similar to: TDM400 hungup problem

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

hi: In my zapata.conf i have 4 fxo configured channels,for fxo number 1 to 3 i added polarity reversal property but for fxo number 4 i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized). what i want to do is to not let polarity reversal take effect on fxo number 4. that what i have in my

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

Hi, Im working with the following versions: -asterisk-1.2.12.1 -zaptel-1.2.9.1 And with the following card: 00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 201 I/O ports at c800 [size=256] Memory at fe000000 (32-bit, non-prefetchable)

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

Hi ! I have some issues, i don't know exactly if it's a busy detection issue. When i dial into the Asterisk box, and if i hang up before the Asterisk answers with the IVR Welcome message, the Asterisk goes on with the call. But, if i wait for the Asterisk to answer, and if i hang up, the Asterisk hangs up too. I have this parameters on zapata.conf: busydetect=no

Hi all.. I have a problem with my asterisk installation. I'm using a Wilcard X100P clone in Spain. Incoming calls work fine, but when I make a outgoing call, a hear the ringing, and the peer phone ring, when the peer answer, asterisk hangup the call, or say busy. This is my conf: zaptel.conf: --------- loadzone = es defaultzone=es fxsks=1 zapata.conf ---------- [channels]

Dear list, We have an weird problem with our FXO card (TDM01B). When I made a call using this channel, all goes well, the called phone rings but when the called phone answers the call. In me handset I can hear an weird sound like a "Clack". I tryed diferents TDM cards and modules, and my zapata.conf is like, language=en context=from-zaptel switchtype=national usecallerid=yes

Afternoon, I was hoping someone could point me in the right direction. I have an asterisk PBX deployed in China using a TDM400P based card. The incoming calls are being picked up correctly, but are not being hung up. I suspect that this might be an issue with the signaling that has been selected. If anyone here has deployed asterisk in china using an analog card, it would be a great help

Hello my friends... We are having some problems with the fax in our asterisk server... We have: Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P This digium card has 3 FXO ports and 1 FXS port where we have a fax machine connected! The problem is that we can receive fax very good, but we can't make any outbound fax call, in fact, our asterisk get freezed

I have one TDM2404E digium card on asterisk box, after configuring the zaptel and zapata configuration files, I am getting these errors when reloading asterisk: ast_unregister_indication_country: Removed default indication country 'us' setup_zap: Ignoring signalling setup_zap: Ignoring answeronpolarityswitch unable to recognize channel 13-5 what is the reason for that? Thanks,

I've just had polarity reversal provisioned by our telco to test hangup detect with a TDM400P I've set hanguponpolarityswitch=yes in zapata.conf When I start Asterisk I get "ignoring hanguponpolarityswitch" in /var/log/asterisk/messages I assume that the option is either not valid or conflicts with another setting somewhere. Any ideas?

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

Hello guys, I have this problem when a call is received in my PBX: (Caller) --> (Redirecting Service) --> (E1 PRI) --> (Asterisk PBX) --> (Internal Phone) Reception works fine, but when conversation finishes and the agent at internal phone hangs up, the call at caller's side is still alive for many seconds until it hangs up. The problem is that Telephone Company is billing me

Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

Greetings listers. I'm running asterisk 1.4.21.2 on SUSE 11.0 using Polycom 501 phones. My outgoing connections are Zapata using a TDM401P. For the most part I can make and receive calls fine except for these 3 issues: 1. When I call an external conference, the call never bridges and hangs up after 60-90 seconds. 2. When I call another number there is a

hello, I have instaled a analog line, and when I call on the console apears that: I want to redirect the call to 101 extension. *CLI> -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at default,s,1 failed so falling back to exten 's' == Starting Zap/1-1 at default,s,1 still failed so falling back to context 'default' Apr 27 08:15:53 WARNING[3494]:

Hello all, Recently I just instaled asterisk-1.2.14, zaptel-1.2.12, libpri-1.2.4 and Freepbx v.2.2.0. My zapata.conf look like this, (Pasted bellow) The problem is that the asterisk never send the callerID to the phones. I just take a look to the cdr database an there is no callerid too. I do not know why the calledID is not receibed. All this FXO ports are conected to a mobile lines and if I