similar to: A200 card problem

Hi Please help me understand about the below issue ? [root at asterisk1 ~]# /etc/init.d/asterisk restart Stopping safe_asterisk: [ OK ] Shutting down asterisk: [ OK ] Starting asterisk: /usr/sbin/safe_asterisk: line 86: ulimit: open files: cannot modify limit: Operation not permitted

Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports. One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am receiving a error log entry: chan_zap.c:

Hi Please help me understand about the below issue ? [root at asterisk1 ~]# /etc/init.d/asterisk restart Stopping safe_asterisk: [ OK ] Shutting down asterisk: [ OK ] Starting asterisk: /usr/sbin/safe_asterisk: line 86: ulimit: open files: cannot modify limit: Operation not permitted

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hi All, It's broken !! (drat) Asterisk if failing to load with the following error (taken from end of /var/log/asterisk/full) after adding bristuff. Can anyone help please? Jul 17 19:57:54 VERBOSE[2503]: == Registered channel type 'Phone' (Standard Linux Telephony API Driver) Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so]Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so] =>

Hi all, I have setup a Dell PowerEdge 2550 with a Sangoma A200 card with 2xFSO and 1XFS modules. The PowerEdge specs are 1 x P3 1133MHz, 512MB RAM. Sangoma A200 has 3 analogue PSTN lines connected. This server is based in Office 1, with 5 users all with a Linksys SPA942 VoIP Handset. There is another Office (Office 2) connected to here using VPN. There are two users in Office 2 with the

Hi I?m a new user and I do test with my hardware . I have a x100p and telephone vozip. And when I run this command asterisk ?vvvvc for to test it . My computer show it ?warning? [chan_iax.so] => (Inter Asterisk eXchange) == Manager registered action IAX1peers == Parsing '/etc/asterisk/iax1.conf': Not found (No such file or directory) Apr 2 07:45:12 ERROR[16384]:

Hi! I am trying to get my ISDN phone to work with my asterisk box. Now my asterisk won't start. Current situation: I have a cable from my Billion ISDN (Bipac V1.0) to my old NT1. The cable is crossed like this: 1 2 3 -> 4 4 -> 3 5 -> 6 6 -> 5 7 8 Then I have a cable from the NT1 to the ISDNphone(not crossed cable). Both cables are connected in the ISDN

Hello, i am trying to install sangoma a200d to my centOS server but i am receivig this error message: ZT_CHANCONFIG falied on channel 1: invalid argument (22) Please help me on hopw to solve this issue! tnx! kenjie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/fbeeb280/attachment.htm

Few days back I installed Asterisk 1.4.2 with Zaptel 1.4.0. All SIP accounts were working fine, today I tried to install a fxs Sangoma A200 card and got the following error. [Apr 12 01:15:17] WARNING[31018]: channel.c:3024 ast_request: No channel type registered for 'Zap' [Apr 12 01:15:17] WARNING[31018]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'Zap'

I've got IAX2 setup between two servers with this config: I have two servers on a switch: asteriskm is 192.168.0.160 and asterisk1 is 192.168.0.161 asteriskm has a Sangoma T1 card in it. I want to route calls from asteriskm to asterisk1 which will run an AGI IVR for the call. Config is below, but my problem is that 90-95% of the time when I start asterisk on the two servers I get the

Now that I have most everything actually working I've noticed that about every 3-4 days on average..... and at worse... Once a day my asterisk box seems to lose it's registered state with our sip provider and no longer will take any incoming calls. The caller simply hears a fast busy (reorder) If I do a reload at the command prompt all is well for another few days..... What I'm

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

Dear Folks, Anyone knows if Sangoma supports or going to provide support for battery removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it, which is a very nice feature but what about Sangoma? Regards. -- M. Shokuie Nia. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Has anyone ever experienced crosstalk with sangoma analogue cards on 64bit? We have exhausted every test to try and replicate this and find a solution with Sangoma tech support, but we can not fix it. We are about to try the card and four *seperate* UK BT lines in a 32bit system. The current system is a 4gb, dual core cpu with pbx in a flash 1.4, Zaptel and Asterisk 1.4.21-2 Currently we

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200

Hi: I am working on a new system with a TDM-400P card with three FXO modules and one FXS module. The system has been in place for a week. Users are complaining of echo problems. I have noticed this echo myself. It varies in severity. It is sometimes bad enough to make it difficult to converse, but the users find it generally unacceptable. They miss their old phones, which just worked. As you can

I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for the past month without many problems (other than the fact that the Sangoma card doesn't disconnect hung up calls immediately, which I posted about in another thread, and has still not been fixed), however, I had a call from one of our clients today and they complained that our phone system kept ringing through when they