Jose Flores Galicia
2008-Jul-15 00:24 UTC
[asterisk-users] Incoming calls on zaptel not answered.
After an upgrade from asterisk 1.2.13 to 1.2.25 including upgrading libpri, zaptel, the incoming calls to a TDM400P REV I, with 3 FXO modules stop working. The board is working, I tested in another server with the 1.2.13 asterisk version. When a call is incoming, I do a ztmonitor to check the rx and tx values, but nothing appears on screen. Also changed the pci slot where the board is. The zaptel drivers are load properly, I also have a TE110P on the same server as pri_cpe and has no issues. Has anyone of you suffered the same? how did you solve it? Thank you. -- Jose Flores Galicia <<FloJoSe at gmail.com>> BriefCode && Code Based Training -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080714/fa6a313d/attachment.htm
Hi Jose -> After an upgrade from asterisk 1.2.13 to 1.2.25 including upgrading libpri, > zaptel, the incoming calls to a TDM400P REV I, with 3 FXO modules stop > working. > > The board is working, I tested in another server with the 1.2.13 asterisk > version. > Also changed the pci slot where the board is.Hmm. Bad or incompatible PCI slot? Can you (at least for testing purposes) switch back to the original PCI slot you were using when the card worked? - Noah
On July 14, 2008 08:24:33 pm Jose Flores Galicia wrote:> After an upgrade from asterisk 1.2.13 to 1.2.25 including upgrading libpri, > zaptel, the incoming calls to a TDM400P REV I, with 3 FXO modules stop > working.THis isn;t going to fix your problem... but just FYI, you don't need to install libpri if you are just using a TDM400P (since its not a PRI / BRI [1.6 libpri does BRI as well] card). Might save you a little bit of time in the future, and its one less thing to consider as a problem. -- Matt Watson http://www.mattgwatson.ca