similar to: Should I use sip gateway of PCI card?

Hi all, Is using a Citel gateway with Asterisk a good solution for reusing of the old Nortel digital phones? Would love to get some input from actual users. Any/all opinions welcome. robert -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070510/bc5fc18f/attachment.htm

Hi All, What do you recommend? I was looking at: http://www.voipon.co.uk/sangoma-a200-fxo-fxs-analogue-card-pci-express-p-393.html But it will be 3 PCI slots. Thanks, Gavin.

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hi all, I bought a Sangoma A200 card from an online supplier and explained exactly what I wanted, 3 incoming phone lines to PBX and a life line (some where to connect a standard BT phone to the PBX incase the power goes, making the BT phone ring). I was told to order 1 x FXS module (2 FXS ports) 2 x FXO modules (4 FXO ports) However being a complete noob, I have connected the 3 lines to the

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http:// sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems running through or

Hi, I am working on developing a professional Marketing Materials for my systems. I plan on using a very good(expensive) company to do that so splitting the costs with several people would be nice. Let me know if you are interested on taking part in it. robert -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Has anyone Knowledge about softphone IAX for pocket PC totally free? Tkanks for all. -- Sandra Salmer?n Ntutumu <makevuy@ehas.org> Tlf. Analog: +34 914888405 / M?vil: 653574298 Tlf. IP desde FWD: 656212. Ext: 10 / Tel. IP desde EHAS: 010010 Fundaci?n EHAS: Enlace Hispanoamericano de Salud - www.ehas.org Telemedicina rural para zonas aisladas de pa?ses en desarrollo

Hi all, Occasionally, DIDs from different providers stop working for some reason. I would like to be able to monitor situations like that and react before any of my clients start going ballistic on me. Any ideas? Scripts you know of or wrote and willing to share? Any info?would be greatly appreciated. ? Robert ? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have a strange problem, when I try to connect to les.net from our local asterisk server through Procurve router I seems to be connecting on any port above 1024 and when I reload sip the port is changing too ... So I never get 5060? Any ideas on what is going on and how to resolve it? ? Sincerely, Robert Augustyn 519-997-3106 ext:802 www.linqone.com ? ? -------------- next part

Hi All, Has anyone had experiences with Asterisk and ISDN Gateways or cards? I am looking to setup a home phone system using asterisk and am looking to convert my two existing no's to a single isdn2e line. I was wandering if anyone could recommend which is better to use with asterisk - ISDN Card or gateway? also which brands are best with linux/asterisk? I have used eicon BRI cards for

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

Hi all, I'm quite new to R and have a very basic question regarding how one gets the standard error of the mean for factor levels under aov. I was able to get the factor level means using: summary(print(model.tables(rawfixtimedata.aov,"means"),digits=3)), where rawfixtimedata.aov is my aov model. It doesn't appear that there is an equivalent function to get the standard

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200

Hi all, Just want to check from the list experienced personal about the Digium HPEC, where I had purchased the HPEC and wish to run with TDM card Sangoma A200. I can't install HPEC to run with Sangama A200 card, even I had changed my hpec file from i686 to i386. The error that I had as bellow; > Found key 'HPEC-XXXXXXXXXX' for 2 channels. > Found valid HPEC licenses for 2

Hi, We have zabbix running and would love to be able to monitor our asterisk box with it. I believe that some sort of SNMP is build in 1.4+ correct? Where do I find more info or a how to on what is supported and how to use it? Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have been looking at the rhino r1t1, and digium single t1, and the sangoma, but from what i read they all sound like good products. Anyone have anything bad about any one of them? I am leaning towards the sangoma as it seems to have a better following here on the lists. Any advice is appreciated.Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently