similar to: Paging, Aastra 9133i, and Being on the phone!

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the 480i

Hi, Does anyone have experience with Asterisk and the aastra 9112i or 9133i phones? I am looking at purchasing some, and was curious how quality, and stability was with them.

Hi, Some odd behaviour here. A friend and I were talking tonight, and it seems we have both seen the same problem. We are both using aastra phones (I am using 9113is). We have a connection to and from providers via SIP and IAX. When I place a call on the local hold of the phone, and then pick them back up I can hear them, but they can not hear me. However, if I park the call,

Hi, I have several aastra 9133i phones, which are connected to an asterisk 1.2.6 system. I have setup MWI on the phones to point to the IP of the asterisk server, but although there is a message waiting new in the mailbox, the phone's light does not light. Any thoughts?

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated

Hello everybody, I'm having issues with calls being dropped on Aastra phones, when the call is on hold. Tested with models 6863i and 6867i. I've figured that the call is dropped by Asterisk when it reaches the rtpholdtimeout limit. I've reported the issue to Aastra, asking them to implement some kind of "RTP keep-alive" feature on their phones. Maybe the phone could send

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the

I've been looking at the two phones Aastra 9112i and 9133i for our offices now. I was just curious if anyone could tell me about the ring tones. Specifically: 1) How many ring tones do they come with? 2) Can you upload your own ring tones? 3) If so, what format and how? (wav, mp3, gsm, etc. and TFTP, web management, flash, etc.) Thanks for any help. -- Tim DeBaillie 812-476-2721

Hey - I know there's some other people out there that have the 9133i ... has anyone gotten the DTMF tones to work after the far side picks up? I didn't have any problems out of the box with my SPA-841 phones... the aastra has been nicer so far, but I can't seem to get it to dial the touch tones after an auto-answer device picks up on the far side... I googled, to no avail. -Karl

After upgrading to 1.8.3.2 today, I notice that my Aastra 480i SIP phones no longer initiate hold music when a call is placed on hold. I seem to be having the same issue as the person here: http://forums.digium.com/viewtopic.php?f=1&t=77553 Has anyone else run into this issue? -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC

Aastra Telecom has released SIP v1.3.1 firmware for the Aastra range of IP phones (480i, 480iCT, 9112i and 9133i). The firmware and release notes (no updated admin and user guides yet) are available for download at: http://www.aastra.com/support/enterpriseip Contrary to what the version numbering would suggest, this is a significant update with many new features and bug fixes. See the release

I have a customer that has recently upgraded their network and now their Aastra 9133i phones are loosing their connection to the Asterisk server. They were using an external Asterisk server and now we have installed a new internal server with Asterisk 1.4.8 on a SIP/IAX implementation with no Zap cards. Only hard phones seem to be having problems keeping a connection to the server, soft phones

I am unable to get my 9133i to register with my asterisk server. I am including config files below, this a simple test network so there's nothing secret in the config files. I have upgraded the phone to the latest software version (1.4.3) I'm not sure what the problem is. I can call the phone from a softphone, but the 9133i says "no service" on the screen and I can't dial

hi i've got an AAstra 9133i ip phone, when i've bought it, i've set it to use a SIP/400 account on my asterisk, then, i've changed settings and i've set set phone to use a SIP/500 account . now, when i connect the phone to tthe network, it register itself on asterisk with both accounts!!! -- Registered SIP '500' at 192.168.100.188 port 5060 expires 120 --

Fellow list members, I have run into an issue where I encounter a delay at the beginning of a phone conversation when I make outgoing calls through Asterisk with an Aastra 9133i hardphone. This is most noticable when I call a voicemail system with the Aasta and then with a land line or other VoIP phone. The first word or two of the voicemail message is generally cut off. According to

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Hello, I have some Aastra 9112i's in production that almost function flawlessly. The problem I'm having is when a caller is put on hold they do not hear hold music. If they are on hold for too long (~ a minute?) they are hung up on. All other phones including Aastra 480i and Sipura/Linksys ATAs all seem to be working fine. Is this a quirk anyone else has experienced? Any

Hello. Just rx'd the sip - aastra 9133i. Haven't done sip before. My initial attempt at setup has failed. "No Service" Anyone want to contact me off-list or on irc ? Regards...Martin

Hi, Does anyone know of some way to make a light on one of the keys of an aastra phone light up (or go off) by sending it a command from asterisk?