Hi all, I have a "Cologne Chip Designs GmbH ISDN network controller" and I want to terminate voip calls via this ISDN card. My question is: How I must to wire the ISDN equipment with my ISDN card? With normal cable or crossover? How I can to check if ISDN card is linked with ISDN equipment? In this moment I have 1:1 cable between ISDN's, the mISDN is installed and "misdn show stacks" said "Stack Addr:40000104 Port 1 Type TE Prot. PMP L2Link UP L1Link:DOWN" Thanks and sorry for my english. PS is my first experience with ISDN lines. -- Serghei.
Straight cable for TE mode and Xover for NT mode you have to make a call, than L1 should go up> I have a "Cologne Chip Designs GmbH ISDN network controller" and I want to > terminate voip calls via this ISDN card. > > My question is: > > How I must to wire the ISDN equipment with my ISDN card? With normal cable or > crossover? How I can to check if ISDN card is linked with ISDN equipment? > > In this moment I have 1:1 cable between ISDN's, the mISDN is installed > and "misdn show stacks" said > "Stack Addr:40000104 Port 1 Type TE Prot. PMP L2Link UP L1Link:DOWN" > > Thanks and sorry for my english. > > PS is my first experience with ISDN lines.-- WoodOO-[P]an[G]alaktikan[A]gent-People <][> http://shadow.pganet.com wpeople@shadow.pganet.com]iCQ#33118021[wpeople.on.iRCNet]wpeople@RedHat.users