similar to: Polycom or Linksys phones bootp tftp config setup

Hi All, Anyone know the sip header to send to a Linksys to resync it's config file? Thanks. JR -- JR Richardson Engineering for the Masses

I installed SPA942 and SPA2101, and experimented with TFTP and HTTP provisioning. It all went smooth for many hours. But then all of a sudden it stopped reading configs from both from TFTP and HTTP. Now I am trying to troubleshoot and cant't find the problem. Once in a while, it does read from TFTP and/or HTTP, but then again, stops reading at all. My other phones, i.e. Grandstream and Aastra

Is anyone out there using any of the newer linksys phones since Cisco took over? I am more specifically looking at the spa-941 & 942's. Just curious about call quality, programability, and functionality with asterisk. I have read through the literature, but would like some real world feedback. Thanks

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

i am using tftp-hpa 0.32 to transfer boot image files of an aix 5.2 system. packets begin to go across the network and then they stop at about 4200 packets. when i boot from aix bootp server 15227 packets are transfered. i have tried with both xinetd and standalone modes with many different options. i am not sure why it is failing to transfer the entire image. are there certain options with

Hi people, I'm having problems of connection with a Linksys SPA IP PHONE 942 when I use the WAN port, most of the time when I try to connect to the network or restart the IP Phone I can't get internet connectivity . I tried using both static IP and DHCP, but the problem is the same. Some have had similar problem with this brand of IP Phone? Thanks for the help and attention. Hugs

Hello List, After seeing a few positive responses for the Linksys SPA-942 phones I was hoping to get some answers on the following questions: * How do the phones handling system wide paging? Is it similar to the Polycom phones? * Can a corporate directory be configured with the phones using Asterisk? * How is the speaker phone quality? Thanks Roy Anciso Director of Technology Manistee

Can someone please help me with a problem that I seem to have with this Polycom 601 phone. It will not see my TFTP server and keeps saying "Could not contact boot server, using existing configuration". I have Linksys phones that use the TFTP server without any problems but this Polycom will not see or use it. Please Help. -------------- next part -------------- An HTML attachment

Hi Guys/Gals - I don't post here often but I read with interest all the postings. - I've been on a lot of mailing lists, but this one is by far the most interesting. I've been doing a lot of work with 'tftp' loading Cisco 79xx phones with firmware, configs. for asterisk, etc. And I see where a lot of folks have trouble with 'tftp', use alternate port numbers

Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet !

Using PXELINUX and MEMDISK I started a MS-DOS-Diskimage. How can I get the DHCP-Options or BOOTP-Tags from within MS-DOS?? (Like bppatch from 3com.) Thanks! _______________________________________________________________________ Jetzt neu! Sch?tzen Sie Ihren PC mit McAfee und WEB.DE. 3 Monate kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220

All, I realize this is not strictly a PXELINUX question. So I hope you'll indulge me; hopefully some of these PXELINUX experts have seen this before. And can tell me what I'm doing wrong. Or confirm my suspicions. I have a test lab server at work. Split config. The network team manages the DHCP servers, points to our TFTP server. Test subnet has 3 DHCP pools. BIOS PXE, UEFI PXE and

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone know how the Linksys PAP2T ATA's can be mass provisioned? Documentation seems to be sketchy, even on the Linksys web site. Thanks, Doug. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070607/3f90695c/attachment.htm

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

I have this Aastra 480i phone, and you can set the TFTP server IP address manually in the phone, but there should be a way to have it find the TFTP server information via DHCP. Does anyone know if this is possible, and if so, what is the attribute I have to set on my DHCP server? Thanks! __ Dana Olson Disclaimer: The information transmitted in this message is intended only for the person or

Hi, Aastra IP Phones have two configuration files on TFTP, aastra.cfg and <mac>.cfg. Both are in text format, which makes editing easy. And aastra.cfghas system wide settings and <mac>.cfg has settings for each indivifual phones. This makes it really easy to change the global parameters system wide by changing only one aastra.cfg file. On the other hand, as I could understand, for

Hi, I'm stuck doing an install with Polycoms at a small office with no RJ-45. They went wireless 100%, poor them. I insist on using Polycom unless it's impossible because that's what I am standardized on for many reasons. What's the best way/device to turn a wired Polycom 501 (or any Polycom for that matter) into a WiFi phone? Mike -------------- next part --------------

i just discovered the alternate ftp server syntax for pxelinux in the changelog today. this interests me as I would like to use pxelinux on a linux box to give a config file which tells pxelinux to fetch the windows 2003 bootloader program (actually startrom.n12 from windows 2003) from the windows box. IE: label windows kernel 192.168.1.2::startrom.0 since i can watch the fetching of

I was just browsing my local suppliers list of headsets - not a single one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. Can anyone recommend a headset that works with e.g. SPA-921 and -941? /Per Jessen, Z?rich