similar to: PRI Reset

Dear all, Just wanted to know if any one had deployed the Grandstream GXW 4024 yet. Wanted to hear any feedback and/or problems with this unit that you may have experienced. Thank you. -- Faraz R Khan Chief Architect Emergen Consulting Pvt Ltd www.emergen.biz

How do you guys like the 330 and 320? I've been looking at this as my "standard" phone, since it's relatively cheaper than the 501 which is the phone I currently push with my PBX systems. Most of my customers do not use more than one line per phone, so having 3 lines on the 501 is not necessarily useful. Also, I read that the phone offers TLS security. What does that mean?

Hello all, We have an Asterisk server that has worked without issue for a while. Before, only Sipura and Polycom 500 series phones were used. Recently, we've added a few POE switches and 20 or so Polycom 330's. The 330's seem to lock up often. One easy way to do this is by hitting the * key. I looked thru the XML files for dialplan and what not, nothing stood out.

All, Has anyone experienced a problem with the Polycom 650 phone freezing when you try to do a transfer? I am running asterisk 1.2.20.1 with Polycom SIP version 2.1.1.0052 and boot rom version 3.2.3.0002. I have Polycom 501 phones that work perfectly with the same software versions. The 650 phone; when I hit transfer the caller is placed on hold and the phone is still operational. As

Hello, At one of our locations, we have started to see Polycom 501s (running 1.6.7 firmware) randomly reboot. We have taken packet traces of the phones to determine if there is something odd in the Layer 2 or 3 of the network that might cause it, and have not seen anything strange. There are no errors on the ports. This appears to be affecting POE powered as well as AC powered phones. The Polycom

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco, Span 2 sends to my existing phone system(Nortel). My Span1 gets sent to the context from-pri, detailed here: [from-pri] exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)}) exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk) exten => _49XX,3,Congestion() exten => _49XX,4,Set(CALLERID(all)="") exten =>

I just installed the new version of SJPhone and it appears that it cannot work with * anymore? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040111/25c910bb/attachment.htm

Just FYI: IP address 89.248.168.176 has been trying to use the recently release SIP vulnerability in Asterisk to make outbound calls via our box. They are running a bank account callback scam. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Helpdesk: 817-310-4999 x3 Fax: 817-310-4990 Email: jmann at txhmg.com

I'm getting the following error over and over on the console: pbx_dundi.c:2975 dundi_rexmit: Max retries exceeded to host Any idea how to troubleshoot this? My network latency is roughly 40-50ms between all hosts in my dundi cloud. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at txhmg.com

Folks, I've been following recent discussions regarding echo and echo training with much interest, since it's a problem we've never been able to eliminate here. We're facing two challenges presently, and they may be related (or not): a) Cisco 7960s in the office here echo back to our staff, but the customer hears decent sound. b) We've yet to be able to pass faxes through

Is there a way to recognize if someone called our PRI using an 800 number? The DID is showing my 4 digit primary line, not anything obvious signifying that an 800 number is called? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the

T.38 is often put forward as the solution for reliable FAX over VOIP. Just wondering for anyone using T.38 (with any equipment), how well does it work as compared to a FAX PSTN call? Thanks. Jim James H. Thompson jht@lj.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041129/3ea08b2c/attachment.htm

asterisk*CLI> show channels Channel Location State Application(Data) Zap/3-1 (None) Up Bridged Call(Zap/47-1) Zap/47-1 8178062105 at from-nort Up Dial(ZAP/g1/2105||TWK) Zap/25-1 (None) Up Bridged Call(Zap/1-1) Zap/1-1 4999 at from-pri:2 Up Dial(Zap/g2/4999||twk)

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Folks, First of all, this email is sent to -users and -biz, but please follow- up to the -biz list only. I have set the reply-to, but I fear mailman will strip it off ... Please don't flame me for posting to -users, I'm just not sure who lives on -biz as the (signal/noise | net.kook | troll) factor has been pretty bad on that list lately (poor Rehan!!) ;-) Telephony Depot

Hello, I have spandsp setup to accept incoming faxes and receiving tif files via Email. Using tiff2pdf, or tiff2ps -a2 or even tiffsplit, the last page of the fax is cut off and the quality of the text looks "squished". I "figure" it's a tiff parsing thing, as opposed to a problem with my spandsp installation (heh). Has anyone experienced the same thing, or can

Anyone know if Rhino is planning on supporting zaptel 1.4 anytime soon? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further