Frank Sautter
2005-Feb-03 16:18 UTC
[Asterisk-Users] Q: How to get the preset callerid from a CLID-no-screen E1-PRI
hi, after several problems getting the right callerid on a E1-PRI there is (so far) only one problem left: when receiving calls over the telephone network from another E1-PRI that has a "Caller ID no screen" capability (e.g. a bank and a customer of us), asterisk does not get the callerid that is set up by the calling PBX, but the callerid of the trunk of the calling PRI. no matter if the callerid is within or without the assigned callerid range of the calling PBX. our customer uses this feature to show the callerid of the original caller when redircting a call to a mobile phone. i searched through the sourcecode of chan_zap and a little bit through libpri but did not find any variable containing the number. our ericsson BP250 PBX formerly connected to our E1 showed the callerid set by the caller correct. in the CDR of the ericsson both numbers appeared. any help is appreciated. regards frank sautter
Kevin P. Fleming
2005-Feb-03 17:31 UTC
[Asterisk-Users] Q: How to get the preset callerid from a CLID-no-screen E1-PRI
Frank Sautter wrote:> our customer uses this feature to show the callerid of the original > caller when redircting a call to a mobile phone.That is RDNIS, it shows the "redirected number". In other words, it's not CLID (Calling Line ID). Check the RDNIS channel variable to see what it holds when you receive one of these calls.
Seemingly Similar Threads
- Busy - problem with Asterisk spliced between Arcor E1-PRI and Ericsson BP250
- Q: ISDN / E1-PRI - fax problems - Receiving and setting of Service Indicator (SIN) / Bearer Capability (BC) / High Level Compatibility (HLC) / Low Level Compatibility (LLC)
- Problems splicing Asterisk with a TE405P between Arcor E1 PRI and Ericsson Business Phone 250
- Q: PRI leading 0 (area access code) or 00 (country access code) missing on incoming callerid
- sangoma 102 and CAB-E1-RJ45BNC