similar to: G.729 transcoder beetween asterisk to avaya

When I use vif-route and network-route in the xen-unstable latest release, the script vif-route is executes when I create a new VM , isn''t it? Well the row that begin with ''ip r ...'' that enable routing in Dom0 is not execute by my system when I use ''xm create -c ...''. Are there errors in the script? If I invoke it directly, nothing happens. Excuse me

I want to use one scsi disk with two redondant servers, mounted r/w on server A and r/o on server B. Everything works, except that when I write data from server A, I can't read it on server B before un-mounting the disk ant re-mounting it... (with AND without soft-updates) Is there any way to mount a disk r/o keeping in sync with real disk data ? Thank you. -- Geoffroy DESVERNAY

Dear all I have asterisk setup now what happend when i dial 4 digit number my asterisk wait for few digit why when i press # key it is dialing fast but without # wait for few number is there any configuration for dialplan I have setup asterisk with avaya system i have 5 avaya system on 5 location i use 16XX,22XX,33XX,44XX,20XX to reach avaya extentions but when

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Hi Guys, I am not so familiar with asterisk and hope to get help here. I am having now some stupid errors. My goal for the first, is to create a simple pbx with different context. As long as I use only the contex 'default' everything seems to work perfect. Now I tried to add another context i.e 'internal' and the asterisk is complaining for not finding the required extension in

Hi everybody, Well, I've finally got asterisk to to talk nicely with my Intertel pbx. Currently there is a outside T1 line (e&m wink start, esf, b8zs) connected to asterisk, and then asterisk connected similarly to my Intertel pbx. For right now all asterisk is doing is passing calls between the two. When I call out from the pbx, I can connect perfectly to the outside world. When I

I am trying to set up a Grandstream GXV-3000 Video phone to Asterisk ver 1.2.21.1. The problem I'm having is that it can call other SIP phones, but not vice versa. Can someone tell me where is the problem? TIA! Here's part of my configurations: ---------- sip.conf ---------- ; 113 is the Grandstream phone [113] type=friend username=113 secret=secret context=default dtmfmode = rfc2833

Hi list, We're trying to set up a phone number that customers can call to get a hold of anyone of a group of sysadmins (and not their voice mails!). We found the findme example ([1]) that makes the callees press 1 to accept the call. It almost works, but it doesn't work correctly when one of the callees, the sysadmins, hangs up after accepting the call. We're using this

Hi, I need to configure BRI 4span card in dubai in vicidialnow for dialer perpose. in that i have small confusion which is NT an TE mode . that was i am setting perfectly but dubai telco what they are use for this i dont know which parameters are use for that . please help me. -- Best Regards, Mahesh Katta *BUZZ**WORKS* Business Services Private Limited BANGALORE | CHENNAI | HYDERABAD |

I have this in sip.conf: [general] context=default allowoverlap=no bindport=5060 bindaddr=0.0.0.0 srvlookup=yes progressinband=yes [19256002182] type=friend username=19256002182 callerid="Test hone 1" <+19256002182> host=dynamic canreinvite=no secret=password context=test disallow=all allow=g729 [level3] type=peer host=xxx.yyy.16.99 context=default

I have repackaged the client support functionality in samba to support applications requiring access to smb servers. It is a shared library built using automake & libtool. It builds samba's smbclient utility linked against the shared library for test. The perpose is to use in gnome virtual filesystem. It is currently used statically linked into midnight commander when configure'd

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

Hiya, I sent this bugfix to the asterisk-dev mailing list, and modified it as I noticed side effects, but now it appears to be finished. Nobody seemed to notice it there, so I thought I'd post here, as it seems to be something that will be needed as people update to the latest CVS version. So...read on :) Ted programmer_ted@hotmail.com P.S. Read to the very end. The original bugfix

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

I have Asterisk running with a combination of SIP and H323 clients. I am using the OH323 module instead of the H323 one. When the SIP clients ring each other, they can hear a ringing noise in the ear peice to let them know that the other parties phone is ringing. However, when the H323 client rings a SIP client, there is no ringing sound at all, although as soon as the called party picks up the

Hi List, I receive to above message in my logfile when I try to add a printer. My addprinter.sh script contains this and has root:root, 0755 rights echo "Add: $1 $2 $3 $4 $5" >> /tmp/addprinter (just for debugging perpose..., it's never been called at all) The important part of [global] contains: load priners = yes printing = lprng printer admin = ries, @ntadmin show add

Hi, I run into a problem and I'm not shure what do I misconfigure. I've a B410P ISDN card with bri_cpe signalling and two Openvox (A1200, A800) cards with fxo_ks signalling, all with dahdi drivers. I can receive fax from a public number, but I can't send fax. The CLI says it picks up the line but no dialing. I tried the extension with an analog phone, it works fine, I can dial

Hello everyone, I've just upgraded from 1.6.1.9 to 1.6.2.13. I have noticed that (after the upgrade) abandoned calls within the Queue produce no cdr at all. I am using unanswered = no (the default) in cdr.conf. The call shows, as expected, in the queue_log as ABANDON The dialplan is: Ringing(); Answer(); // need to answer or no music! goto

Hello all, I have been posting some questions about this problems that I cannot yet solve, but I think I have a better diagostic, so maybe someone can give me a clue why it is happenning. I have Asterisk + AMP configured as a PBX with a Customer Center Queue with 4 agents that login/logout dinamically. If there are no agents, queue timesout and gets derived to another queue that somebody