similar to: Language Change on Polycom S IP 300

After an upgrade from asterisk 1.2.13 to 1.2.25 including upgrading libpri, zaptel, the incoming calls to a TDM400P REV I, with 3 FXO modules stop working. The board is working, I tested in another server with the 1.2.13 asterisk version. When a call is incoming, I do a ztmonitor to check the rx and tx values, but nothing appears on screen. Also changed the pci slot where the board is. The

Hi all: when i make a call from linksys pap2t to an asterisk server a fake ring is heard some times ,but when sending calls between 2 asterisk servers through sip no fake ring is heard but real one. any suggestions please. _________________________________________________________________ Windows Live?: E-mail. Chat. Share. Get more ways to connect.

We are running a PBX box for our small company's phone system. There are two phones on our network that are not working though. When I reboot a phone that works correctly, like this (note 4907 is the phones extension): asterisk -rx "sip notify polycom-check-cfg 4907" It returns this: Sending NOTIFY of type 'polycom-check-cfg' to '4907' and the phone proceeds to

I have 8 aastra phones that are loosing registration. On the phone gui it says 408 as the registation error after a minute or say they register. In the cli it eill say the phone is now unreachable then it will show it registering then available. At first they did it every hour all the phones. After messing with the experation it does it every 15 nin. Any ideas on how to troubleshoot this? I tried

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

I bought a couple Polycom Soundpoint 300's, and have them working nicely with SIP... but I'd like to be able to do automatic config via FTP, but it requires some XML config files. The docs discuss them in detail, but I can't seem to d/l them from Polycom. [No, it doesn't appear to be on the CD that comes with the phone.] I've created an account at Polycom's tech support

I've looked all over.. I can only find the polycom soundpoint ip 300 w/ sip @ atacom but they're all out of stock. Any input would be appreciated.. Thanks.

I have a quick question. I am using Asterisk 1.4. I have a user that has changed phones (grandstream budge tone 200 to a polycom 330). I have changed the sip.conf and extensions.conf. I have also unplugged the old phone and plugged in the new phone. I get the ext showing on the phone, but when I do a sip show peer 5000 the old ip address and phone show up. I did a sip reload and a dialplan reload.

I have an extension setup in my extensions.conf for hold music. ext. 600. If I pick up a phone (polycom soundpoint 300 sip) and dial extension 600 I hear the hold music playing. If I call another extension and pick it up and put the call on hold with the hold button on the phone I hear nothing at all. Does anyone have any experience with these phones and getting the hold button to work?

Hi, I'm trying to configure a Polycom IP Phone SoundPoint 500 to connect it to my Asterisk PBX but with no success. First of all, I downloaded the SoundPoint IP SIP Administration guide I found on internet and then I tried to make a boot server creating an FTP account on my Mandrake 9.1 Linux box but I needed the following files: 000000000000.cfg sip.cfg phone1.cfg ipmid.cfg sip.ld so I

Hi We've setup an Asterisk PBX recently and I encountered the following problem: When [mac address]-registration.cfg file includes the FQDN of the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even try to) register with the Asterisk PBX unless the DNS (it asks) successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this happen to anyone else? PS - The

Hello everyone, I have just received 3 brand new Polycom SoundPoint IP 600 from "voipsupply.com" and I have the exact same problem on all of them. When I receive a call, the phone is ringing correctly but when I answer it, it takes exactly 10 seconds before I can hear the caller. I also have SoundPoint 300 and 301 and I don't have that problem with those. I'm using Asterisk

All, I am looking at a little support on this, as I haven't found it on google yet. I have had this work on Callweaver, but am moving to Asterisk for a variety of reasons. My dial plans, and everything else transferred perfectly, though I am not sure they are 'correct' for Asterisk 1.6.1, with simple things like SIP users outlined in the sip.conf file, not in the users file,

Problem: Polycom SoundPoint IP phones (running SIP) ceases to send DTMF that Asterisk can detect and use. It worked in 1.0.5, but has not worked since. This has been verified on SoundPoint IP 300's and SoundPoint IP 600's. Workaround: It used to be that for DTMF to work, I had to set the mode in sip.conf to "inband". Without making any configuration changes on the

I'm replacing a SoundPoint IP 600 with a SoundPoint IP 650. I attempted to simply reuse the existing config files for the old phone on the new phone, but the new phone would lock up on the 4th digit when attempted to dial out certain numbers. So, I downloaded the newest firmware and config templates from Polycom, and attempted to migrate the settings. Seems I'm missing something from

I've got a couple Shoreline IP phones, their Shoreline model number is Shoreline IP 100. I believe this is actually a Polycom SoundPoint IP 300 phone. I believe the phone is using a MGCP stack. I want to use it for testing with Asterisk. 1. I suspect I need to re-image the phone to make it work with *. 2. How can I preserve the current image on the phone? 3. What is preferred image to use

Hi Folks; I just bought a Polycom SoundPoint 500 off of ebay after having spent way too much time trying to get updated sip images for our cisco phones. The phone I bought didn't have an AC power adapter; Could someone please tell me the volts & amps that the dc plug that comes with the phone puts out? Thanks! Mike

I'm trying to make an AMI call. I want to call a number, play an announcement when the call is answered, then call a second number and connect the two when the second call is answered. I an able to make a simple call to two numbers and connect them using the manager API but playing the announcement has me beat. Suggestions anyone? Bruce Ferrell

Hello all, I need the bootrom.ld file to set up some Polycoms I have Platform: Model=SoundPoint IP 330, Assembly=2345-12200-001 Rev=A I've publiched on my FTP files downloaded from http://support.polycom.com/PolycomService/support/us/support/voice/soundpoint_ip/soundpoint_ip330_320.html (3.2.3 combined and split zips) but my phones are still showing the message: "error, application is

I just got a Polycom soundpoint and I set it up using the phone and web based admin. I cant seem to figure out the config files and they are confusing me greatly and I dont have time for it :) Some things are odd, like on every reboot it seems the volume I set is reset? is there any way to fix that. And the ringer seems low. - Even all the way up Anyone willing to point out a good asterisk