similar to: soekris hadware

Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a

Dear Forum Members, I just purchased two VoiSmart GSM cards. Tried to install one of them on my Fedora Core 5 system, The compilation was not smooth, as expected, but after a small fix, it went through. Then I put two SIM cards in the card's slots. Then I loaded the modules. Then I started the Asterisk. After all I configured the vgsm.conf file according to my settings, that is just changed

Hi. I am trying to use EXTLINUX 3.08 to boot a Soekris net4801 from a CompaqFlash card. BIOS reports the CF card as the first master harddisk. During boot/load the loader hangs after this output: EXTLINUX 3.08 2005-05-19 PXELINUX and LILO works fine on the same setup It this a general problem with Soekris/net4801 and EXTLINUX? Regards Johan Linn?r

Hi all, first of all thanks for your comments and ideas. I wrote because i wanted to know if i'm wrong or not and to let others khow how some companies operate. I work on technology, i work in the world we move, and i usually are in charged of handle situatios like that, and what i can tell all of you is that, if the system is faulty upon recepion, the only one common practice is open an RMA

Hi, I am still struggling with the E1 card!!!! Does anyone has some experience with sangoma E1 card? I have this card in soekris net 4801. First I was runnig it with deactivated DMA and I was receiving overruns (even with no channels in use). Then I enabled the DMA. Now I have the overruns only during a call. When I'm using more than one channel, the voice is stuttering and the delay is very

Hi all, I have a "Cologne Chip Designs GmbH ISDN network controller" and I want to terminate voip calls via this ISDN card. My question is: How I must to wire the ISDN equipment with my ISDN card? With normal cable or crossover? How I can to check if ISDN card is linked with ISDN equipment? In this moment I have 1:1 cable between ISDN's, the mISDN is installed and "misdn

hi does anyone have an idea how it could be possible to do email -> fax gatewaying with asterisk + app_txfax, but still keep track of who sent the fax? i've thought a little about smtp auth, but it doesn't look too easy to integrate smoothly with asterisk.... roy

Hello list, I'd like to share something u all , so that i could understand whats going on into my Asterisk box. i have a setup like this client(ip phone) -----ip network------- [Asterisk]----ip network -------[Service provider] i have configured A2biling in my Asterisk box. so when client call to my Asterisk A2billing's ivr respoce , my client authenticate there pin and call . all

Hi all, I hava SER with many clients (sipura SPA2100). One of these is an Asterisk which have others clients (sipuraSPA2100). I also have a Cisco GW which give me access to the PSTN. I make calls to all IP phones in my network, but I can't call PSTN numbers. After I dial, I hear 2 ringbacks but at the same time Asterisk says: Called pstn_number@SER_ip_address SIP/SER_ip_address-ec75 is

Hi, I tried to find a reference in terms of size but got back a bunch of tech documents and couldn't get the idea of wav49 format. wav49 format is supposed to be half the size of a normal wav right? so, how much disk space takes to save one minute of audio in wav49? I trying to do some capacity planning for a voicemail server. -- ------------------------------------------------------------

Hi List, I would like to know if there is a way to detect gateways which time out (because of network problems or hardware failure for instance) when you send traffic to them. So when you do: Dial(SIP/number@gateway) If a call couldn't get through because the gateway has timed out, i want to do something about it. The idea would be to suspend gateway which time out for 60 minutes,

Hi, Did anyone try to install Asterisk on the Mini-Box M300 with a Versa mini-ITX board 1GHz VIA x86 CPU? The box looks promissing, but I am not sure if Digium cards are compatible with the mother board (Versa mini-ITX) Also I am not sure if the 1GHz VIA processor can handle a Digium 24 port analog board, or an E1 digital board. If anyone had tried the Mini-Box, the processor, of the mother

Hello everyone. I've got a HFC ISDN card that I'm using with chan_misdn and it basically behaves like crap. Echo is waaay worst then echo I get TDM400 card, sound is "choppy" (there other side is allays complaining about sound interruptions) and to top it all it detects fake DTMF's all the time. Is this a chan_misdn problem or is it a card problem? I really need to get

Dear Asterisk Comunity, I'm thinking about developing a callback application based on the following scenario: 1. Customer Calls the outgoing number which is a PSTN line connected to my Zap channel 2. Asterisk captures the Caller ID and calls back the customer. 3. As soon as the customer picks up the phone, asterisk plays a promt to enter the Destination number. 4. Asterisk Connects the

Dear all, I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 (comBIOS 1.33). This combination appears to not work out of the box... I see much advice floating around from a few years ago, hinting that earlier versions of PXELINUX might have worked. However before resorting to archaeology I'd be interested in feedback from others who might have got through this. I

Hi, I'm trying to setup a system where incoming faxes are received using SpanDSP and then send on to another (remote) fax machine. The SpanDSP part is working excellently, however I dont seem to be able to get the forwarding part to work. Heres what I put into my extensions.conf: exten => s,4,Answer() exten => s,5,Set(FAXFILE=/tmp/fax-${UNIQUEID}.tif) exten =>

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Hello Masters Here i going explain what Iam doing and where i need help .. Iam running Sip Express Router ,Asterisk, on same box (for testing) my Sip express router is working fine and i can accept global register requests with valid account and in front of Sip express router (SER) Iam using Mediaproxy-1.4.2 which is handler to rtp/rtcp streams between nated clients

We found at the wiki a link to soekris and wonder if it is good? Is anybody using it and can share some experience, please? We would like to use it as a small PBX including a wireless access point, so that we can also use WiFi phones. bye Ronald

I'm working with a Soekris net45xx SBC and I'm experiencing problems using any syslinux code (syslinux, pxelinux, extlinux) above version 2.20. I'm interfacing with the Soekris via the serial console port, which is the primary bios console. I've tried different configurations with setting serial in the config file, but no change (though I dont even thing it's getting to reading