asterisk users - Feb 2008 - Snom 300 MWI

I think I have my echo problem solved, now i need to tackle the MWI.  I 
can't seem to get it to light up.  I'm using Asterisk 1.4.14. 
Here's a
section from my sip.conf for my test phone:


[general]
context=internal
allowguest=no
allowoverlap=no
allowtransfer=yes
notifyhold=yes
bindport=5060
bindaddr=0.0.0.0
srvlookup=yes
pedantic=yes
vmexten=9998 at internal
;vmexten=*97
disallow=all
allow=ulaw
allow=ilbc
mohinterpret=default
mohsuggest=default
language=en
useragent=TCTC PBX
;dtmfmode = info
fromdomain=10.10.60.253
;relaxdtmf=yes

[15]
username=15
host=dynamic
type=friend
context=internal
secret=edited-out
subscribecontext=internal
dtmfmode=rfc2833
;defaultip=10.10.60.246
mailbox=15
;subscribemwi=yes
notifymimetype=text/plain 
checkmwi=10                  
vmexten=9998 at internal
disallow=all
allow=ulaw

All of my sip phones exist in the "internal" context and I have the 
appropriate extensions (I think) set up.  In my voicemail.conf I have an 
[internal] section with the mailbox 15 defined with password 1234.  I 
can make and receive calls from the phone, but the SIP phone does not 
light up.  The phone is running firmware version 7.1.30,  Not sure what 
goes in the "mailbox" line of the sip identity on the phone.  With
"sip
set debug peer 15" on the Asterisk CLI I don't see any
"Notify" messages
go by.  I've been searching google for about 2 days on this and haven't 
come up with anything useful yet.  Everything I see indicates it should 
"just work".

Thanks,
Brent Davidson

Brent Davidson wrote:
> I think I have my echo problem solved, now i need to tackle the MWI.  I 
>
> [15]
> mailbox=15
>   
Should be mailbox=15 at internal

Doug


-- 
 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."

Nevermind...  I found the appropriate mojo.  The key was putting 
mailbox=mailbox at context,password and removing the subscribemwi=yes.  (I 
think that's all it required.  Among the other 1500 things I've already 
tried, there may have been some residual.)

Thanks,
Brent
.
Brent Davidson wrote:
> I think I have my echo problem solved, now i need to tackle the MWI.  I 
> can't seem to get it to light up.  I'm using Asterisk 1.4.14. 
Here's a
> section from my sip.conf for my test phone:
>
>
> [general]
> context=internal
> allowguest=no
> allowoverlap=no
> allowtransfer=yes
> notifyhold=yes
> bindport=5060
> bindaddr=0.0.0.0
> srvlookup=yes
> pedantic=yes
> vmexten=9998 at internal
> ;vmexten=*97
> disallow=all
> allow=ulaw
> allow=ilbc
> mohinterpret=default
> mohsuggest=default
> language=en
> useragent=TCTC PBX
> ;dtmfmode = info
> fromdomain=10.10.60.253
> ;relaxdtmf=yes
>
> [15]
> username=15
> host=dynamic
> type=friend
> context=internal
> secret=edited-out
> subscribecontext=internal
> dtmfmode=rfc2833
> ;defaultip=10.10.60.246
> mailbox=15
> ;subscribemwi=yes
> notifymimetype=text/plain 
> checkmwi=10                  
> vmexten=9998 at internal
> disallow=all
> allow=ulaw
>
> All of my sip phones exist in the "internal" context and I have
the
> appropriate extensions (I think) set up.  In my voicemail.conf I have an 
> [internal] section with the mailbox 15 defined with password 1234.  I 
> can make and receive calls from the phone, but the SIP phone does not 
> light up.  The phone is running firmware version 7.1.30,  Not sure what 
> goes in the "mailbox" line of the sip identity on the phone. 
With "sip
> set debug peer 15" on the Asterisk CLI I don't see any
"Notify" messages
> go by.  I've been searching google for about 2 days on this and
haven't
> come up with anything useful yet.  Everything I see indicates it should 
> "just work".
>
> Thanks,
> Brent Davidson
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>