Hi!
I don't understand what you mean by : ?configure voice part on it",
but I
can give general guidelines:
First you setup SPA3000 web UI:
1) Line1 Tab:
Sip settings:
SIP port : 5060
Proxy and Registration:
Proxy: Asterisk IP
Subscriber Information:
Display Name: FXS_username
Password: FXS password
User ID: FXS_username
2) PSTN Line Tab:
SIP Settings:
SIP port: 5061
Proxy and Registration:
Proxy: Asterisk IP
Subscriber Information:
Display Name: FXO_username
Password: FXO_password
User ID: FXO_username
Dial Plans:
Dial Plan 1: (<S0:s@Asterisk IP:5060>) (may be any other dial plan)
VoIP-To-PSTN Gateway Setup:
VoIP-To-PSTN Gateway Enable: Yes
Line 1 VoIP Caller DP: 1 (or any other setup like Dial Plan 1)
VoIP Users and Passwords (HTTP Authentication)
VoIP User 1 Auth ID: asterisk
VoIP User 1 DP: 1 (same as above)
PSTN-To-VoIP Gateway Setup:
PSTN-To-VoIP Gateway Enable: Yes
Then Asterisk sip.conf:
[ FXO_username]
disallow=all
allow=alaw
type=friend
fromuser= FXO_username
username= FXO_username
secret= FXO_password
host=dynamic
dtmfmode=rfc2833
canreinvite=no
qualify=1000
context=incoming
port=5061
[FXS_username]
disallow=all
allow=alaw
type=friend
username= FXS_username
secret= FXS_password
host=dynamic
dtmfmode=rfc2833
canreinvite=no
qualify=1000
context=outgoing
Best regards
Mihaela MJ
On 1/26/07, Jonson Player <jonsonplayer@gmail.com>
wrote:>
> Hello,
> I just buyed a SPA3102 from Linksys. Can anyone help me or guide me to
> configure voice part on it. I cannot get it if I can use like peer for my
> asterisk. Please help me with some tips.
> Thank you guys.
>
> Regards,
> Jonson.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070126/34dc893b/attachment.htm