Hi I have beronet BN8S0 isdn card in my asterisk and , card is working fine, but when I try to dial to special number 118913 ( telephone number information) from polish telecom TPSA, I always geting timeout . Bellow is isdn signaling dump : --> * CallGrp: PickupGrp: --> rxgain:0 txgain:0 --> * dad:118913 tech:mISDN/2-u25 ctx:default --> * Setting Context to from-tpnet --> TON: Unknown --> TON: Unknown --> PRES: Allowed (0x0) --> SCREEN: Unscreened (0x0) --> * adding2newbc ext 118913 --> * adding2newbc callerid 717201234 I SEND:SETUP oad:717201234 dad:118913 port:2 --> mode:TE cause:16 ocause:16 rad: --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 --> channel:0 caps:Speech pi:0 keypad: --> urate:0 rate:0 mode:0 user1:0 --> pid:0 addr:51400102 l3id:11000c --> new_l3id 11000e --> * SEND: State Dialing pid:43 I IND :SETUP_ACKNOWLEDGE oad:717201234 dad:118913 port:2 --> mode:TE cause:16 ocause:16 rad: --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 --> channel:1 caps:Speech pi:0 keypad: --> urate:0 rate:0 mode:0 user1:0 --> pid:43 addr:51400102 l3id:11000e I IND :TIMEOUT oad:717201234 dad:118913 port:2 --> mode:TE cause:16 ocause:16 rad: --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 --> channel:1 caps:Speech pi:0 keypad: --> urate:0 rate:0 mode:0 user1:0 --> pid:43 addr:51400102 l3id:11000e I IND :RELEASE oad:717201234 dad:118913 port:2 --> mode:TE cause:-1 ocause:16 rad: --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 --> channel:1 caps:Speech pi:0 keypad: --> urate:0 rate:0 mode:0 user1:0 --> pid:43 addr:51400102 l3id:11000e Idx:0 stack->cchan:0 Chan:1 Idx:1 stack->cchan:0 Chan:2 Idx:0 stack->cchan:0 Chan:1 Idx:1 stack->cchan:0 Chan:2 I IND :CLEAN_UP oad: dad: port:2 --> mode:TE cause:16 ocause:16 rad: --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 --> channel:0 caps:Speech pi:0 keypad: --> urate:0 rate:0 mode:0 user1:0 --> pid:0 addr:51400102 l3id:11000e Trying to Release bc with l3id: 11000e * RELEASING CHANNEL pid:0 ctx:from-tpnet dad:118913 oad:118913 state: (null) --> * State Down --> Setting AST State to down * --> In State Dialin * --> Queue Hangup What I've tried to do: - set correct CallerID - use Dial app with option 's', 'n:h' , 'h' Without luck, but when I connect analog telephone to NT R-interface , after dialing number I have connection. Other thing is there is second similar number 118912 (abroad telephone number information ) , and I call to this number without problems. /pch -- Dyslexia bug unpatched since 1977 ... exploit has been leaked to the underground.