similar to: Leading 0 in PRI outbound

All, Am running asterisk on an Opteron 165 with 4GB RAM and 1x80GB and 1x320GB SATA for a call center application (running VICIDIAL). Asterisk CLI (accessed by screen logging asterisk on startup and entering the allocated screen) gives me 'Warning LSP Low' and the voice quality goes down when this message pops up! That is, to start, we use: `/usr/bin/screen -L -d -m -S asterisk

All, I have around 10 opteron 165 servers all running Fedora Core 5 and Asterisk 1.2.x (mostly Asterisk 1.2.16) with 15-25 channels of g729 each. They register without any problem but I had to use the codec_g729.so corresponding to the i386 version in all of them (asterisk would not start if i tried the opteron specific one). The problem: In one of the servers, we seem to lose the registration

Am using perl AGI to invoke the dial command thus: $AGI->exec('Dial',"$numtodial2|30|L($maxcall:$msgtime)|M(conn^1002)"); What I expected that this will do is: 1. call the number using the string $numtodial2 - works OK 2. Set call limit to $maxcall and play a message $msgtime milliseconds before the call - works OK 3. On connect of the call send it to the macro conn

Hi I am a newbie to puppet and I am going through the documents at " http://docs.puppetlabs.com/learning/manifests.html" the exercise were working normally then suddenly puppet hangs when I tried to apply a manifest root@nscbose:/home/bala/puppet# puppet -V 2.7.11 root@nscbose:/home/bala/puppet# cat /etc/debian_version wheezy/sid root@nscbose:/home/bala/puppet# ps aux | grep -i puppet

From: samba-bounces+r.natarajan=f5.com@lists.samba.org [mailto:samba-bounces+r.natarajan=f5.com@lists.samba.org] On Behalf Of Ravi Natarajan Sent: Friday, November 11, 2005 1:11 PM To: samba@lists.samba.org Subject: [Samba] STATUS_OBJECT_NAME_INVALID error Hi, I tried to access a file share on a Windows 2003 server that has around 150 other directories. It didn't succeed, the tcp dump

I can't seem to hide and/or set my caller ID from *. I'm using a quite recent (three weeks or so) CVS with an E400P card. I have pridialplan=unknown in zapata.conf and I'm based in the UK. The relevant bit of pri debug looks like this (reformatted to fit 80 char width): > Calling Number (len= 4) [ Ext: 0 > TON: Unknown Number Type (0) >

Hi. recently I have been trying to setup a PRI on asterisk. Inbound calls are working just fine but I am not able to make outbound calls. Does anyone know what I need to change to make outbound calls work? Right now the PRI is instantly hanging up on the outbound calls. I have included full debug info as well as config files. /etc/zaptel.conf span=1,1,1,esf,b8zs bchan=1-23 dchan=24

Hey everyone ! I have a problem in making outbound calls in PRI connection. I have E1 PRI airtel connection [ India ] [ asterisk-1.2.12.1 on CentOS 4.4 ] zaptel.conf ---------- [channels] language=en usecallerid = yes hidecallerid = no callwaiting=yes threewaycalling = yes usecallingpres=yes transfer = yes echocancel = yes echotraining = yes immediate = no ;group=0 ;context = from-pstn

Hi I am trying to install vim-puppet for syntax highlight of puppet manifest file. I first installed vim-puppet and then vim. Then I ran "vim-addon-manager -w install puppet" I am still unable to see the colours on site.pp bala@WheezyMaster:~$ vim-addon-manager # Name User Status System Status editexisting removed removed justify

Hi I am getting the following error when i tried to install rails in windows using command prompt.... Attempting remote installation of ''rails'' Updating Gem source index for: http://gems.rubyforge.org ERROR: While executing gem ... (Gem::RemoteSourceException) Error fetching remote gem cache: getaddrinfo: no address associated with hostname. There are proxy settings in

Hi all I have installed AAH 2.2 in my P4 PC following AAH handbook PDF and http://mundy.org/blog/index.php?p=62#amp and made as per the guide says and downloaded SJ Phone, and registered user and when i try to dial the 19197543700 i get message that, all circuits are busy now, please try your call later and when i see in the console i get this mesage any help Called easycall/19197543700

I run a SIP-only shop with a 23 channel PRI and single T100P. Here are my configs: /etc/zaptel.conf: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us /etc/asterisk/zapata.conf [channels] context=default switchtype=dms100 signalling=pri_cpe pridialplan=unknown rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=no hidecallerid=no callwaiting=no

We have an old Telrad 128KSU PBX to which I am trying to connect asterisk in the following manner: Current Setup: Telco-> T1->PBX Desired Setup: Telco-> T1-> Asterisk-> T1-> PBX. I am first trying to setup the Asterisk -> T1->PBX part without disturbing existing setup so I can get asterisk to forward calls to PBX and once that is done, I would try to move the telco

Is the order important when installing ocfs2 and Oracle RAC? If you have an existing RAC installation and you want to use ocfs2 for shared files but not for the OCR or Voting Disks, do you need to reinstall the Oracle Clusterware after installing OCFS2? Regards, Nick Donatone -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, the scenario: Carrier ----S2M------ * -----S2M------Siemens | | SIP Clients and many other features With much help from the list, the PRI links are without alarms and inbound calls are working fine (from both: Carrier and Siemens). But I am not able to dial wether outbound nor to the Siemens PBX. I allways get the message: == Everyone is busy

We have just had an ISDN PRI service commissioned here in AU (using Powertel as provider). I have called them and ensured that we have the ability to set Caller ID on our service to any number in our 100 number block, and I have been assured that everything is OK from their end (unlikely). Every time I drop a sample.call in to /var/spool/asterisk/outgoing with the Callerid: option set, the

Hi Is there a way for puppet to create cron job on each of my node based on my gateway''s IP ? bala@bala-desktop:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.2.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0

I'm in the process of turning up a PRI in one of my markets and have run into a problem I have never seen before. I am unable to place a local outgoing call. Long Distance over the same PRI works fine. When I attempt to place a local call using the PRI I see Asterisk attempt to dial, and am greeted with a busy signal. This signal appears to originate on the telco's switch. I have had

While listing shares with command like: smbclient -L 192.168.0.4 -N , shares with length of name more than 12 (that ability appeared in Win2000) are just not listed. But if know their names, I can mount them (using mount_smbfs). How can I see these shares while listing?

Pls sends your CV in www.allindiajobbank.com website. It is fast and gives U positive response. Pls pass this message to Ur friend also because vacancies are waiting. IT SALES EXECUTIVE Job Description :- Lead Generation & Generating customers by Tele-calling Calling prospective customers and explaining them about the services. Lead generation and successful conversion of leads. Education