similar to: ztdummy, zttest

Hello, I have some ugly numbers given by zttest for ztdummy on an AMD64 box running linux-2.6.15 compiled for Athlon64. linux-2.6.15, zaptel/branches/1.2 r900, jiffies ./zttest Opened pseudo zap interface, measuring accuracy... 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Hi, I'm still strugling with getting an easy to use conference system implemented. I did have app_conference running, but today I upgraded asterisk to 1.0.9 and it stopped working. I've tried following the instructions for compiling app_conference on 1.0.7 but it didn't work. So I went back to ztdummy (I've not had any luck getting this to compile on FC2). Anyhoo, I've

What does it take to get ztdummy to work correctly? I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 1.4.9.2 Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. Problem is playback() does not work. So then I stop zaptel, asterisk runs and playback() now works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for that. I am

Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my

Hi I am trying to build reliable fax solution with asterisk, iaxmodem and hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3 1.2GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After installing the newest zaptel and wanpipe-3.1.0 beta I did zttest and it didn't give me good results: 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

Hello, I'm checking some Billing Software for Asterisk. In opensource I only know (the name, I haven't used) AstBill. What other software should I check with similar capabilities? Thank you! -- Carles Pina i Estany GPG id: 0x8CBDAE64 http://pinux.info Manresa - Barcelona

Hi, I am having problem with my Asterisk installation and find out it has to do with ztdummy. if the ztdummy module is loaded, the asterisk playback() command will not play files. DTMF is still properly received. If the ztdummy module is unloaded, sound playback works again. Here is my version zaptel-1.4.9.2 linux-source-2.6.18 asterisk-1.4.18 Can anyone tell me how to fix it? Or should I

Friends, I'm having severe problems with zaptel timers on Intel Dual Core systems with SMP code enabled. Ztdummy, zaptel connected to Digium TDM or PRI cards - all ends up with large timer probems - zttest going down to 50% accuracy on some systems, even to -1 on ztdummy systems and voice quality is no more. A restart is the only way to get back to a working system. We're only

We have recently started making more frequent use of the meetme conference of our * system. We are using v1.0.8 with a 2.6.11 kernel on our system. We generally have 4 callers in it: two with the gsm codec and 2 with g729. Initially, the conference works fine and there is little latency. After about 15min., though, the latency is very noticable and by 25min it's unbearable. If we all leave

I previously had Asterisk 1.0.7 running on a Linux 2.4.x kernel with ztdummy. I was able to do things like meetme and music on hold. I recently installed Asterisk 1.0.9 on a different machine with a Linux 2.6.x kernel running ztdummy. I installed and configured everything the same way, but when I try to call into a conference room I get the error message stating, "that is not a valid

Hi, I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports, I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings, Thanks for any info. Marco.

I'm running asterisk/zaptel 1.4.5. If I load the ztdummy module, the dialplan hangs when it tries to play audio (i.e. Playback) -- and I just hear static on the line. I'm running this on a debian system. I actually have it working on a different debian system but have yet to discover the important difference between the two installations. Any advice on where to look? Thanks John

Hi, I have a TDM400P running with only one FXO port running on a VIA EPIA MS10000 (1Ghz Via Eden). When I run zttest from Zaptel 1.2.1 it hang and when I interrupt it with Ctrl-C that is the result: ?anyone have some idea about why isn't working? Some additional info: # /usr/src/zaptel/zttest -v Opened pseudo zap interface, measuring accuracy... --- Results after 0 passes --- Best:

Hi I run asterisk 1.4.2 with zaptel 1.4.1. Zaptel is only needed for the ztdummy driver to get the Meetme() application to work. I don't have any specific hardware. And it does work nicely. When I reboot the machine however I have to manually load the driver like this: [root@vink ~]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device

I am trying to test the call parking, but It doesn't fonction :(these are my config files.extensions.conf:include=>parkedcallsexten => 4000,1,Dial(SIP/4000,60,tT)exten => 4001,1,Dial(SIP/4001,60,tT)exten => 4002,1,Dial(SIP/4002,60,tT)In features.conf:[general]parkext => 700 parkpos => 701-720 context => parkedcalls [featuremap]blindxfer => # disconnect => *0

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

I've made some modifications to zttest in order to use it as a frame clock accuracy tester / slip detector. I'm not certain if that was it's original purpose, but it seems that a lot of folks try to use it that way. The result is something that I'm calling ztclock for now to help avoid confusion. I'm including the source at the end of this post. You can compile it by placing

Hi All, I am new to both Asterisk and PBX stuff. I have 3 Tohiba PBXs in 3 separate offices as follows, Toshiba Strata dk28 Toshiba Strata dk280 Toshiba Strata dk8 I need to install 3 Asterisk servers in these 3 locations and integrate them with each of the Toshiba PBX s. This is to give IP Phones/soft phones to the users and to route these VOIP calls through the PBX to POTS. What are the