Looks like you don't have kernel development installed and a basic kernel
build config file generated.
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 8:55 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] ztdummy compile again
Hi,
I'm still strugling with getting an easy to use conference system
implemented. I did have app_conference running, but today I upgraded
asterisk to 1.0.9 and it stopped working. I've tried following the
instructions for compiling app_conference on 1.0.7 but it didn't work.
So I went back to ztdummy (I've not had any luck getting this to compile
on FC2).
Anyhoo, I've tried again and once again ztdummy fails to compile and the
various disparate instructions on what is needed to get it running are
not helping.
If I run make linux26 then the zaptel drivers start to compile but then
spews out a load of errors.
Anyone have any ideas?
============SNIP==========
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c
cc -o gendigits gendigits.o -lm
./gendigits
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw
./makefw tormenta2.rbt tor2fw > tor2fw.h
Loaded 69900 bytes from file
./makefw pciradio.rbt radfw > radfw.h
Loaded 42096 bytes from file
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o
zonedata.lo
zonedata.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o
tonezone.lo
tonezone.c
ar rcs libtonezone.a zonedata.lo tonezone.lo
cc -o ztcfg ztcfg.o libtonezone.a -lm
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c
cc -o torisatool torisatool.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c
cc -o ztmonitor ztmonitor.o
cc -o ztspeed.o -c ztspeed.c
cc -o ztspeed ztspeed.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c
cc -o zttool zttool.o -lnewt
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" zttest.c -o zttest
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c
cc -o fxotune fxotune.o -lm
/lib/modules/2.6.5-1.358/build
make -C /lib/modules/2.6.5-1.358/build SUBDIRS=/usr/src/zaptel modules
make[1]: Entering directory `/usr/src/linux-2.6.5-1.358'
Makefile:434: .config: No such file or directory
CC [M] /usr/src/zaptel/zaptel.o
In file included from /usr/src/zaptel/zconfig.h:9,
from /usr/src/zaptel/zaptel.c:40:
include/linux/config.h:4:28: linux/autoconf.h: No such file or directory
In file included from /usr/src/zaptel/zaptel.c:40:
/usr/src/zaptel/zconfig.h:10:27: linux/version.h: No such file or directory
/usr/src/zaptel/zconfig.h:68:41: missing binary operator before token
"("
In file included from include/linux/kernel.h:11,
from /usr/src/zaptel/zaptel.c:42:
include/linux/linkage.h:5:25: asm/linkage.h: No such file or directory
In file included from include/linux/types.h:13,
from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/posix_types.h:47:29: asm/posix_types.h: No such file or
directory
In file included from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/types.h:14:23: asm/types.h: No such file or directory
In file included from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/types.h:18: error: syntax error before "__kernel_dev_t"
include/linux/types.h:18: warning: type defaults to `int' in declaration
of `__kernel_dev_t'
include/linux/types.h:18: warning: data definition has no type or
storage class
include/linux/types.h:21: error: syntax error before "dev_t"
include/linux/types.h:21: warning: type defaults to `int' in declaration
of `dev_t'
include/linux/types.h:21: warning: data definition has no type or
storage class
include/linux/types.h:22: error: syntax error before "ino_t"
include/linux/types.h:22: warning: type defaults to `int' in declaration
of `ino_t'
include/linux/types.h:22: warning: data definition has no type or
storage class
include/linux/types.h:23: error: syntax error before "mode_t"
include/linux/types.h:23: warning: type defaults to `int' in declaration
of `mode_t'
include/linux/types.h:23: warning: data definition has no type or
storage class
include/linux/types.h:24: error: syntax error before "nlink_t"
include/linux/types.h:24: warning: type defaults to `int' in declaration
of `nlink_t'
include/linux/types.h:24: warning: data definition has no type or
storage class
include/linux/types.h:25: error: syntax error before "off_t"
include/linux/types.h:25: warning: type defaults to `int' in declaration
of `off_t'
include/linux/types.h:25: warning: data definition has no type or
storage class
include/linux/types.h:26: error: syntax error before "pid_t"
include/linux/types.h:26: warning: type defaults to `int' in declaration
of `pid_t'
include/linux/types.h:26: warning: data definition has no type or
storage class
================
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2930 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20050923/2b42ed1c/smime.bin