Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet ! sip show channels shows the call setup with ulaw. Any guidance will be appreciated. Thanks. JR -- JR Richardson Engineering for the Masses
JR Richardson wrote:> I have 1.4.9.1 setup, with the compiler flags enabled for T38, and > have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes > between devices but can't seem to invoke T38 pt UDPTL. It's enabled > in sip.conf [general] and well as the [peer]. > > I get an error at the CLI: > WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite > after T38 session not handled yet ! > > sip show channels shows the call setup with ulaw.Try setting canreinvite=no for the peer doing T.38. It looks like the code in Asterisk 1.4 will not allow re-invites for an established T.38 passthrough call. -- Russell Bryant Senior Software Engineer Open Source Team Lead Digium, Inc.
> JR Richardson wrote: > > I have 1.4.9.1 setup, with the compiler flags enabled for T38, and > > have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes > > between devices but can't seem to invoke T38 pt UDPTL. It's enabled > > in sip.conf [general] and well as the [peer]. > > > > I get an error at the CLI: > > WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite > > after T38 session not handled yet ! > > > > sip show channels shows the call setup with ulaw. > > Try setting canreinvite=no for the peer doing T.38. It looks like the > code in > Asterisk 1.4 will not allow re-invites for an established T.38 passthrough > call.I saw a post about the re-invites, so I tried it both ways, canreinvite=yes/no with the same results. Thanks. JR --- JR Richardson Engineering for the Masses