similar to: Polycom 501 issue with latest firmware : sluggish keys

Somebody was helpful enough to give me the very latest release of Polycom's firmware (2.1.0). Unfortunately, I still get that issue. So I'm stuck asking again: Anybody ever got that? Mike _____ From: Mike [mailto:list@virtutel.ca] Sent: Wednesday, April 11, 2007 13:37 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Polycom 501 issue with latest

Here is what I had to change on the phone1.cfg file: I had this value in my 1.6.7 file, put in there following suggestions from the Wiki (http://www.voip-info.org/wiki/index.php?page=Polycom+Soundpoint+IP+501) : reg.1.server.1.expires="30" Now, this worked flawlessly with 1.6.7. But with 2.x, this seizes up the phone with a huge CPU load (approaching 100% at times) and makes it

> I ran into this problem with an early batch of IP650s. Polycom's firmware > version 2.0.3b made this issue go away. Speaking of Polycom firmware, anyone have an up to date source for the stuff? The site I ordered from took down their FTP site that had it. :( -Kenneth

Has anyone on here used kiax before? I am asking because I have it installed on several computers and have been able to get it to connect and register to my Asterisk box. I can even call between them and my SIP softphones. The problem I am having is this: when I use kiax to call someone else, they get some kind of background music playing while I am talking to them. I have called from kiax to

Hi, I've recently bought new Polycom 501 phones, upgraded to bootrom 3.2.2 and SIP 2.0.1. I just noticed something, which I first blamed on Asterisk and NATs (a 2 second silence at the beginning of a call). Something I've noticed also on my old phone (which is having the same problem now, but its also been upgraded). My keys are sticky. Simple as that. Sometimes I press a number

Dear list, I am trying to configure the nagios plugin called check_sip. I just read the README file included with the plugin. I follow the readme steps to configure the plugin, without success. In the nagios web interface I can see (No output!) In the status information column. If I run the chech_sip plugin from a linux console, I get /usr/local/nagios/libexec# ./check_sip -u

Hello, I would like to access the Audio-Files from my Apache Web Server and would need the voicemail files generated with rights 644. Any idea how to do this? thanks Thomas

Hi, I have sort of a strange problem. We just bought a few polycom 501 phones from our supplier, but they shipped them with the SIP firmware, though we need them in H323. Does anyone here know where one can get ahold of the H323 firmware. I tried going through Polycom's site directly and can't seem to find anything. Please let me know Thanks S. -------------- next part

Hi Guys, A while back (several months ago) I was having issues with wmy Polycom's and Asterisk. I was told to use a specific set of firmware and sip version. I am unable to find that email. Anyone know which ones work well with Asterisk ? (I believe it was 2.x ) Thanks, Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I have a number of Polycom phones 601's and 430's and I'm seeing: Got SUBSCRIBE for extensions without hint. Please add hint to s to context local-hints in the CLI over and over. I have: [local-hints] exten => 110,hint,SIP/110 exten => 111,hint,SIP/111 exten => 112,hint,SIP/112 exten => 113,hint,SIP/113 exten => 114,hint,SIP/114 The hints seem to be

Hello, At one of our locations, we have started to see Polycom 501s (running 1.6.7 firmware) randomly reboot. We have taken packet traces of the phones to determine if there is something odd in the Layer 2 or 3 of the network that might cause it, and have not seen anything strange. There are no errors on the ports. This appears to be affecting POE powered as well as AC powered phones. The Polycom

Hey all,  I've been running a Win10 Pro (64bit) guest for some time now.... and originally it was pretty snappy and I had no complaints. Somewhere in about the last 3-6 months I've been noticing sluggish performance -- but not overall. The system is mostly remote so I do a lot of my admin via RDP or the local console with the KVM Manager. I recently did a complete fresh install of

Hi Reuben, I think I remember having the same issue when I first used icecast. I think from the best of my memory I swapped from using shout to IceS and this solved the issue. I could be wrong though my memory isn't too good and you may actually be experiencing something totally different than me, however I would say with your bandwidth a 128 stream shouldn't be a problem. Hope this is

Greetings, This is my first stab at this mailing list. Forgive me if I am over/under verbose. We have been running KVM for a while now and love it. Recently I have noticed a weird anomaly that is getting on my nerves. When I clone (GUI or virt-clone from CLI) both* virt-manager* and *virsh* enquiries get extremely sluggish. Using top I cannot see any resource issues. No I/O wait, the load

Hi, I am a newbie here. I just tried to set up mp3 streamer server on Redhat Linux 7.2, using icecast and shout. I then tried to connect to the server, from another machine and different LAN, using xmms. And the stream is so sluggish, it gets cuts off for every 2 seconds or so. Both LANs (the server and where I am connected from) are T1. My mp3 was all encoded in 128 KBps. I then asked someone

Hi, I am a newbie here. I just tried to set up mp3 streamer server on Redhat Linux 7.2, using icecast and shout. I then tried to connect to the server, from another machine and different LAN, using xmms. And the stream is so sluggish, it gets cuts off for every 2 seconds or so. Both LANs (the server and where I am connected from) are T1. My mp3 was all encoded in 128 KBps. I then asked someone

Slackware 10.0. Wine version whatever was current a month ago, how do I tell what wine version I have? Anyhow, I'm experience two issues: I have KDE setup with 4 virutual desktops. If I'm running WinMX via wine, and if I try to switch to a different desktop, it immediately switches back. I basically can't use the other desktops because I can't switch to them. Also, I can't

Thomas suggested posting these here so they don''t get lost. Making Scriptaculous Snappy: *) Drag/Drop - make release cost proportional to remaining distance For drag/drop - change the ''release'' animation time to be proportional to the remaining distance the dropped item has to travel. If a user drags the item almost all the way to the final location, the release time

On Thu, Feb 18, 2016 at 10:41:42AM +0100, John Obaterspok wrote: >2016-02-18 10:13 GMT+01:00 Martin Kletzander <mkletzan@redhat.com>: > >> On Thu, Feb 18, 2016 at 08:49:38AM +0100, John Obaterspok wrote: >> >>> Hello, >>> >>> I'm using virt-manager on my F23 box to run a Windows 10 image but the >>> performance is so bad it's

After the first `dovecot reload` the initial log process will not terminate immediately. The master logs: Nov 11 23:30:04 master: Warning: SIGHUP received - reloading configuration Nov 11 23:31:04 master: Warning: Processes aren't dying after reload, sending SIGTERM. Nov 11 23:32:04 master: Warning: Processes aren't dying after reload, sending SIGTERM. Nov 11 23:32:04 log: Warning: Killed