asterisk users - Aug 2007 - PRI Question

I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco, Span 2
sends to my existing phone system(Nortel).

My Span1 gets sent to the context from-pri, detailed here:

[from-pri]
exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)})
exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk)
exten => _49XX,3,Congestion()
exten => _49XX,4,Set(CALLERID(all)="")
exten => _49XX,5,Hangup()
exten => _49XX,103,Congestion()
exten => _49XX,104,Set(CALLERID(all)="")
exten => _49XX,105,Hangup()

exten => h,1,Set(CALLERID(all)="")
exten => h,2,Hangup()

I'm receiving caller ID fine, and setting it on the outgoing channel the
same I received it, is my logic above wrong?  Will Asterisk natively pass
through the caller ID, or is there a better way to set it?

The reason I ask, is that calls that are not coming in with CLID(blocked or
private) are showing up as the same number that was previously answered on that
channel.

Thanks.

Using Asterisk 1.4 FYI.



________________________________
This e-mail, facsimile, or letter and any files or attachments transmitted with
it contains information that is confidential and privileged. This information is
intended only for the use of the individual(s) and entity(ies) to whom it is
addressed. If you are the intended recipient, further disclosures are prohibited
without proper authorization. If you are not the intended recipient, any
disclosure, copying, printing, or use of this information is strictly prohibited
and possibly a violation of federal or state law and regulations. If you have
received this information in error, please notify Texas Health Management Group
immediately at 1-817-310-4999. Texas Health Management Group, its subsidiaries,
and affiliates hereby claim all applicable privileges related to this
information.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070809/2691e8c8/attachment.htm

hmm from what i have seen this is not supposed to be.. the info is still
there but should not be used in case of privacy..

zap show channels always show last info till a span refresh.. but the
privacy should indeed replace those with Privacy.

Maybe it could be a bug ,

On 8/9/07, Jeremy Mann <jmann at txhmg.com> wrote:
>
>  I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco,
> Span 2 sends to my existing phone system(Nortel).
>
>
>
> My Span1 gets sent to the context from-pri, detailed here:
>
>
>
> [from-pri]
>
> exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)})
>
> exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk)
>
> exten => _49XX,3,Congestion()
>
> exten => _49XX,4,Set(CALLERID(all)="")
>
> exten => _49XX,5,Hangup()
>
> exten => _49XX,103,Congestion()
>
> exten => _49XX,104,Set(CALLERID(all)="")
>
> exten => _49XX,105,Hangup()
>
>
>
> exten => h,1,Set(CALLERID(all)="")
>
> exten => h,2,Hangup()
>
>
>
> I'm receiving caller ID fine, and setting it on the outgoing channel
the
> same I received it, is my logic above wrong?  Will Asterisk natively pass
> through the caller ID, or is there a better way to set it?
>
>
>
> The reason I ask, is that calls that are not coming in with CLID(blocked
> or private) are showing up as the same number that was previously answered
> on that channel.
>
>
>
> Thanks.
>
>
>
> Using Asterisk 1.4 FYI.
>
>
>
>
>
> ------------------------------
> This e-mail, facsimile, or letter and any files or attachments transmitted
> with it contains information that is confidential and privileged. This
> information is intended only for the use of the individual(s) and
> entity(ies) to whom it is addressed. If you are the intended recipient,
> further disclosures are prohibited without proper authorization. If you are
> not the intended recipient, any disclosure, copying, printing, or use of
> this information is strictly prohibited and possibly a violation of federal
> or state law and regulations. If you have received this information in
> error, please notify Texas Health Management Group immediately at
> 1-817-310-4999. Texas Health Management Group, its subsidiaries, and
> affiliates hereby claim all applicable privileges related to this
> information.
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>,
and is
> believed to be clean.
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Mike
Sales Manager
http://www.voicemeup.com
Making it happen
1.877.807.VOIP (8647)
1.514.312.7030
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070809/3dff2ee8/attachment.htm