Hi everyone,
I'm trying to set up a VOIP mass deployment.
To do so, I want to generate a configuration xml fails.
I read somewhere that I had to use : http://<phone -or- device ip
address>/admin/spacfg.xml
but it work with an upper firmware only.
My Software Version is 3.3.6(GW)
The last firmware versin is 5.1.10(GW)
Upgrade Enable: is set to yes on the linksys SPA3102 web interface
TFTP works because I tried to download and upload to the TFTP server and
it worked fine
I tried to upgrade firmware via tftp using this command :
http://192.168.0.1/upgrade?tftp://192.168.0.2/spa.bin
but upgrade fails :s
syslog :
Mar 1 10:17:04 georghy-desktop kernel: [ 878.063638] 0000:03:00.0: eth3:
Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Mar 1 10:17:04 georghy-desktop kernel: [ 878.063645] 0000:03:00.0: eth3:
10/100 speed: disabling TSO
Mar 1 10:17:33 192.168.0.1 SPA-3102 00:0e:08:ce:be:4e ? Requesting
upgrade tftp://192.168.0.2:69/spa.bin
Mar 1 10:17:38 192.168.0.1 SPA-3102 00:0e:08:ce:be:4e ? Upgrade failed:
tftp_get failed
Mar 1 10:17:38 georghy-desktop kernel: [ 913.473031] 0000:03:00.0: eth3:
Link is Down
Mar 1 10:17:43 192.168.0.1 ** postupgrade handling (0)
what should I do ?
--
Cordialement, / Greetings,
Georghy FUSCO
