similar to: asterisk-1.2.26.tar.gz Thoughts?

I'm having trouble getting an Asterisk server to make outbound calls on my iDCS Trunks. I have idcs station to asterisk station working I have asterisk station to idcs station working However, I am unable to get Asterisk to utilize any outbound trunks on my iDCS.... Anybody have any ideas? ________________________________________________________________ Sent via the WebMail system at

I'm installing the new Slackware 10.0 distribution - but not sure if i should go with the 2.4 kernal - which i think is the default install - or the new 2.6 kernal? anyone running * and slackware 10.0 with 2.6 kernal? thanks joe

What is the recommend Digium Card for a PRI in NA ? I want to interface a Asterisk Server to a Samsung iDCS System, and have available T1 w/DNIS, or a PRI w/DID, the asterisk server would need to appear as a "Telco" provided Circuit. Slot Availability. Four PCI-Express Slots x8 (1 full-length/1 half-length/2 low-profile).

Is there a description or statement that describes the stock kernal in CentOS, and would give all the various modules it is compiled with? As with BSD, I assume there are things in the kernal that are mandatory, and then there are things that are optional or included so as to catch most everything one could have w/r/t hardware. That being the case, as with FreeBSD, removing those unneded

My * is presently running fine on Mandrake 9.2, but Ive been entertaining moving to Mandrake 10.0 to enjoy the obvious improvement in kernal speed Im seeing on other 10.0 boxes Ive recently built for other applications. (10.0 is the first implementation of the 2.6 kernal) Any comments from anyone who's running on 10.0? IS anyone running * on Mandrake 10.0? If so, any issues stand out?

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

I am an undergraduation and I am planning to do a known to do ( KERNAL 32) as my Final Year Project. I was wondering what should be the capabilities to successfully complete it within one year. Keeping in mind, I am new to this emulator.

Dear R-list, I have made a simple kernel density estimation by x <- c(2,1,3,2,3,0,4,5,10,11,12,11,10) kde <- density(x,n=100) Now I would like to know the estimated probability that a new observation falls into the interval 0<x<3. How can I integrate over the corresponding interval? In several R-packages for kernel density estimation I did not found a corresponding function. I

I've got an ugly problem... hope somebody can help: I upgraded from Samba 2.2.5a to 2.2.7a yesterday (SuSE RPM update). Since then, all connected Windows computers show strange behaviour: Depending on the computer, only a few selected users can log in - but the users able to log in change from computer to computer. None of them have any local accounts on the machines in question, just the

Any Recommendations on a "Good" Wireless Voip Keyset that works well with Asterisk? I would prefer one that is IAX2 as it works better behind a Nat'd Firewall.. But I am reaching out to you guys as you all would know what would work the best :-) ________________________________________________________________ Sent via the WebMail system at kotbh.net

Hi all, I've got a Centos 5.1 kickstart that I must continue to use. How can I update the kick start image so that it recognizes Intel gigabit 82576 nic? BTW, I compiled the driver I need and have this igb.ko file. How do I incorporate that into my initrd.img file that I see on the kickstart CD that is probably my kickstart boot OS. Thank you very much in advance. aurf -

I just tried, on a whim, to use an OpenSSH client vs SSH 1.2.26 client, and I can connect with it... Something drastic change between pre23 and pre24? Then again, I can't get pre23 to work anymore either, after further investigation :( OpenSSH clients connect no problem, just not the old SSH 1.2.26 clients ... Marc G. Fournier marc.fournier at acadiau.ca

dear all i need driver for IC CY7C68001 (cypress semiconductor) for linux .can anyone guide me for this driver link? i am running my exe through Wine.. so wheter wine will automatically pick the driver from kernal or i have to add this driver into the W ine lib ?? regards

Hi , I am facing a strange problem .I am unable to install CentOS 4.0 on my HP DL145 G2 Server .I am getting the following error RAMDISK: couldn't find valid RAM disk image starting at 0. Please append correct "root=" boot option VFS: cannot open root device "<NULL>" or unknown-block (3,3) Kernal panic - not syncing VFS unable to mount root fs however CentOS 3.5

Is there anyway to support NFTS security on linux. it might mean compiling a new file system into the kernal? I don't know. Is there a how to that anyone can point me to. Sorry for the basic question, Michael

On 9/19/2017 9:51 AM, Jerry Geis wrote: > I was doing an update to 7.4 and somewhere in middle the machine died. > > If I drop back to a previous kernel the machine is alive. So how do I say > "forget the previous yum update" and start all over and do it again. > > Booting into the new kernel I get a kernel fault. So going back one level > on teh boot screen solves

Hello All, I am trying to compile Asterisk under RedHat 8. I downloaded (checked out) the sources from CVS as described on the Asterisk download page. When I start to compile Zaptel, soon after compilation starts, it errors out. As far as I know I have all the OpenSSL and readline and kernal development stuff installed. I usually do a "install everything" when I install RH Linux on a

Hi, I have a problem on my mac when trying in R to produce png images. I am getting this warnings with the ArrayQualityMetrics package: > arrayQualityMetrics(rma_fatBody, outdir="normData", force =T) The report will be written into directory 'normData'. KernSmooth 2.23 loaded Copyright M. P. Wand 1997-2009 (loaded the KernSmooth namespace) libpng warning: Application built

Hi, Yesterday I upgraded to kernel 2.6.8 on my Fedora Core 2 system. This caused a problem with the version of wine I'd been using (20040505), so I upgraded wine to the current version (20040813). The remaining problem is as follows: I'm calling wine like this: wine start.exe vcbuild.bat and vcbuild.bat contains the following: set QMAKESPEC=win32-msvc.net set