similar to: AW: Snom 320 echo

Has anyone ever encountered an echo on the IP phone side of a call? It is an echo of the user's own voice. I believe that no one else in the office is experiencing this problem. The phone itself is a Snom 320. I've asked Snom for assistance since my source no longer carries Snom, but unlike previous times they've been slow to respond. ----- Mike Hammett Intelligent Computing

Please forgive me if this is a silly question. I've been following this thread in the hope that I could put my * server and snom 200 into full-time service very soon. I need to find out how to have the lines configured so that it does not return a busy reply when only one call instances is engaged. Am I supposed to create multiple extensions on my asterisk dialplan to reflect the 5 call

I don't know everything that's going on as someone else has been working on the project, but it hasn't really been going anywhere, so I had some questions. We've got some Snom 320s with Asterisk 1.2.9.1 (I believe). All was well (with a previous release), but the phones started to get real choppy. We are also running a softphone at this location and it was fine. The SIP qualify

I have a client that has 5 Snom 320s. 4 work great, one does not. I upgrade the firmware to the latest (6.5.2) and the problem goes away, but then comes back a couple days later. There is a slight packet loss on the phone (about 1%), though there is no packet loss on any of the other phones. I determine the packet loss by the Linux command "ping -f -c 10000 192.168.2.10". Outgoing

I think one of the differences is: We do pay attention to Asterisk and this mailing list ;-) CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Joao Pereira Gesendet: Dienstag, 31. Oktober 2006 13:47 An: asterisk-users@lists.digium.com Betreff: [asterisk-users] Snom or Cisco Phones? Hello I need to

Hello all, I instaled an asterisk 1.2.X, with two lines FXO and two snom 3200 phones, on an amd_64 processor. All goes well, the voice is clear on the remote side but in the Voip side, where the Snom 320 is placed, I hear my voice, but don't in the line, the echo is on the phone. I just play with zapata gain values and with the Snom mic volume, but the echos does not disapperars. the phone is

A client of mine has a Snom 320. Usually when he comes in each morning, it is asking him for a password. A power cycle brings it back to normal operation. How do I troubleshoot this further? --Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070221/0e4d3ab8/attachment.htm

Well, the response should go to the port number provided in the Via header. If there is a rport set, then to that port. Everything looks good in the log, the only problem is that the response is sent to the wrong port. The Contact port will be used later when the server wants to send a request (not a response) to the phone. CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces at

Hi there - I'm having some echo problems on my snom 320 phones. Anybody experience this before ? I don't have any issues with the sipura 841s I have though. Any help is greatly appreciated. Thanks ! Nora Lavelle -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello. I've been going through the archives, but can't discern the state or future direction of IAX on the SNOM100. The most recent image appears to be from September 2002. There was a message on this list stating that SNOM was coming to visit Digium last April with the intention of adding IAX support themselves. For a while there was reference to the I100E on the asterisk and/or

that is *very* cool. However, I am somewhat concerned about being forced to license the firmware (even if it is free) can you comment for the list the rationale behind forcing a license and how this might affect Snom users who, say, want to DOWN grade their firmware? ps is there a timetable for supported, formally released firmware version? -----Original Message----- From: Hirosh Dabui

What you can still to is setting the port on the phone to port 5060 - just as a little dirty workaround until there is a better solution available. CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] Im Auftrag von Jason White Gesendet: Montag, 29. Oktober 2007 10:01 An: Asterisk Users Mailing List -

Some of you might already know that we are releasing a new phone, snom 360. To make the phone well-known and stable, we have made a soft phone version out of it and offer it for trial or private use for free (for more details, see the license conditions). There are only few limitations to the phone. First of all, the audio subsystem will work only work with an acceptable quality if you are using

Hi all, One of my users reports frequently hearing echo on her Snom 360 phone, even while talking to other Snom phones (via Asterisk) on the same LAN (i.e., all-digital low-latency connection). I can never reproduce it though, and swapping the phone didn't help. Has anyone else seen "mystery echo" on Snom phones? Any suggestions for debugging? On my own Snom 360, I sometimes

Hi folks, in order to establish backward compatibility we made an image that automatically detects if the other side does not support RFC3264. Please try it out, we would be very interested if this image is a progress! http://snom.com/download/share/snom200-2.03b-SIP.bin Thanks, CS

AHA! # 1 is the case! Seems the user was fooling around with the phone after the firmware upgrade. Shame that that setting couldn't be locked out. Thanks to Mr Tahir and Mr Stredicke for their spot on responses. -----Original Message----- From: Usman Tahir [mailto:Usman.Tahir@snom.de] Sent: Friday, September 23, 2005 12:34 AM To: ColinA@landmarkmasterbuilder.com Cc:

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

I have a whack of Snom 360's. Occasionally, *some* of them, prompt the user, on the screen, for the registration password. You enter it, everything's OK. Next day, same thing. This is like on 5 or 6 phones out of a lot of 120. It's *always* the same phones. I haven't drilled down to things like firmware rev yet, since I ordered them all as one lot, but I'm wondering if anyone

Hello all! I have a few problems with Snom 320 phones: Problem A - Transfer out of Queues: We have a call center with some Snoms. We are using Queue and AgentCallbackLogin. As we run * 1.2.7.1 an agent could transfer a call out of the queue using the hold and transfer buttons on the Snom. This might have been the wrong way to do it all the time I found out later, but it worked. Now we upgraded

Hello, I just bought a Snom-320 from ATAComm. I plugged it into my LAN, registered it with *, etc. All my other SIP gear is Sipura and works fine, both on the LAN and over the Internet. The new Snom seems like it can't process the audio from the handset mic. A steady tone is garbled, even on the LAN. I've contacted ATAComm, Snom and the company representing Snom in the US. So