When I dial a Dahdi extension using asterisk 1.6.0, and there is no answer, the extension hangs up, but the dial status is busy instead of no answer. How do I get this to work -- do I need to update dahdi? The card is an X400p using its FXS module. Thanks in advance for any ideas on this. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it?

Hi. I am using asterisk-1.8 and I am having problems getting conferencing to work properly. I did modprobe on dahdi and did load => chan_dahdi.so in /etc/asterisk/modules.conf. Now I do get conferencing, but meetme says [Jan 15 11:38:56] WARNING[9214] app_meetme.c: No DAHDI channel available for conference, conference recording disabled (is chan_dahdi loaded?) Now chan_dahdi is indeed

Hi. I am using gentoo kernel 2.6.27-r2 and dahdi trunk svn 5211 and it will not compile with this kernel whereas it does compile with 2.6.25. Here is the relevant portion of the build: VERIFY /usr/src/dahdi-trunk/drivers/dahdi/xpp/init_card_1_30 VERIFY /usr/src/dahdi-trunk/drivers/dahdi/xpp/init_card_2_30 VERIFY /usr/src/dahdi-trunk/drivers/dahdi/xpp/init_card_3_30 VERIFY

Hi. I have an asterisk system under Debian Leni using asterisk 1.8 with no Digium hardware -- and when I go into a meetme conference the system either locks up or is 100% cpu utilized or something -- I can't type anything and I have to physically reboot the system. The dahdi module is loaded and the last log entry is the playing of you are the only person in this conference,. How would I

Hello guys, I was wondering if it's possible to assign a dahdi channel to two diferent groups. Thanks Adolphe Cher-aime From my Iphone

On Tue, Apr 26, 2016 at 11:07 AM, Administrator TOOTAI <admin at tootai.net> wrote: > Le 26/04/2016 17:23, Mamadou NGOM a ?crit : > >> Hello, >> >> >> Having installed DAHDI to be able to use the meetme() application , when >> I start the dahdi service it generates me the following error: >> >> -bash: /etc/init.d/dahdi: No such file or

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;

Hello I have upgraded our asterisk box from zaptel to dhadi two weeks ago... Since, there has been quite a significant amount of echo when making a call. Only for the local outgoing call, the person on the other side doesn't hear any echo. This is with a TE-110P ISDN PRI card .. I've pretty much took the original zaptel configuration and used it as-is with the dahdi one ; to no

I finally decided it's been long enough using my ancient HP junker and I built a Atom 330 based machine to replace it. I've installed Centos 5, Dahdi and Asterisk 1.6.2. After a bit of struggles getting the 1.2 version files converted to 1.6 almost everything seems to be working. All my SIP lines seem to work and calls come in as expected and all my DAHDI lines work with incoming

Hy guys i am having so much hard time to setup asterisk on a virtual machine that i got , i just want to know if i really need to use Dahdi and libpri on a complete Digital PBX i just gonna use sip and iax. I will never use any kind of analog line on this machine. Wait for a feed back. Daniel Abreu.

Hello, I'm rather new to svn, so please, forgive me if this question sounds naive but is it normal that no trunk/ subdirectory is visible in http://svn.asterisk.org/svn/libpri/ ? I can see a trunk/ subdirectory in either asterisk, dahdi-linux or dahdi-tools. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

I did an svn check out of dahdi. I am running centos 4.7 on the make all I get an error. /usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile: No such file or directory make[4]: *** No rule to make target `/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile'. Stop. make[3]: *** [/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp] Error 2 make[2]: ***

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

I'm running dahdi on the host system, and have added the /dev/dahdi/ devices to the guest vserver as recommended in Beave's "Virtual Private Asterisk" whitepaper (http://www.telephreak.org/papers/vpa/). I tried copying libtonezone.so and libtonezone.h to the guest, but I couldn't anything to replace zaptel.h in DAHDI souce (it seems dahdi.h was deprecated?). I need to

I have a CentOS release 4.7 box running asterisk-1.4.26.1 with dahdi-linux-2.2.0.2 and dahdi-tools-2.2.0 I regularly get these messages, is this something i should be worried about? [Aug 21 01:05:07] VERBOSE[4343] logger.c: codec_g726.so => (ITU G.726-32kbps G726 Transcoder) [Aug 21 01:05:07] ERROR[4343] codec_dahdi.c: Failed to open /dev/dahdi/transcode: No such file or directory [Aug

Hello, Help need to solve Problem...kindly let me know how to solve the below problem now i have CentOS 5.3 (Final) I am new to Asterisk & Linux, I installed Cent OS and Updated all Packages. When i try MAKE ALL in dahdi-linux-complete-2.2.0.2+2.2.0 Folder it is showing the following error: [root at localhost dahdi-linux-complete-2.2.0.2+2.2.0]# make all make -C linux all make[1]: Entering

Hello Friends, I am trying to Installl dahdi on amazon EC2 which have Open-SUSE-11.1 X86 version. and here is snap of uname- a command *Linux ip-10-160-86-41 2.6.32.19-0.3-ec2 #1 SMP 2010-09-17 20:28:21 +0200 x86_64 x86_64 x86_64 GNU/Linux* when I try to run DAHDI distribution dahdi-linux-2.1.0.4 I am getting following error *echo "You do not appear to have the sources for the