similar to: Sangoma A200 hangup detection

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

Hi Guys, Looking for a powerful box that is compact, can take two hard drives for Raid-1 (no SSD, too expensive), have at least two Gig ports or two 10/100mbps ports. Fit two PCIe or one PCIe card plus it's daughter card which needs as much room as a PCIe and doesn't need the actual slot. That is for Sangoma A200 + Daughter card. I would be really glad if I can get some sort of a KVM

Hello, i am trying to install sangoma a200d to my centOS server but i am receivig this error message: ZT_CHANCONFIG falied on channel 1: invalid argument (22) Please help me on hopw to solve this issue! tnx! kenjie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/fbeeb280/attachment.htm

I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for the past month without many problems (other than the fact that the Sangoma card doesn't disconnect hung up calls immediately, which I posted about in another thread, and has still not been fixed), however, I had a call from one of our clients today and they complained that our phone system kept ringing through when they

Hi I was wondering if any one has used these cards, I am looking at this as a replacement for the tdm410, I have some issues with installing the tdm410 in a small case because of the power plug being at the end of the board. I am in australia seems like we have a different setup for out fxs voltage, any one in oz using this card ? Thanks Alex -------------- next part -------------- A non-text

Hi. I have 3 lines connected to a SangomaA200. All was working normally, but 3 days ago we experiment this issue. The outside callers can call us normally; but when we try to do an external call, just receive the message "all circuits are busy". Only happen with outgoing call. Incomming calls work fine. if the conf was not modified, what can i check to search the reason of that

Dear Folks, Anyone knows if Sangoma supports or going to provide support for battery removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it, which is a very nice feature but what about Sangoma? Regards. -- M. Shokuie Nia. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

Hi, Has anyone ever experienced crosstalk with sangoma analogue cards on 64bit? We have exhausted every test to try and replicate this and find a solution with Sangoma tech support, but we can not fix it. We are about to try the card and four *seperate* UK BT lines in a 32bit system. The current system is a 4gb, dual core cpu with pbx in a flash 1.4, Zaptel and Asterisk 1.4.21-2 Currently we

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hi all, I have setup a Dell PowerEdge 2550 with a Sangoma A200 card with 2xFSO and 1XFS modules. The PowerEdge specs are 1 x P3 1133MHz, 512MB RAM. Sangoma A200 has 3 analogue PSTN lines connected. This server is based in Office 1, with 5 users all with a Linksys SPA942 VoIP Handset. There is another Office (Office 2) connected to here using VPN. There are two users in Office 2 with the

Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports. One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am receiving a error log entry: chan_zap.c:

Hello! Im new to Asterisk configuration and I have few questions regarding its configuration. I have 4 PSTN lines connected to TDM410. I can make exact 60 minutes of free calls from each of 4 pstn lines... Can I configure Asterisk to call thru pstn line that has free minutes? For example Outgoing calls are going through PSTN 1 for 60 minutes. When I use all of these free minutes - outgoing

Hello All! I am in the process of assembling an asterisk-based phone system for my office - using SPA-3000s to connect the network to the PSTN. I am wondering if anybody else can get (or has already seen) the same behaviour out of their 3000. The short version: Send multiple Calls to the SPA's FXO port at the same time it is re-registering with Asterisk. SPA HTTP Configuration:

Hey Everyone, Has any successfully installed this on a Toshiba A200? Any feedback would be great. Kind Regards Matthew Ollerenshaw Network Engineer * +612 1300 887 959 | Ê +612 9890 8349 | * mollerenshaw@visinet.com.au<mailto:mollerenshaw@visinet.com.au> | www.visinet.com.au<http://www.visinet.com.au/> Diploma (Network Engineering) | Microsoft Certified Professional ( MS

Hello List, I am having a strange issue with a trixbox system we installed for a client, and I would appreciate any help on this one. The issue is that occasionally when they go to answer an inbound call from the Sangoma A200 - there is no one there, and they are presented with dial tone. The calling party is hung up. A bit of background: The client actually has two systems install (one at

I use Trixbox 2.0 with a Sangoma A200 I also have echo so bought the HPEC and yes it works brilliantly. The problem I have is I used to use Trixbox 1.? with this sam hardware and had a few inbound CLID issues on my UK BT lines, Sangoma support suggested changing the RXGAIN in zapata.conf and it worked. Now using Trixbox 2.0 and have upgraged to latest software Asterisk 1.2.16 Zaptel 1.2.15

Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http:// sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems running through or

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk

I have a TDM4xx card with two (3 and 4) interfaces for my land lines. I have a basic setup working with them and one VoIP provider. Questions: 1. How do I determine which Zap line the incoming call is on so I can handle it differently? One line is my home phone and the other is my work line. I would like different dialplans for each. 2. When I have my work line set (via Verizon) to call