similar to: Echoes & Asterisk connects too early

Hello, I have read the articles on echo cancellation (http://www.voip-info.org/wiki/view/Asterisk), but couldn't find a solution to my problem. We are running Asterisk 1.4.12 together with an EICON DIVA SERVER BRI-2M PCI (current driver from EICON) and some SNOM 300/360. There are few clients where we recognize echoes on both sides when we call them via ISDN. With some of these clients we

Hi all, I've finally taken the plunge and had isdn installed. It's a BRI from Telewest in the UK. I'm told by the provider that it's in point to multipoint mode with 6 digit presentation. I'm using an AVM fritz (bt speedway) with the fcpci-suse9.1-3.11-02 driver. Chan_capi seems to be installed fine. I can receive incoming calls. However, I can't call out. When ever i

My IAX2 trunk provider, Teliax, seems to be forcing early media. Early media is cool and all, but my Asterisk install doesn't seem to be fully supporting it. My initial setting was using Dial() to call all of my dahdi (TDM400P) extensions. The results were that incoming calls would not hear any ringing tones and the call would be ended by Teliax after 21 seconds. Looking at the packet dumps,

Hi, >However, I believe that zaptel >= 1.4.6 or zaptel 1.2 >= 1.2.21 should >support hires timers for timing on kernel >= 2.6.22 . > >What version of Zaptel do you use? > I was using version 1.4.5.1 I just downloaded and installed version 1.4.7, configure/make/make install finished without an error, but when is used modprobe ztdummy the system said: FATAL: Error

We are experiencing slightly distorted audio with playing of recordings on our Asterisk server when the call comes in over our Eicon Diva Server BRI card. An example is an incoming call to IVR and playing some of the standard Asterisk voice prompts. Note that there is no audio problem with internal access to the same recording. Neither is there a problem with calls not involving the playing of

Hi all, I've released another free app for the iPhone and iPod touch - this one lets you read the Daily Asterisk News. Hope you enjoy it :D http://www.venturevoip.com/news.php?rssid=2371 -- Cheers, Matt Riddell Managing Director _______________________________________________ http://www.venturevoip.com/news.php (Daily Asterisk News) http://www.venturevoip.com/exchange.php (Full ITSP

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Has anyone ever seen an Snom320 lose settings? It's been working fine for months and then I got a call this morning saying that it was asking for country, timezone etc. I logged in remotely, and it had lost the server address, username, password, mailbox and ringtone. - -- Kind Regards, Matt Riddell Director

Dear list, I am looking for an open source SIP client(or any SDK) that can work on a browser. It may be based html5, javascript, flash, adobe air. I have done some research myself and I would like to ask the community if they have any further hints for me. Real life experience would be awesome. Thanks, Regards, Arstan Jusupov -------------- next part -------------- An HTML attachment was

Hi anyone know where i can find all internatinal numbering plan in csv and for free or small price ? thanks Jpc

Hi, I have these extensions: exten => 101,1,Dial(SIP/101,15) exten => 102,1,Dial(SIP/102,15) exten => 0,1,Dial(SIP/101&SIP/102,15,r) They work fine and I get the ringing sound if I dial them directly. However, I also have this extension: exten => s,1,Answer() exten => s,2,Background(viagenie) exten => s,3,WaitExten() The ringing sound doesn't work for any extension

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Has anyone done any integration with this? All I know so far is that it appears to use some non standard form of SIP. Any pointers? - -- Kind Regards, Matt Riddell Director _______________________________________________ http://www.venturevoip.com (Great new VoIP end to end solution) http://www.venturevoip.com/news.php (Daily Asterisk News -

Hi All, I am trying to use the AMD (Answering Machine Detect). But it is not sending the AMD_Status as either the Human or Machine, it hangs up in middle. can any one suggest us, what might be the problem and possible solution to it. below is the log -- Executing AMD("SIP/sip-ffe0", "") in new stack -- AMD: SIP/sip-ffe0 14082284927 (null) (Fmt: 4) Apr 23 08:00:26

G'day all, I'm using Asterisk 1.4 and am trying to work out a way to bring people into a conference call. In the ideal scenario two people would be talking and one of them would push some keys, then a phone number and then the three of them would be in a conference. From there they should be able to bring in other people as well. This seems to be what the Asterisk n-way call HOWTO

How to make outgoing calls from DID and what is theway to get incoming calls from DID. -- ----- Thanks and regards Virendra Bhati +91-9172341457 Asterisk Engineer -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110526/3f19091d/attachment.htm>

Ah, no, you misunderstand. Asterisk wouldn't care one little bit what is on the page - Chromevox would do all that. A screenreader usually tabs or arrows their way about, selecting headings to read content. Thus, Asterisk ONLY needs to be able to hear content FROM the browser and pipe it to the channel, and pass keypresses back TO the browser. The human is the parser, if that makes sense?

Hi, I was looking round on the Internet and saw there was no definitive list of free applications available for use with Asterisk, so I thought I'd compile a list for you all. If there's anything that you know of that is actively maintained but not in the list below, let me know (bear in mind I'm not including distros or Asterisk packagings in this list). Hopefully there are a few

>>I'm not sure that your question is clear. You'll probably want to be more specific. >> What is pulse? You mention "as a user", are you talking about voicepulse.com ? >> What are you trying to do with pulse? >> What problem are you running into? Sorry Rusty... I am trying to get Asterisk 11 to co-exist with a centos 7 box that has pulse audio running as

Hi all, I've uploaded a free app for the iPhone called AsteriskRef to the Apple AppStore. This allows you to lookup applications and functions using your iPhone or iPod touch so you don't have to jump out of extensions.conf or open another terminal tab. It currently supports applications and functions from Asterisk 1.4, but I'm adding 1.6 and trunk at the moment. It currently

>Soumya Kat wrote: > What I would like to know is how to get information such as SIP users, > number of SIP connections and traffic associated with those from asterisk > using a C Code. >Russell Bryant > There is actually no good way to do this inside of Asterisk right now. It's > certainly all possible ... it's just software ... but there is no > straightforward

We just completed a new implementation of voicemail for Asterisk. It's much cleaner than Comedian mail and can emulate several voicemail user interfaces, including Audix. It's a great replacement for Audix. All of the sounds/prompts are presently being re-recorded by a professional female voice. If you are interest in the app, let us know at nt_jnewman at yahoo.com. Justin