Maybe try another type of card in the soekris to make sure the PCI slot is working properly. Maybe an ethernet card for example. I have 1 4801 and a couple of 4501 doing VPN stuff. but I've not tried asterisk on them. Soekris needs remove a couple ethernet jacks and make a box with 2 FXO and 3 FXS onboard. I wouldn;t think it would more than $50-75 to the cost of a board. Can be the Soekris PBX... -bill Matt Ryanczak wrote:>Hi All, > I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO >card only to find that the Soekris will not boot with the card >installed. The LEDs flash for a second and then nothing, it does not >boot. I've tried 2 different X100p cards, both of which work in a >regular desktop system, and still have no luck. I tried a different >Soekris 4801 with no luck. I've also tried a larger power supply with >the Soekris with no luck. I tried to post to the Soekris list but it >seems to be having issues right now. > > My question is: Has anyone seen a Soerkis 4801 run with a X100P card? I >have read testimonials online that claim it works but I'm not seeing >good results on my end. Can anyone help? > > >Thanks! > > >Matt > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a larger power supply with the Soekris with no luck. I tried to post to the Soekris list but it seems to be having issues right now. My question is: Has anyone seen a Soerkis 4801 run with a X100P card? I have read testimonials online that claim it works but I'm not seeing good results on my end. Can anyone help? Thanks! Matt
I have no experience with the Sipura product. Does it work well with Asterisk? It looks like it would definately fit my needs. I need one FXO and one FXS interface and it looks to fit that requirement. This particular 4801 (I have a few) is currently running debian off of a 512 MB CF card (with lots of room left over). Thanks for the info! -Matt Steven P. Donegan wrote:> Be very careful with your 4801 - Soekris boards are designed to only > support 3.3V PCI at very low power levels - putting a TDM card in > there would very much exceed the allowed power use on the PCI connector. > > My setup will be using my Soekris 4801, a 40G 2.5 IDE drive for > voicemail storage/boot and a Sipura SPA-3000 for FXO/FXS ports - total > micro-PBX cost in the <500$ range. >