similar to: Snom 370 buton Recordings

Does anyone have any suggestions for a decent receptionists phone? Aastra? Grandstream? Something with (potentially) lots of BLFs, large(ish) screen, headset and most importantly the ability to transfer calls? I've installed five Snom 370s that seemed ideal but my client is very very unhappy as the Snom 370 can't transfer a call correctly if there's another call coming in (details

Hi all, I'm not getting any sidetone on my Snom 370. I searched the web and the snom wiki, but I don't see any place to enable/adjust it. Callers say I sound great on the other end, but I don't hear myself so it is a little off-putting. Any suggestions would be appreciated. On a related note, some times (maybe 1 out of 10 calls) I get the side tone, but its delayed by a second or

Have someone running fine Alert-Info with a Snom 370 ( System Information: Phone Type: snom370-SIP MAC-Address: 0004132661BD IP-Address: 192.168.10.170 Firmware-Version: snom370-SIP 7.3.14 14961) i've tried exten => 200,1,SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-external) exten => 200,n,Dial(SIP/${EXTEN},30) Can see into the phone SIP trace is

Hello all, I've to deploy about 200 snom320 phones on a instalation. Do you know any knid of tool to help me with this amount of phones? I'm thinking in a provisioning tool which I use for setting up the phones. Any clue would be welcomed. Thanks. Voip-Crazy

Hello all, Anyone expecialized with call center monitoring and reporting solution based on asterisk. A client of us, want to install a call center reporting solution for an asterisk server but I do not know which could be the best tool for that. I need a tool for reporting queue calls, agent calls, and disconnect cause. Any clue will be appreciated. Thanks in advance. VoipCrazy

Hello Happy New Year to all!! I've just completed porting from Asterisk 1.2 to 1.4. I did this by doing a clean install on a new box, and moving over configuration and scripts where needed. All went surprisingly well! Anyway, one lingering issue is that the function key "lamps" on our Snom phones have all stopped working! We're using a mix of Snom 290/320/360 phones and

Hi all, I am looking for phones witch support POE, with a good relation between quality and price to work with asterisk. I just see the Thompson st2030 and the Linksys SPA 922 an SPA 942. Witch of this phones or another ones gave you the best results in a productivity enviroment? Thanks in advance. VoipCrazy. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I need to conect an Asterisk with an Alcatel OmniPBX 4400 using an E1 port. It is the first time I make this kind of connection and I do not know exactly how to get it working. Someone has experience with this kind of connection? Could you paste a zapata.con and zaptel.conf files with QSIG configuration? Any clue will be wellcomed. Thanks Voipcrazy -------------- next part

Hello all, I need to install asterisk for 900 sip users with 2 PRI ports. It is posible to handle this number of calls/extensions with only one asterisk machine? Which is the best way to install that? two asterisk with openser. One asterisk with openser ..... Is it necesary run a SER server on this enviroment? Any clue will be welcomed. Thanks in advance. VoipCrazy

Hello all, I'm trying to conect two asterisk servers using two B410p Digium cards. One card on each server. I just setting up the first BRI port on server A as nt_ptp and the first BRI port on server B as te_ptp. I use an ethernet wire to connect the first port of server A (nt_ptp) with the first port on server B (te_ptp) but the port light cotinues blinking on red on both sides once the

Dear list, I need to setup asterisk to send and receibe fax. I just looking about SpanDSP, Hylafax/Iaxmodem, AsterFax,...etc. The asterisk box has Digium hardware, one TE420B and one TDM2402 (8 FXO ports). I just read the SpanDSP (txfax and rxfax) makes the system more unstable that Hylafax/Iaxmodem. And the Asterfax solution does dislike cause its licensing. The TE420B, is configured in E1

Dear list, We have an weird problem with our FXO card (TDM01B). When I made a call using this channel, all goes well, the called phone rings but when the called phone answers the call. In me handset I can hear an weird sound like a "Clack". I tryed diferents TDM cards and modules, and my zapata.conf is like, language=en context=from-zaptel switchtype=national usecallerid=yes

When the asterisk a queue reset their counters? I 'm talking about this kind of info in asterisk console. >show queue 600 600 has 0 calls (max unlimited) in 'ringall' strategy (4s holdtime), W:0, C:14, A:8, SL:0.0% within 0s I just say that because I have a queue with strategy "Fewest Calls" working for a couple of mouths, and a new agent has been added this

Dear list, I am trying to configure the nagios plugin called check_sip. I just read the README file included with the plugin. I follow the readme steps to configure the plugin, without success. In the nagios web interface I can see (No output!) In the status information column. If I run the chech_sip plugin from a linux console, I get /usr/local/nagios/libexec# ./check_sip -u

Dear list, I need to buy a phone which could monitor the state of the maximun number of sip extensions about 200. It is for an attendant. I just saw Snom 370 with keypad and Linksys 962 but they do not let me to monitor 200 extensions states adding keypads. Do you know any kind of phone that let me do that? Which is the maximun number of extensions your phones can monitor and which models phones

Hello, If I run the script : "a<-2 ; a<-a+5 ; a" whith the "submit" buton in Rcmdr the result is 12 !!! But if I run the script "a<-2 ; b<-a+5 ; b" there is no problem and the result is 7. I think there is a bug in the function "onSubmit". Thanks, [[alternative HTML version deleted]]

Hello all, Recently I just instaled asterisk-1.2.14, zaptel-1.2.12, libpri-1.2.4 and Freepbx v.2.2.0. My zapata.conf look like this, (Pasted bellow) The problem is that the asterisk never send the callerID to the phones. I just take a look to the cdr database an there is no callerid too. I do not know why the calledID is not receibed. All this FXO ports are conected to a mobile lines and if I

I think I have my echo problem solved, now i need to tackle the MWI. I can't seem to get it to light up. I'm using Asterisk 1.4.14. Here's a section from my sip.conf for my test phone: [general] context=internal allowguest=no allowoverlap=no allowtransfer=yes notifyhold=yes bindport=5060 bindaddr=0.0.0.0 srvlookup=yes pedantic=yes vmexten=9998 at internal ;vmexten=*97

CentOS-6.5 (FreePBX-2.6) Asterisk-11.14.2 (FreePBX) snom870-SIP 8.7.3.25.5 I am having a very difficult time attempting to get TLS and SRTP working with Asterisk and anything else. At the moment I am trying to get TLS functioning with our Snom870 desk-sets. And I am not having much luck. Since this is an extraordinarily (to me) Byzantine environemnt I am going to ask if any of you have gotten

Dear all, I have got a PRI line with E1 20 channels, my question is: span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 If this is my zaptel config for an E1 PRI line, Which would be the config for a reduced PRI line for 15 channels? and for 20 channels? Thanks in advance. VoIPcrazy -------------- next part -------------- An HTML attachment was scrubbed... URL: