similar to: Questions about SPA3102.

Hello, I intend to buy a FXO/FXS device from Linksys. I'm thinking about SPA3102. What you guys think about it. Is ok, is working with asterisk, can i use it like voip peer. Thank you for your advice. Jonson. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070117/93bc7fdb/attachment.htm

Hello, i have a SPA3102 and asterisk v. 1.2.18. I also hev a mysql database with cdr. Well all I want is to receive incoming calls from pstn on specified sip account (suppose 8000), and to initiate outgoing calls from all my asterisk sip accounts through SPA3102 device. Someone can explain me what may i set on SPA and asterisk to do this thing. Thank you for your support. -------------- next part

(Im' answering cc the list, so the knowledge keeps there, and maybe some more qualified answers become). Am Mittwoch, den 15.10.2008, 18:00 -0700 schrieb Francisco del rosario: > Hey Rodolfo... Need some help from you ... > I need to know what hardware do I need to make SIP calls if I set-up > asterisk > So the situation is that I have a PC and configure the software of my PC to

Hi All, In our small office calls to the PSTN are currently sent via Asterisk and a Linksys SPA3102 (1 x FXO and 1 x FXS): SIP Phone --> Asterisk --> Linksys SPA3102 --> PSTN If the PSTN is in use on SPA3102 I need a way to get the call to then route out over IAX termination. SIP Phone --> Asterisk--> Linksys SPA3102 --> PSTN (In Use)

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

Hi everyone, I'm trying to set up a VOIP mass deployment. To do so, I want to generate a configuration xml fails. I read somewhere that I had to use : http://<phone -or- device ip address>/admin/spacfg.xml but it work with an upper firmware only. My Software Version is 3.3.6(GW) The last firmware versin is 5.1.10(GW) Upgrade Enable: is set to yes on the linksys SPA3102 web interface

On Mon, Jun 15, 2015 at 04:56:31PM +1000, Tim Groeneveld wrote: > > ---- On Mon, 15 Jun 2015 16:46:13 +1000 [Lucio] wrote ---- > >Hello all, > > > >I'm new here and I'm interested in building a small PBX with asterisk at > >home. I have one single PSTN line and ethernet cabling in place. I > >already have fairly decent PC that I can use (AMD FX

Okay, i'll move my discuss to asterisk-users. Thank you. On 1/17/07, Tzafrir Cohen <tzafrir.cohen@xorcom.com> wrote: > > > On Wed, Jan 17, 2007 at 04:39:03PM +0800, ??? wrote: > > Jonson Player wrote: > > > Hello, I intend to buy a FXO/FXS device from Linksys. > > > I'm thinking about SPA3102. What you guys thik about it. > > > Is ok, is

Hy all, Recently a have a little problem with a Cisco device, SPA3102. I use this device with asterisk to dial out with outbound trunk. (SPA3102 has 1 FXO port) It working ok , but the device SPA3102 do this : when a call is placed for outgoing in asterisk and send to SPA3102 , this device "answer and dial the number in the same time" , in my CLI I see the channel is open , but on

you think ? > > ** Login/Logout of queues, Day/Night mode buttons with indication (1.6 > has this as well). > ** Company internal directory on the phone updated on the PBX Some (most ?) IP phones support this > > ** System Speed Dial on the display updated by the PBX This one is interesting. I can't see a way to do it. Ant idea ? > > ** Call Fwd by PBX with LED

Hello list, this is my first post on this list. I have a server with Asterisk and a Linksys SPA3102 with 3 SIP phones. I have configured the SPA PSTN line as trunk to receive and send calls. I can call outside from SIP phone throw the PSTN line and all is OK, the problem is when I receive a call from the PSTN, on the out caller phone there is a demo playback. I want to redirect the call to a

Hi, I'm connecting a Linksys SPA3102 to 3 different PSTN analog lines. With only one of those, CID is shown. Beside that, everything is working OK. Lines have different providers and/or locations. All are located in France and CID Detection Method is ETSI FSK / Bell 202. If I'm connecting a TDM400-enabled Asterisk system, to one of those 2 non-working lines : it does work. The only

Hello, I have a strange situation with an SPA3102 FXO/FXS device. I'm in situation that when i receive a call from PBX line I must forward the calls to 2 VoIP numbers. Right now i have the following settings: (S0<:1010 at GW1>). I want to forward at 1020 too. I tested (S0<:1010|1020 at GW1>) and doesn't work. Did you have any other ideea? Thank you.

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

Hello, I just buyed a SPA3102 from Linksys. Can anyone help me or guide me to configure voice part on it. I cannot get it if I can use like peer for my asterisk. Please help me with some tips. Thank you guys. Regards, Jonson. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070126/a49e3bdb/attachment.htm

Hi, I have been considering a purchase of the linksys spa3102 for a couple hours but I would like to know from someone here, wether this device will support faxing on my local asterisk server, I have had success sending and recieving faces with an x100p, and recall that in the old documentation, they mention that if I send/recieve faxes, that it all should be done on the local server for best

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

I'm looking to build a VoIP solution for 100+ service vehicles that have WiFi hot spots installed (with cellular uplinks). Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC

Hi Scott, thanks for the answer, can share some link or documentation about how setup this in SPA3102? I try to get something about this using google, but found comments but nothing useful. Alejandro 2015-04-15 19:28 GMT-03:00 Scott Griepentrog <sgriepentrog at digium.com>: > The Cisco/Linksys SPA devices are also able to be provisioned > automatically. > > On Wed, Apr 15,

Sorry, I am resending this, I tried earlier, but I couldn't see it appear on the archives - apologogies if it appears double! -------------------------------------------------- My Sipura 3000 ATA died on me this morning. I had a Linksys SPA 3102 available which I would like to use as a replacement. Unfortunately, the SPA3102 is not able to register with the asterisk server - I am