similar to: Polycom multiple registrations

On the polycom soundpoint ip 650 six line phone: Say I have 4 lines on hold, is there way to tell who I put on hold. I cannot see the caller ID of the other lines, only the last line I placed on hold. Thanks, --E -------------- next part -------------- An HTML attachment was scrubbed... URL:

I got em. You want em? Anyone know how I can get these to the site listed on the Wiki? Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/dfee13b3/attachment.htm

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

Hi all, I've got 12 Polycom 430's behind a NAT that are working pretty well except for one thing: If one of my users is on the phone when another call comes in, there is about a 10 second time during which the user can't hear the call they're on. Then it returns to normal. My research indicated that I needed to add these setting to the phone:

Hi All, Can someone please advise me about configuring my Polycom IP600? I have an account with a SIP based IP Centrex provider. The basic SIP info and line 1 config points to them. That's working fine. I'd like to register line 2 with my own asterisk server. I've tried putting the basic registration info in the line 2 configs...but the phone never registers. Not certain how to

I set up hints and presence monitoring on some Polycom phones connected to an asterisk server with the expectation that the phones that are "watching" other extensions would be notified when the other extension sis ringing, in addition to the other statuses (on the phone, statuses set by the user on the phone, not registered, etc). I can see when the line is in use, and when it is

For the last few months we have intermittently been experiencing some very strange registration problems with certain polycom phones. Here is some background information: I have about 150 Polycom Soundpoint IP 600s, 601s, and 650s spread between 8 servers at different locations. Each phone is on the same network (and subnet) as the server it connects to. There is no NAT or anything else strange

I'm trying to figure out how to allow an extension to register more than once. For instance, I have all of these 4 line IP phones that I use with Asterisk and I would like to have a persons extension (say 101) ring at all four lines so that if the person is on the phone they can take another call, but it appears as though if you try to register the same extension more than once then the most

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

I am starting to get the hang of this, I think. These are more implementation questions; "is this a proper/good way of using/doing this" kind of questions. The IP501 has three line appearances. I have learned that shared line appearances cannot place calls, only receive them. They're indicated by the "half telephone" icon beside the button. Private line

Hi - I'm wondering if any has experience with the Uniden UIP-200 phones. The product info says that the 8 led buttons at the top are all programmable. Can they be programmed as separate line appearances (ala Snom 200, Cisco 7960, Zultys Zip4x4, etc)? In other words - is the phone capable of multiple SIP registrations? Also, the post about these phones at voip-info.org mentions some

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

Hi, I am using Polycom 501 and I came across a problem. As soon as I have incominglimit=1 in sip.conf, which is necessary for buddy watching, I cannot transfer calls. On the console it tells me: Call from user '3052' rejected due to usage limit of 1. Can someone please tell me how to get around this problem? (I don't know if this is relevant, but in the phone.cfg file, I have

Hi All - I noticed that the Polycom IP501's are now shipping. Has anyone gotten one yet, and if so, what's different about the phone? Any UI improvements, or is it just better hardware? Thanks, Noah

I'm having some difficulty setting up a Polycom 501 with two different extensions. I've set up in the phone's xml file the proper reg.1withlineKeys = 2, and reg.3 with lineKeys = 1. I have also set up the sip.conf file on the Asterisk box correctly. However, the phone is not making any sort of registration request to the Asterisk server. Is there something else that needs to be

I have the Polycom 500 and 600 phones. Rather than put an entry in for each line appearance, I would like to use the feature that shares one extension for the lines, so that I will get the call on the enxt available button. How do I configure that? Chris Mason

hello, I try to set up two lines per ip 300 phone, registration is ok but i get Failure to authenticate 407 for subscribe. Anybody could help me to configure Asterisk in order to set instant message and presence ? I've tried with Ondo sip server it's ok ! Regards D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail

Hi - > I am not sure what I did but blind transfers do not work. The Polycom does > not allow me to dial the extension of the person I want to transfer to after > I hit: > > transfer -> blind I would strongly suggest getting the latest firmware, and using the sample configuration files with that firmware to set up your phone. This SHOULD work. If it still does not work

I am getting to my wits end with these phones (and so is my boss). I am getting an random echo on these phones and I have an issue opened with Polycom and its been in their research and development department for almost a month with no results. I have noticed that I get a message "RFC3389 support incomplete. Turn off on client if possible" in asterisk. I have researched this and made