thr3ads.net - asterisk users - [Asterisk-Users] problame with outbound calls on pri [Apr 2006]

If this information is useful, please help other people find it:
Share via:

Doug Langley

2006-Apr-29 22:33 UTC

[Asterisk-Users] problame with outbound calls on pri

Hi. recently I have been trying to setup a PRI on asterisk.  Inbound 
calls are working just fine but I am not able to make outbound 
calls.  Does anyone know  what I need to change to make outbound 
calls work?  Right now the PRI is instantly hanging up on the outbound calls.
I have included full debug info as well as config files.


/etc/zaptel.conf
span=1,1,1,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us

relevant portions of zapata.conf:
[trunkgroups]
[channels]
language=en
context=from-pstn
pridialplan=unknown
signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
;signaling=em_w
switchtype=4ess
group=0
channel => 1-23


debug info:
     -- Executing Dial("SIP/202-2d92", "zap/g0/18005551212")
in new stack
-- Making new call for cr 32771
     -- Requested transfer capability: 0x00 - SPEECH
 > Protocol Discriminator: Q.931 (8)  len=48
 > Call Ref: len= 2 (reference 3/0x3) (Originator)
 > Message type: SETUP (5)
 > [04 02 80 90]
 > Bearer Capability (len= 4) [ Ext: 1  Q.931 Std: 0  Info transfer 
capability: Speech (0)
 >                              Ext: 1  Trans mode/rate: 64kbps, 
circuit-mode (16)
 >                              Ext: 0  User information layer 1: Unknown
(24)
 > [18 03 a9 83 81]
 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
Exclusive Dchan: 0
 >                        ChanSel: Reserved
 >                       Ext: 1  Coding: 0   Number Specified   Channel Type:
3
 >                       Ext: 1  Channel: 1 ]
 > [28 0f b1 74 65 73 74 20 65 78 74 65 6e 73 69 6f 6e]
 > Display (len=15) Charset: 31 [ test extension ]
 > [6c 05 21 83 32 30 32]
 > Calling Number (len= 7) [ Ext: 0  TON: National Number (2)  NPI: 
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
 >                           Presentation: Presentation allowed of 
network provided number (3) '202' ]
 > [70 08 80 33 38 31 36 30 36 38]
 > Called Number (len=10) [ Ext: 1  TON: Unknown Number Type 
(0)  NPI: Unknown Number Plan (0) '18005551212' ]
     -- Called g0/18005551212
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 03 83 e0 20]
< Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 
0   Location: Transit network (3)
<                  Ext: 1  Cause: Unknown (96), class = Protocol Error (6) ]
<              Cause data 1: 20 (32)
-- Processing IE 8 (cs0, Cause)
     -- Channel 0/1, span 1 got hangup
     -- Channel 0/1, span 1 received AOC-E charging 0 units
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
     -- Hungup 'Zap/1-1'
   == Everyone is busy/congested at this time (1:0/0/1)

Steve Totaro

2006-Apr-30 01:37 UTC

head link

[Asterisk-Users] problame with outbound calls on pri

Are you sure it should be 4ess switchtype?  Have you tried national?  Is 
it only on 1800/toll free numbers?  Pridialplan=unknown, have you tried 
anything different for this value?

I can dial into my T3 just fine but I cannot dial out to toll free or 
911.  Any regular toll call out works, local or longdistance.

There are a couple strange things in your debug:
Called Number (len=10) [ Ext: 1  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0) '18005551212' ]
-- Channel 0/1, span 1 received AOC-E charging 0 units

Thanks,
Steve

Doug Langley wrote:> Hi. recently I have been trying to setup a PRI on asterisk.  Inbound 
> calls are working just fine but I am not able to make outbound calls.  
> Does anyone know  what I need to change to make outbound calls work?  
> Right now the PRI is instantly hanging up on the outbound calls.
> I have included full debug info as well as config files.
>
>
> /etc/zaptel.conf
> span=1,1,1,esf,b8zs
> bchan=1-23
> dchan=24
> loadzone=us
> defaultzone=us
>
> relevant portions of zapata.conf:
> [trunkgroups]
> [channels]
> language=en
> context=from-pstn
> pridialplan=unknown
> signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
> ;signaling=em_w
> switchtype=4ess
> group=0
> channel => 1-23
>
>
> debug info:
>     -- Executing Dial("SIP/202-2d92",
"zap/g0/18005551212") in new stack
> -- Making new call for cr 32771
>     -- Requested transfer capability: 0x00 - SPEECH
> > Protocol Discriminator: Q.931 (8)  len=48
> > Call Ref: len= 2 (reference 3/0x3) (Originator)
> > Message type: SETUP (5)
> > [04 02 80 90]
> > Bearer Capability (len= 4) [ Ext: 1  Q.931 Std: 0  Info transfer 
> capability: Speech (0)
> >                              Ext: 1  Trans mode/rate: 64kbps, 
> circuit-mode (16)
> >                              Ext: 0  User information layer 1: 
> Unknown (24)
> > [18 03 a9 83 81]
> > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
> Exclusive Dchan: 0
> >                        ChanSel: Reserved
> >                       Ext: 1  Coding: 0   Number Specified   Channel 
> Type: 3
> >                       Ext: 1  Channel: 1 ]
> > [28 0f b1 74 65 73 74 20 65 78 74 65 6e 73 69 6f 6e]
> > Display (len=15) Charset: 31 [ test extension ]
> > [6c 05 21 83 32 30 32]
> > Calling Number (len= 7) [ Ext: 0  TON: National Number (2)  NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> >                           Presentation: Presentation allowed of 
> network provided number (3) '202' ]
> > [70 08 80 33 38 31 36 30 36 38]
> > Called Number (len=10) [ Ext: 1  TON: Unknown Number Type (0)  NPI: 
> Unknown Number Plan (0) '18005551212' ]
>     -- Called g0/18005551212
> < Protocol Discriminator: Q.931 (8)  len=10
> < Call Ref: len= 2 (reference 3/0x3) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> < [08 03 83 e0 20]
> < Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
> Location: Transit network (3)
> <                  Ext: 1  Cause: Unknown (96), class = Protocol Error 
> (6) ]
> <              Cause data 1: 20 (32)
> -- Processing IE 8 (cs0, Cause)
>     -- Channel 0/1, span 1 got hangup
>     -- Channel 0/1, span 1 received AOC-E charging 0 units
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>     -- Hungup 'Zap/1-1'
>   == Everyone is busy/congested at this time (1:0/0/1)
>
>

