Displaying 20 results from an estimated 100 matches similar to: "sound quality problem on mISDN"
2006 Jun 02
2
BN8S0 Installation problem - 0 devices registrered
hi
i am experiencing some problems with the configuration of an BN8S0 Beronet card.
I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel
2.6.16.18 and the enabled the following:
<*> ISDN support
x x Old ISDN4Linux --->
x x --- CAPI subsystem
x x <M> CAPI2.0 support
x x [*] Verbose reason code reporting (kernel size +=7K)
x x [*]
2007 Jul 24
2
Astribank-8BRI
Hello,
I'm in the process of building an Asterisk machine and need 5 or 6
BRI-Channels. I was looking for the beroNet and Junghans cards and
stumbled upon the Xorcom Astribank xBRI products.
Has anybody tried out the Astribank xBRI-Channel Banks? Are they
production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET
octoBRI ISDN?
Thanks in advance,
Lars
--
We don't like their
2010 Apr 28
2
BN8S0, dahdi, wcb4xxp
Hi,
a few month ago, I tried to install zaptel for my Beronet BN8S0 pci card... I
gave up and took hfcmulti/lcr. Now dahdi (2.2.1.1) seems to support the card
and I'm very interested to get it to work.
But how to get rid of these annoying qozap driver?
bishop dahdi # lspci -v -nn -s 01:00.0
01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network
Controller [HFC-8S]
2007 Feb 03
1
misdn and prostgres_cdr on asterisk 1.4
Hi
i am upgrading an asterisk server from 1.2.4 to 1.4.
i've installed libpri 1.4
i've installed zaptel 1.4
I've installed the new version of misdn with the script of beronet.
i use this configure script:
./configure --with-postgres=/usr/local/pgsql
then:
make menuselect
[*] 1. cdr_csv
[*] 2. cdr_custom
[*] 3. cdr_manager
XXX 4. cdr_odbc
[*] 5. cdr_pgsql
XXX 6. cdr_radius
2006 Jun 08
1
BN8S0 problem - Extension can never match, so disconnecting
hi
i've configured a Beronet BN8S0 Card with misdn beronet utility.
the card is configured with all lines in TE and P2P mode, and it is
connected with the special cable with an ISDN connection.
i've turned on debugging to level 4, this is the output from the
asterisk cli when i receive a call:
P[ 5] MGMT: Short status dinfo 1000001
P[ 5] MGMT: SSTATUS: L1_ACTIVATED
P[ 5] handle_frm:
2006 Jun 01
0
Problems with misdn and BN8S0
Hi
i am experiencing some problem with asterisk and misdn
i've patched and recompiled the 2.6.15.5 kernel on the server
i use a BN8S0 card with alla channels in TE mode.
i can load hfcmulti and mISDN_dsp
i load this with:
/sbin/modprobe hfcmulti layermask=0xf protocol=0x22 type=0x08
and then
/sbin/modprobe mISDN_dsp
dmesg returns me the following:
Modular ISDN Stack core $Revision: 1.34
2004 Oct 20
2
chan_mISDN problem
I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output:
Module Size Used by
zaptel 178308 0
avmfritz 21388 0
mISDN_isac 14336 1 avmfritz
mISDN_dsp 191424 0
l3udss1 34184 0
mISDN_l2 39040 0
2006 Nov 05
1
asterisk DTMF detection
Hi,
Hi All,
I've just delved into the world of asterisk and I'm having a few dtmf issues.
Internally, amongst sip phones, dtmf is fine.
Externally, if you ring from a GSM mobile, DTMF is fine, however if
you ring from a standard phone, DTMF fails to register.
I am attempting to use a quad port HFC-4S Beronet Card. I've been
searching the web most of the last week and
2005 Jun 06
3
Asterisk eating up 99.8% cpu
Dear All,
I am using Asterisk CVS-HEAD-05/05/05-15:46:09, and found it using up
99% of cpu 6-8 times in a day, even when its doing nothing or even if it
is, its not supposed to eat all the cpu.
whenever this happens, I need to stop it by issueing "stop now" 15-20
times on CLI or kill the process, then start over.
Please suggest what to do.
regards,
Umair bari
2007 Mar 30
1
Asterisk 1.4 with Digium B410P - Timing problem
Hi list,
we have a dual Xeon server with 2GB RAM running Debian Etch 2.6.18.4-686
kernel. The server has 2 B410P cards plugged in. No other card.
