similar to: Receptionist SNOM-360

Hi folks, we use meetme application with pin so when a customer joins he's prompted for his name. Then the voice say:"press one to accept the recording..." My question is, is it possible to cut off that request to"press one"? Thanks to all -- .:FaberK:.

Does someone know coincidentally the cause for the error message specified in the Subject? The following scenario: Snom 360 behind one rout (wiederrum on a DSL line with static IP address hangs). The Snom has a private IP, routs accomplishes NAT. STUN and ICE are activated, as SIP haven 5060/udp are firmly used. Detailed packages passed on on haven 5060/udp of rout to the Snom. The telephone

Hi! I have the following questions/problems with * 1.4. We have several Snom phones (320 and 360). Hints are configured in extensions.conf (core show hints shows the correct values). My Snom phone is registered to some numbers (validated by using sip show subscriptions). I see the lights blinking if someone calls the subscribed number and steady lights if the call is established. So far, so

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I don't see any message when picking up a Snom 300 and dialing

Have someone running fine Alert-Info with a Snom 370 ( System Information: Phone Type: snom370-SIP MAC-Address: 0004132661BD IP-Address: 192.168.10.170 Firmware-Version: snom370-SIP 7.3.14 14961) i've tried exten => 200,1,SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-external) exten => 200,n,Dial(SIP/${EXTEN},30) Can see into the phone SIP trace is

Hi, does anybody know how to reboot a SNOM M3 base station remotely ? it does not appear to respond to a SIP NOTIFY REBOOT. I have a real problem with them becoming lagged and then not being able to phone. If I reboot the base station all is good again for a a couple of days. Has anybody else experienced this behavior ? Thanks, Phil

Hi List, I cant seem to find the setting that changes this! You put a person on hold, they are on hold like normal, but after a few seconds the phone will then start having dialtone coming from the speakerphone, really weird!! Anyone know how to fix this? I see where it could be nice, but in this case, we just want them on hold is all, no dialtone! Any help would be great! Thanks! Ron

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

What Asterisk command I can use to send a SIP INFO command? Thanks for pointers. Yuan Liu

I've been playing with Asterisk for a few weeks and it's working great. I have a question about getting multi-line receptionist phones working. I was thinking about getting one of these expansion ports: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet0 9186a008008883d.html What are people using for receptionist phones that show all the extensions in

I am looking at placing a system in an office with a central receptionist, and phones for each individual employee thereafter. Could I use a Snom 220 with additional keypads to view if the lines are in use by the other employees? Fred is in sales... A call comes into the receptionist and they transfer the call to Fred. The receptionist can tell Fred is still on the phone by viewing the assigned

Hi, We are looking towards a 8+ CO line setup (20 extensions) in our office but we do not want an IVR(auto-attendant) feature. All incoming will be answered by a receptionist. I have read the multi-line configuration for cisco 7960 thread in this list but that way I believe we could only display 6 incoming lines. What will happen to the rest? Does the expansion module for the cisco 7960 work

Hello, We are planning to replace our current PBX with an Asterisk / SIP solution, and are now trying to decide which phones to get. My first thought was the Cisco 7960G, but the Cisco licensing scheme irritates me enough that I'll probably end up going with either the Polycom IP-600 or Snom 360. If anyone has any opinions of these phones, especially in comparison to each other, I would

Hi everyone, Ive just installed a bunch of Snom 360s, and now having a NIGHTMARE of problems! Ive got a receponist phone with a extra sidecar on it. And when she gets 2+ calls and puts them on hold, when she goes to transfer them out the calls on hold get merged together. Somehow the calls on hold get merged and not to the extension needed!! Any help on this would be great guys, that would be

Use Snom phones. We have had around 6 participants, without problems. In theory you should be able to have around 12 people on a conference on a snom phone. Jon -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Yehavi Bourvine +972-8-9489444 Sent: 19. marts 2007 09:14 To: asterisk-users@lists.digium.com

Newbie question alert! I was just wondering how a receptionist phone would work with Asterisk. (I've never had a real job, so I've never really looked at different phone systems). I have looked around on the internet and seen that you can purchase 24 line phones; how does that get connected? What kind of wiring goes to the reception phone? How would I go about adding one of these to an

Hey Everyone, i am using Asterisk 1.4.21.1 with a old Patton SN1400 and some SNOM 300,320,360 Devices. In the combination with asterisk and the patton, there are occuring some strange behaviour, due to the calling and answering everything works good, clear voice, great availability. All the devices have to use ulaw, alaw and slinear is available but never the first choice since i use my

We recently deployed 10 SNOMs as part of a PBX hosted solution. We have one phone setup as the receptionist phone, using hints to show busy office lines. This all works as expected. This is a new installation, and people are just starting to setup their phones. For those of you not familiar with SNOM phones, there is a row of keys on the right side of the phone which SNOM calls function keys. In

Has anyone done any large scale intercom deployments with Asterisk? I've been asked about building a system to one-way page 500 phones simultaneously from a single server. My concerns are: - My limited math capabilities suggest 41 Mbps of RTP traffic, which seems like a lot, plus asterisk would be taking a single input stream and exploding it out to 500 endpoints. - There are 500

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of