Eric "ManxPower" Wieling

2006-Apr-30 09:07 UTC

head link

[Asterisk-Users] problame with outbound calls on pri

Have you tried switchtype=national ?

Doug Langley wrote:> Hi. recently I have been trying to setup a PRI on asterisk.  Inbound 
> calls are working just fine but I am not able to make outbound calls.  
> Does anyone know  what I need to change to make outbound calls work?  
> Right now the PRI is instantly hanging up on the outbound calls.
> I have included full debug info as well as config files.
> 
> 
> /etc/zaptel.conf
> span=1,1,1,esf,b8zs
> bchan=1-23
> dchan=24
> loadzone=us
> defaultzone=us
> 
> relevant portions of zapata.conf:
> [trunkgroups]
> [channels]
> language=en
> context=from-pstn
> pridialplan=unknown
> signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
> ;signaling=em_w
> switchtype=4ess
> group=0
> channel => 1-23
> 
> 
> debug info:
>     -- Executing Dial("SIP/202-2d92",
"zap/g0/18005551212") in new stack
> -- Making new call for cr 32771
>     -- Requested transfer capability: 0x00 - SPEECH
>  > Protocol Discriminator: Q.931 (8)  len=48
>  > Call Ref: len= 2 (reference 3/0x3) (Originator)
>  > Message type: SETUP (5)
>  > [04 02 80 90]
>  > Bearer Capability (len= 4) [ Ext: 1  Q.931 Std: 0  Info transfer 
> capability: Speech (0)
>  >                              Ext: 1  Trans mode/rate: 64kbps, 
> circuit-mode (16)
>  >                              Ext: 0  User information layer 1: 
> Unknown (24)
>  > [18 03 a9 83 81]
>  > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
> Exclusive Dchan: 0
>  >                        ChanSel: Reserved
>  >                       Ext: 1  Coding: 0   Number Specified   Channel 
> Type: 3
>  >                       Ext: 1  Channel: 1 ]
>  > [28 0f b1 74 65 73 74 20 65 78 74 65 6e 73 69 6f 6e]
>  > Display (len=15) Charset: 31 [ test extension ]
>  > [6c 05 21 83 32 30 32]
>  > Calling Number (len= 7) [ Ext: 0  TON: National Number (2)  NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>  >                           Presentation: Presentation allowed of 
> network provided number (3) '202' ]
>  > [70 08 80 33 38 31 36 30 36 38]
>  > Called Number (len=10) [ Ext: 1  TON: Unknown Number Type (0)  NPI: 
> Unknown Number Plan (0) '18005551212' ]
>     -- Called g0/18005551212
> < Protocol Discriminator: Q.931 (8)  len=10
> < Call Ref: len= 2 (reference 3/0x3) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> < [08 03 83 e0 20]
> < Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
> Location: Transit network (3)
> <                  Ext: 1  Cause: Unknown (96), class = Protocol Error 
> (6) ]
> <              Cause data 1: 20 (32)
> -- Processing IE 8 (cs0, Cause)
>     -- Channel 0/1, span 1 got hangup
>     -- Channel 0/1, span 1 received AOC-E charging 0 units
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>     -- Hungup 'Zap/1-1'
>   == Everyone is busy/congested at this time (1:0/0/1)-- 
Now accepting new clients in Birmingham, Atlanta, Huntsville, 
Chattanooga, and Montgomery.

Apparently Analagous Threads

Search for more possibly parallel threads

asterisk users - Apr 2006 - problame with outbound calls on pri

[Asterisk-Users] problame with outbound calls on pri

[Asterisk-Users] problame with outbound calls on pri

[Asterisk-Users] problame with outbound calls on pri

Apparently Analagous Threads