similar to: Console/dsp, makes me sound like a Dalek

Hi I have installed CentOS 5 on my computer which has an Intel ICH5 sound chip. The card appears as it should, and I can adjust the volume just fine. However, when I try to play a sound file(.ogg for instance), rhythmbox plays through the file, but no sound is heard. I've tried as root, and I've tried doing cat /dev/urandom > /dev/dsp, and it's all quiet. Output from lspci:

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

i installed CentOS (and WBEL too) on a notebook gateway m520 and all work fine, but when i try to use the sound the notebook freeze. the soundcard is an intel i810_audio. somebody can help me, pls? PD: my english is no good.... :)

Hello! After upgrade to version 2.0, now using 2.0.1, I'm experiencing problems with glusterfs stability. I'm running 2 node setup with cliet side afr, and glusterfsd also is running on same servers. Time to time glusterfs just hangs, i can reproduce this running iozone benchmarking tool. I'm using patched Fuse, but same result is with unpatched.

https://bugs.freedesktop.org/show_bug.cgi?id=70388 Priority: medium Bug ID: 70388 Assignee: nouveau at lists.freedesktop.org Summary: [NV34] failed to idle channel 0xcccc0000 Severity: critical Classification: Unclassified OS: Linux (All) Reporter: rosti.bsd at gmail.com Hardware: x86 (IA32)

Hi list! I have an Asterisk server (1.2.14) connected to a E1 line via a TE410P, and some PAP2NA connected to it. The PAP2 DTMF configurations is set to INFO and Asterisk to INFO too. At first, is INFO method different from RFC2833?? Well, I have two problems. The first is that when I place a call to outside, via E1 trunk, sometimes I get some DTMF tones and I'm sure nobody hit any key. Seems

Hello everyone, I''m totally new to Xen and trying to run it on some platforms (x86, x64) using SLES (that is what I have to use for reasons other than technical). Several machines on which I tried using Xen simply fails to run normally using Xen kernel: either network communication is not functioning at all despite proper configuration (that works on non-Xen kernel), or the kernel

Does anyone have any experience with Super-Micro brand motherboards // dual Xeon cpu's? Had to swap out my Tyan piece of junk and going back with the S-M board. I believe it has similar north/southbridge chips on it -- at least they are the intel MCH ICH5R and PXH plus the 82546GB. One area that the Tyan board was seriously lacking in was in the hardware monitoring department. The S-M

Hi, I'm trying to install a Junghanns quadbri for a few days but i stay with an asterisk error. (Everyone is busy/congested ) Asterisk is working with a Fritz PCbut from one year and now i want to add the quadbri. The quadbri card has been configured in NT mode and with no 100 ohms S/T termoination. (I'm not sure if the S/T parameter is correct) I have installed the bristuff package

I have a workstation with a Gigbyte board and an Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) that's apparently getting bitten by https://bugzilla.redhat.com/show_bug.cgi?id=502499 It's running CentOS 5.4 32 bit, and the user is suffering from high load and sluggish response whenever a disk write of more than a few MB is made. iostat shows the disk at 100%. [root at marge

During the last two weeks there has been some discussion in freebsd-questions and freebsd-stable about the prospects of FreeBSD support for some motherboard devices associated with the Intel 865PE/875P and ICH5/ICH5R support chips now showing up in recent motherboard designs. The 865PE/875P chips are called MCH (memory controller hub) or "northbridge" chips. The ICH5/ICH5R chips are

Hello, I have a Dell PowerEdge 2850 that periodically (6 times in the last 24 hours) freezes, requiring a power cycle in order to come back. The machine is running a Xen 2.0 stable source install. Here is the appropriate Grub entry: title Xen 2.0 / XenLinux 2.6 kernel /boot/xen-2.0.gz dom0_mem=131072 module /boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0 Dom0 boots happily, and new

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

Greetings list, We have an issue with call quality at 2 sites where the users (4 Elmeg IP290s at one site, 2 SPA942s at the other) do not have an asterisk box on-site. Each site has an 8mb down/448k up ADSL connection and the phones connect via SIP to an asterisk box in a datacentre using g729. The asterisk box in the datacentre connects to our other asterisk boxes providing pstn connectivity

Here are the relevant details. all help is greatly appreciated. xenbox linux # uname -a Linux xenbox.localhost 2.6.14-gentoo-r2 #2 Mon Dec 5 16:17:58 Local time zone must be set--see zic manua x86_64 Intel(R) Xeon(TM) CPU 3.00GHzGenuineIntel GNU/Linux xenbox linux # lspci 0000:00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) 0000:00:00.1 Class ff00: Intel Corporation

Hello, I have two TE-405Ps that I am having trouble with. I'm using an Intel 865 motherboard with a Celeron D processor. Kernel 2.4.26, Slackware 10.0. my /proc/interrupts: CPU0 0: 172317 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 2003 XT-PIC eth0 8: 1 XT-PIC rtc

I've submitted a bug on this issue, but I'm hoping to find a workaround that may help resolve the bug or get me to where I want to be - racing this game. Wine 0.9.22-9ubuntu3 (edgy) Installed on Ubuntu - Edgy Eft (2.6.17-10-generic) I did not compile this, installed as a package via Ubuntu's App Manager I don't use Windows with wine Application: NASCAR 2003 (CD Installed version,

Hey Jeremy, Please pull from devel/pat (based off your xen/dom0/core tree) which has one patch: Konrad Rzeszutek Wilk (1): xen/pat: make pte_flags(x) a pvops function. which is neccessary for the drivers/gpu/drm/radeon driver to work properly with AGP based cards (which look to be the only ones that try to set WC on pages). Also please pull from devel/kms.fixes-05 (based off your

Does anyone know if support for the Intel 875P/ICH5 motherboard chipset has yet made it into the stable branch? (Is release 4.9 likely to have it?) I am mainly interested in the IDE and "native" serial ATA devices. There is also a new Intel ethernet controller chip, 82547EI, that is designed to interface directly with the 875P chip. The currently supported chip list only goes up to