similar to: Using Asterisk/Digium card with Tadiran switch

Hello, We're in the process of setting up an Asterisk server, and are having echo problems. We have a Digium TE110P, and have tried the MG and MARK2 AGGRESSIVE echo cancellers, with a variety of gain levels and training times, and with both trunk and 1.2 branch versions of Zaptel, Libpre, and Asterisk. In all cases, callers from the PSTN hear their own voice echoed back after 1.5-2 seconds;

Hello, I'm working on an Asterisk configuration for a call center, and they bill based on the time spent talking to an agent, but not for any time spent waiting in a queue. The CDR information contains the entire duration of the call as billable seconds, including time spent waiting in the queue. I would like the billable seconds to only include the time spent actually talking to an agent.

Hi everyone I have a Digium card TE110P and after plug it, turn on the computer and configure, the LEDs don't light up in spite of what Digium FAQ says about the LEDs: When will the LED's light up on my TDM400P/TE110P/TE2XXP/TE4XXP? ... The TE110P LED's will light up RED when the span is configured and kernel module is loaded. If configured correctly and a circuit or channel bank is

I got this notion monitor-format = wav49 wav49 presents much louder than regular wav and gsm in my experience -- _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lenz Emilitri Sent: Friday, January 22, 2010 8:48 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users]

Hi All, I'm using the following code to produce some stacked bar graphs. *setwd("C:\\Users\\Tinus\\Documents\\NMMU\\R\\Seamounts")* *SChla <- read.csv("SM_Chla_data.csv")* * * *#Extract mean values from data file* * * *Coral <- SChla[185:223,] #Reduce SChla to Coral only* *coral <- with(Coral , aggregate(cbind(Pico, Nano, Micro), list(Depth),FUN=mean))*

Hi it's possible to use a Digium TE110P Single T1 / E1 PCI Interface for supply a E1 link to a old PABX ? Thanks

Hello, We are recording our calls to queues by putting the appropriate options in our "queue.conf". This is all working properly. We would now like to set the MixMonitor option to adjust the caller volume (which is very quiet). With the regular MixMonitor application, we would just add the "v4" option to make it much louder. I don't see a way to set this option when

I'm trying out a basic plot, but something about the way I subset my data leads to problems with the plot. Here is the first bit of my data set year,date,location,quadrat_juvenile,photo_location,photo_exists,genus,count,divers 2005,2005-04-30, 1 Fringing Reef,1, 1 Fringing Reef Coral Transect Pole 1-2 Quadrat 1,t,Acanthastrea,0,HP+MEM 2005,2005-04-30, 1 Fringing Reef,1, 1 Fringing Reef

Does anybody use Intel S3000AHLX board with Digium TE110P E1 card? Have you experienced any problems? I'm planning following configuration, so I would appreciate any experience both positive and negative. Best regards, -- Tomislav Par?ina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)270248 Mob.: +385(91)1212148 SIP: tomo@sip.lama.hr e-mail: tparcina#lama.hr http://www.lama.hr

HI, Anyone knows the current status of JIAXclient? I tried to recompile the sources available in sourceforge but they reference a old java package that I was not able to find. I tried to e-mail the author but seems that his account is no longer valid. I in need of a java IAX client that could be loaded as an applet. I know that is a lot of viable SIP alternatives, but due to NAT/Firewall

Hi, This error I got it just when I gonfigure zaptel support isdneuro 31 channels. But if I configure zaptel to support T1 and just 24 channels I have no problem. ######################################################################## #### # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # loadzone = it span=1,1,0,ccs,hdb3,crc4 bchan=1-23 dchan=16

Hello, I ran into an interesting problem earlier today. I have a Unix machine I maintain in a largely Windows shop. They use Windows Backup for their backups, and so I created a readonly share of the entire filesystem with one user, "backup", who is an admin user. This lets them back up the entire Unix machine by attaching to the "backup" share, but nothing can be changed.

Helo, I have problem with Digium TE110P connected to CISCO 3640 (port on NM-HDV-2E1-60) wth PRI E1 link. I use CISCO now for testing but when I tried with real PBX problem was exactly same. I have this messages in Asterisk conole and log sometimes: NOTICE[1115] chan_zap.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Usually 2-5 such messages in series, can be repeated after 10

I'd greatly appreciate your help in making a bar graph with multiple variables plotted on it. All the help sites I've seen so far only plot 1 variable on the y-axis Data set: I have 6 sites, each measured 5 times over the past year. During each sampling time, I counted the occurrences of different benthic components (coral, dead coral, sand, etc.) over 5 transects in each site site

We have a TE110P (single span PRI) and are having tons of echo on all calls, both incoming and outgoing. We didn't have any echo at all yesterday and nothing in any of the configs has changed. All of all calls follow this pattern: Cisco 7960 -> Asterisk -> PRI Here is my zapata.conf [channels] context=all-incomming switchtype=national resetinterval = 3600 priindication =

Hello; I would like to know what's new in motherboard compatible with a Digium card like: Wildcard TE410P or Wildcard TE110P. Thanks every body for helping me!!! :-) //vador

Hi list, I have a terrible noise issue with Dell SC1430 + Digium TE110P. The digium card is not sharing interrupts with any other device, as I saw in Dell's BIOS and also with "lspci -vb" command. After changing coax wire, UTP, balum, digium card ... I have found that the problem is in Dell box, so now I'm running the same Asterisk config in other server with the same

Hi R-Users, I have a student doing work with lionfish and she has been trying to analyse a multivariate dataset to see what variables/factors are influencing the behaviour of lionfish. We have attempted a number of analyses, including rpart, relimpo and standard linear regression but we are not having much luck with quality output. The data is very non-normal and we would appreciate some advice

Hi! Coral isn''t working from Xen. If you can please try it, maybe i''m just doing something wrong. However it works from outside Xen with the same setup. Can Xen cause this kind of DNS errors? Try something like: http://www.scs.cs.nyu.edu.nyud.net:8090/coral/ or http://www.google.com.nyud.net:8090/ -- /Varga Péter/ ------------------------------------------------------- The

Would any one recommend building a system with 1 TE110P, 1 TDM40B, and TDM04B? The reason I am asking is that I have a client that is migrating to asterisk and they still have a couple of FXO lines they can't dump yet. I have recommend a channel bank but they don't like that idea because of the cost. -Thanks