We installed Asterisk 1.4 trunk with zaptel trunk, ran make b410p, the
install mISDN1.1.0 (for bug 9064) configure and compile Asterisk with
chan_misdn, all is fine. In misdn-init.conf we have added
option=1,master_clock. Asterisk is up and
2006 Feb 23
0
isdn problem
Hi
I have beronet BN8S0 isdn card in my asterisk and , card is working
fine, but when I try to dial to special number 118913 ( telephone number
information) from polish telecom TPSA, I always geting timeout .
Bellow is isdn signaling dump :
--> * CallGrp: PickupGrp:
--> rxgain:0 txgain:0
--> * dad:118913 tech:mISDN/2-u25 ctx:default
--> * Setting Context to from-tpnet
-->
2006 Oct 16
2
asterisk upgrade
hi
i've got a production system running asterisk-1.2.4/ with
zaptel-1.2.4/ using a beronet Beronet BN8S0 and TE205P .
at the moment (fortunately) i'm not experiencing any kind of
particular problem, do you suggest me to upgrade asterisk?
and zaptel?
and misdn?
thanks
2006 Mar 30
1
Panasonic KXTD 1232 6
I want to replace a Telebutler software auto attendent system that used a 4 port Dialogic board connected to a Panasonic KXTD 1232 6 line system. We have spare computers here. How do I connect asterisk to this Panasonic system?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2009 Jan 05
1
B410p, Ast1.4, France Télecom Numeris Double T0 problem
Hi.
When I call my RNIS numbers (with a mobile phone for example), I can
see 2 incoming calls on the IPBX, which should not happend.
I'm not sure if it's a problem with the telco France Telecom and their
ISDN setup, or if it's a problem
with the MISDN driver on the IPBX itself.
I'm stuck ...
Any advices for troubleshooting that?
Someone provide working configuration files
2007 Dec 15
0
OpenVox B800P and asterisk 1.4/ mISDN-1_1_7
Hi
i've installed this software:
******************** SOFTWARE
mISDN-1_1_7
mISDNuser-1_1_7
Asterisk-1.4.15
******************** SOFTWARE
misdn is correctly loaded by misdn-inist start
Here there is the misdn.conf (copied from an existing and working
installation with Asterisk 1.2.x and one BN8S0)
******************** MISDN.CONF
[general]
misdn_init=/etc/misdn-init.conf
debug=0
bridging=no
2007 Mar 22
0
beronet BN8S0 and isdn phone
Hello.
I have problems to integrate an isdn phone. I don't know why but the isdn
phone rings only once and than it looses its connection to his base station.
I can make a call from the isdn phone to an VoIP Phone inside my network but
when i pick up the phone the isdn phone also crashes.
misdn.conf:
[ntport1]
ports=5
context=isdn-telefon
msns=*
extensions.conf:
exten =>
2007 Jun 27
5
North American voice BRI - Informal survey
Hi, folks:
I remain intrigued by the gap in BRI implementation between North
America and Europe, and I wanted to get feedback from the list members
on the matter. I'm seriously considering making the leap in our office.
In Europe, the idea that an office that does not have enough lines to
justify PRI would use analog lines is perceived as technologically
backwards, and yet that's what
2007 Jun 12
2
Data transformation for chi-square test.
Dear all R users
:
I am a IT student with few statistical background and new R user for only
have two month exprience. I have a data named medcost, import by
read.table() as follow for example (real dataset has 500 cases), the
heander id means case id, member means members in a family and cost is the
family pay for medical cost every 6 months.
id member cost
1 4
2007 Feb 22
0
cannot get whole DNID with ISDN line
Hi,
I have an Asterisk 1.2.9.1 with chan_misdn 0.3.1-rc23 and a beronet
octoBRI on a Debian box I have to set up instead of an old legacy PBX.
My problem is I get only the base DNID and not the extensions (the last
two digits) in Asterisk but the old PBX got all the DNID number so I
think it is the card.
Is there anybody experiencing a problem like this? How can I solve it?
Any ideas?
TIA
2005 Feb 18
0
More on W6692pci NT mode under chan_misdn
So far i've grasped that to use a card in NT mode it should have
layermask=3 as module option. Is it the only thing that sets TE or NT
mode for card? Perhaps there are settings in misdn.conf ? I can only
get the card to work in TE mode and even then when asterisk is ran as
asterisk -vvvgc it exits right after chan_misdn is loaded with theese
messages:
[chan_misdn.so] => (Channel driver