Hello Happy New Year to all!! I've just completed porting from Asterisk 1.2 to 1.4. I did this by doing a clean install on a new box, and moving over configuration and scripts where needed. All went surprisingly well! Anyway, one lingering issue is that the function key "lamps" on our Snom phones have all stopped working! We're using a mix of Snom 290/320/360 phones and we used to have them setup so you could see if certain extensions were ringing or engaged. Since moving to 1.4, all of them have stopped working. The Snoms themselves are configured in exactly the same way, and it doesn't matter what I try on the phones I can't get them working again. Been through lots of stuff in the forums, and as far as I can tell I have got the hints setup correctly and everything *should* be working fine. There must be something different within 1.4 that I'm missing? Any ideas would be appreciated! Cheers Phil Knighton Support Engineer MJog Support Team Soft Option Technologies Ltd The Old School, 23 High Street, Wilburton, Cambridgeshire, CB6 3RB Tel: 01353 741641 | Fax: 01353 741341 | Email: info at mjog.com <mailto:info at mjog.com> | Web: mjog.com <mjog.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: lists.digium.com/pipermail/asterisk-users/attachments/20080102/700b9444/attachment-0001.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 16366 bytes Desc: MJogClockOriginal4.jpg Url : lists.digium.com/pipermail/asterisk-users/attachments/20080102/700b9444/attachment-0001.jpeg
Hi, Phil Knighton wrote: >Been through lots of stuff in the forums, and as far as I can tell I >have got the hints setup correctly and everything *should* be working >fine. There must be something different within 1.4 that I'm missing? > I'm using hints on an asterisk 1.4.13 together with SNOM 300/360, without a problem. Which asterisk version are you using? How did you configure the SNOMs and the hints in your dialplan? Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Geschaeftsfuehrer Moltkestrasse 49 D-76133 Karlsruhe Tel./Fax : +49 (0)721 / 83044 - 98/93 in-put.de ******************************************** Schulungen Installationen Beratung Support Voice-over-IP-Loesungen ********************************************
Phil Knighton wrote:> Been through lots of stuff in the forums, and as far as I can tell I > have got the hints setup correctly and everything *should* be working > fine. There must be something different within 1.4 that I'm missing?Yes, the "metermaid" format changed slightly. See the "Parking Lot Status / Access from the Programmable Buttons / LEDs - Asterisk 1.4.x" section of voip-info.org/wiki/view/Asterisk+phone+snom. - Mike
Quoth "Phil Knighton" <phil.knighton at mjog.com>>I've just completed porting from Asterisk 1.2 to 1.4. > >Anyway, one lingering issue is that the function key "lamps" on our Snom >phones have all stopped working!I'm using Snom's with 1.4.X The fkeys on the Snom's are set to Type "Extension" and the number is "<sip:123 at 192.168.5.6>" (no quotes). This also means that you can press "John's" button to ring his phone. Works for me (ISTR the hints for sip phones are automagically generated by Asterisk 1.4.X; check it with CLI> show hints). I also use func_devstate module and Snom buttons to do things like light up when a group is in night service. I've a hint like so: exten => 200,hint,Custom:nightservice200 in my dialplan and point a Snom button at <sip:200 at 192.168.5.6>. Then in my dialplan that sets/clears nightservice I have the following: exten => _*20*200.,n,Set(DEVSTATE(Custom:nightservice200)=INUSE) and exten => _*21*200.,n,Set(DEVSTATE(Custom:nightservice200)=NOT_INUSE) Voila! The group gets put into night service and the corresponding light on my Snom370 comes on. HtH -- Regards, Russell -------------------------------------------------------------------- | Russell Brown | MAIL: russell at lls.com PHONE: 01780 471800 | | Lady Lodge Systems | WWW Work: lls.com | | Peterborough, England | WWW Play: ruffle.me.uk | --------------------------------------------------------------------
Quoth "Phil Knighton" <phil.knighton at mjog.com>> >I've incorporated the kind responses from other list members, such as >setting call limits but to no avail! I've checked the function key >settings on the Snom, and adjusted it to match the suggestion from >another list member - nothing. Not one lamp on any of the phones will >work, and I'm completely baffled as to why.A wild stab in the dark.... what version of the Snom firmware are you running? The lamps work for me on a Snom 370 running 7.1.28 and worked on other 7.1.<last few releases but can't remember how far back>. -- Regards, Russell -------------------------------------------------------------------- | Russell Brown | MAIL: russell at lls.com PHONE: 01780 471800 | | Lady Lodge Systems | WWW Work: lls.com | | Peterborough, England | WWW Play: ruffle.me.uk | --------------------------------------------------------------------