asterisk users - Apr 2011 - BRI detection

Hi,

I need to configure BRI 4span card in dubai in vicidialnow for dialer
perpose. in that i have small confusion which is NT an TE mode . that was i
am setting perfectly but dubai telco what they are use for this i dont know
which parameters are use for that . please help me.


-- 
Best Regards,

Mahesh Katta
*BUZZ**WORKS* Business Services Private Limited
BANGALORE | CHENNAI | HYDERABAD | MUMBAI| DELHI
303, Gagangiri Apts, Parleshwar Road, Ville Parle East, Mumbai - 400057.
GSM +91.97029.70779 | Phone +91.22.2663.1811 | Fax +91.22.2663.1811
Web http://www.buzzworks.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20110401/7411e2f3/attachment.htm>

On Fri, Apr 01, 2011 at 06:06:45PM +0530, mahesh katta
wrote:
> Hi,
> 
> I need to configure BRI 4span card in dubai in vicidialnow for dialer
> perpose. in that i have small confusion which is NT an TE mode . that was i
> am setting perfectly but dubai telco what they are use for this i dont know
> which parameters are use for that . please help me.
TE (or CPE) is "phone". If you you just connect your adapter to a
telco,
this is what you need.

What card is it? What BRI channel driver?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir

NT = Network Termination/Topology (or something like that) - used when
you want to be the network end.
TE = Terminating Equipemt - used when you want to be the consumer end (a
PBX or ISDN handset usually).

You probably want to be the TE - as you are running Asterisk PBX ;)





-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of mahesh
katta
Sent: 01 April 2011 13:37
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] BRI detection


Hi,

I need to configure BRI 4span card in dubai in vicidialnow for dialer
perpose. in that i have small confusion which is NT an TE mode . that
was i am setting perfectly but dubai telco what they are use for this i
dont know which parameters are use for that . please help me.


-- 
Best Regards, 

Mahesh Katta
BUZZWORKS Business Services Private Limited
BANGALORE | CHENNAI | HYDERABAD | MUMBAI| DELHI
303, Gagangiri Apts, Parleshwar Road, Ville Parle East, Mumbai - 400057.
GSM +91.97029.70779 | Phone +91.22.2663.1811 | Fax +91.22.2663.1811 
Web http://www.buzzworks.com


 If you have received this communication in error we would appreciate
you advising us either by telephone or return of e-mail. The contents
of this message, and any attachments, are the property of DataVox,
and are intended for the confidential use of the named recipient only.
If you are not the intended recipient, employee or agent responsible
for delivery of this message to the intended recipient, take note that
any dissemination, distribution or copying of this communication and
its attachments is strictly prohibited, and may be subject to civil or
criminal action for which you may be liable.
Every effort has been made to ensure that this e-mail or any attachments
are free from viruses. While the company has taken every reasonable
precaution to minimise this risk, neither company, nor the sender can
accept liability for any damage which you sustain as a result of viruses.
It is recommended that you should carry out your own virus checks
before opening any attachments. 

Registered in England. No. 27459085.