similar to: Polycom 430 , 501 and 550

Hello; Anyone used PoE L2 network switches other than cisco and recommend this for us? We need it to be stable and costly effective. Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130714/54feca5a/attachment.htm>

Hello; We have a cisco switches but they are not PoE and we need only to have PoE device so the cables come for it first to provide the power and then goes to the switch (to be like batch panel), is there something like this that can be used for the IP Phones? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi List; Can someone advise me which IP Phone model that has buttons that can be assigned to do specific functionalities (call pickup, call formward, call appearance) and a transfer button and hold button? Which is the best of the following (that has buttons can be assigned to specific functions): Cisco 7970 or 7960 Polycom 501 Grandsream IP Phone Budge Tone 1001 or 1002 Linksys SPA 942 or 922

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

Hi List; Any one can advise me to a good link to see and buy Polycom IP Phones? Also, if I need support (in case the Phone was damaged and need to replace, so the warantee), so which web can provide that? I do not need to buy from one and he is not responsible for support. Regards Bilal ____________________________________________________________________________________ Be a better

Hi All; Anyone can advise for a good IP Phone that has the ability to support SIP firmware and IAX firmware? Ofcourse, SIP there is a lot, but we need also the ability to use IAX (as it is good for NAT). Any advise. Regards Bilal ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo!

Hello, At one of our locations, we have started to see Polycom 501s (running 1.6.7 firmware) randomly reboot. We have taken packet traces of the phones to determine if there is something odd in the Layer 2 or 3 of the network that might cause it, and have not seen anything strange. There are no errors on the ports. This appears to be affecting POE powered as well as AC powered phones. The Polycom

I have a 501 with traditional power and a 301 with PoE. I rightfully assumed that the traditional power from the 501 would work on the 301. How do I get the PoE to work? Do I use the Polycom PoE cable in addition to whatever PoE injection method I use? I have a Cisco PoE injector that works on my Cisco AP350 and my 7960. No combination of this injector, the Polycom cable, and the phone result in

Hi All; I succeeded to have a success call from Polycom behind NAT while Asterisk has public IP address, but I was not able to have a succeed call (it was established, but no voice running, and then the call disconnected) if Asterisk behind NAT and Polycom behind NAT. When Asterisk behind NAT and Polycom behind NAT, I forwarded the 5060 UDP to asterisk (at asterisk router) and to Polycom IP

2011/11/30 Mike <list at net-wall.com> > Hi Olivier,**** > > ** ** > > It if occurs only on the sidecar, I would imagine this is either a > defective sidecar/Polycom phone, or a defective PoE switch not giving > enough power. Changing PoE port would eliminate of confirm the PoE port > being the issue, but I?m betting on a Polycom defect.**** > > ** ** > >

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

Hi; If my landline service provider does not provide the ability to send the SMS, and I need to send SMS from asterisk, then what is the required? How? Is it possible to send SMS from asterisk using SIM card to be connected via GSM adaptor connected to FXS ports? Or HOW?

Hi, folks: I just took delivery of new PoE cables (PN 2200-11077-002) for our Polycom phones here in the office. I have the following to report, for the erudition of existing Polycom users and those considering purchasing Polycom sets from the set of models noted in the subject: 1. The cables do indeed work (hooray). 2. The cable has a module on it about a third of the way from a female end.

Hi All; Anyone knows an IAX IP Phone works fine and tested? Does polycom support IAX IP Phone? Regards Bilal

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Hi List; Is there an Digium cards support GSM SIM cards so we can fix an SIM card to be used for calls within mobiles as it is less rate? Or I have to use an FXS to SIM adaptor? If yes, then anyone advise a models and prices? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo!

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Hi All; I do not know if anyone faced such case in dealing with open vpn (as we need it for fring to be used from the mobile: Which mobile can be used to install the open vpn client on it, so we can use it to do a vpn channel with the server that has open vpn server? Regards Bilal

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

When I bought two Polycom 501 SIP phones, I naively thought they were Power-over-Ethernet (IEEE 802.3af) because they were "powered over ethernet." Silly me. Polycom must have some odd voltage or funny way of injecting the power, because the POE switch I bought for them (Netgear F@510P) won't power them, though if I use the Polycom-supplied AC adapter and ethernet power