similar to: TE411P or TE410P

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

Hi All This mail is from a new comer to asterisk , just exploring I was going through the digium web site , In need some advice and suggestions , which card I should chose , should I choose TE411P (with on board echo cancellation ) or TE410P If I go for TE411P , I will be spending 1,000 $ more and for me finance part is critical , will I face

I changed from a TE410P to a TE411P and fax carriers weren't detected anymore ! I have tried everything (recompile zaptel+asterisk+spandsp ; echocancel=yes/no ; rxgain=0/txgain=0 ; increase Wait() ; ...), nothing worked. The only solution that worked for me was to install and use NVFaxDetect. HTH.

Hi all, I replaced a TE410P Rev C 1st Generation Firmware with a TE411P without any cfg changes (zaptel/zapata). As a result Asterisk crashes on outbound from PRI4 going to PRI1 calls: Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1 Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1

I am wondering if any of the Texas user groups have members in the North West part of the state. I am in the Amarillo area and would like to find some othere in this area, maybe even start a user group in this area. -- Bruce Reeves Nortex Networks -------------- next part -------------- An HTML attachment was scrubbed... URL:

I too had a server room fry and need to replace h/w. So what specific Dell servers did/do you deploy? Where is the link w/Digium/s Dell caveats? I'm using the Digium TDM400 card w/* > Date: Thu, 13 Apr 2006 19:19:13 -0500 (CDT) > From: Aaron Daniel <amdtech@shsu.edu> > Subject: Re: [Asterisk-Users] Digium cards, so disappointing ! > To: Asterisk Users Mailing List -

Does anyone have any information on how to use DUNDi precaching? Mark Spencer made a post 2 years ago where he hinted it may be possible to configure DUNDi such that you could centralise your DUNDi registration info by using precaching, instead of having each DUNDi peer meshed with every other one... http://lists.digium.com/pipermail/dundi/2004-October/000189.html However, it seems that no

Does anyone know how to disable the VPM in software rather than removing the card altogether? The canceler isn't working as well as the software cancelers were. Aaron

Has anyone got any neat solutions for Asterisk .conf file revision control? We have multiple Asterisk boxes here, that we'd like to maintain a _mostly_ common set of conf files on. They aren't all the same though. There's subtle differences. For example, in sip.conf, iax.conf etc, the bindaddr setting is different. Dundi.conf is very different between each system. At the moment I

I am getting ready to purchase my first Digium card to start experimenting with Asterisk. Before I make my purchase, I wanted to make sure I'm not going to have issues with these cards (need to see what the specs are on my box, 5V or 3.3V PCI ). I will be using Asterisk @ Home, so will be Asterisk v1.0.9. I took a quick poke at the lists, and it appears several people have been having

Hi all, 1. Just bought a new TE411P and about to install it replacing the existing TE410P. I am assuming I need to set echocancel=no and echocancelwhenbridged=no now that it will be done in hardware, correct? 2. Is there any way to monitor hardware echo cancellation to ensure it is working (apart from being on a call)? 3. The Digium webite says "By supporting 16ms with 128 channels or

Just emailing the list to see if anyone out there has used Vitelity? If so what has been your experience with service, support etc? Thanks Curt

I am so fed up with Digium cards. My company first owned a TE410P, I installed it in a Dell server and "enjoyed" its instability (we bought it months before Digium warned about the incompatibility issues). Then we switched to a TE411P for the hardware echo cancellation. Now we want to receive fax (< 20/day) on it and guess what ? Since April 2006 (again a few months after we bought

I am getting read to roll out close to 100 polycom phones and wondered if any one knows of a program to take a list of MAC addresses, extensions, and names and generate the configuration files? -- Bruce Nortex Networks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060504/d3bb612a/attachment.htm

I am trying to test out my PRI configuration on a server by conection another asterisk server to it. I have the T-1 cards up and both set to bchan=1-23 and dchan=24 in zaptel.conf I am getting lost on the signalling in zapata.conf. using pri_cpe makes sense for my target box, but I am getting the following errors on my source box if I use pri_net or pri_cpe signalling. May 31 17:15:06

Here's an interesting question: If I transfer a call from Asterisk system to another with IAX, is there any way I can get control back on the original system? Or.. do I lose control, and the dialplan has to continue on the new system? Scenario is we transfer calls to an Asterisk system that handles ACD queues. If the ACD queue times out, we want to send the caller to voicemail on another

Anyone know if a way to have voicemail files stored as mp3's? Thanks, Doug.

Hello all, I first want to thank everyone for all your contributions. I've building an asterisk system for a month or so now and without everyone in the online asterisk community I wouldn't have made it this far yet. Thanks! ...ok, mushiness out of the way.. :) I am looking for a failover and ultimately a load balancing asterisk solution. I've done a good bit of research and I

I am looking for input on wether the 4 port T-1 foneBridge is a useful device in a asterisk deployment. Would it be better to loadup a extra asterisk server to trunk the T-1's via IAX or is TDMoE safe in production enviroments. We are only looking at 2 T-1's, one for pstn and the other to a channel bank. Any advice? Bruce Reeves Nortex Networks -------------- next part -------------- An

In an effort to bring Asterisk Users from across the state of Texas together, the Texas Asterisk Users Group has been formed. The goal is to help Asterisk users meet other is their area and to help spread the word about the Asterisk community. I anticipate regional meetings of members and look forward to all of our members being able to attend the Astricon Event in Dallas in October. I invite