similar to: asterisk spandsp and txfax

Hi list, Just installed spandsp. In my limiting testing, I have an issue on a Philips fax machine (HFC21) directly connected to my * server through TDM400, reception with rxfax works fine, but txfax always fails. Below is a transcript of failed transmit. This is with asterisk-1.0.3 (with native moh patch but I don't think it is the source of the problem). I already tried libtiff 3.5.7,

I'm getting the following when sending to a specific fax machine. Any ideas? File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif' Changed from phase 0 to 2 Slow carrier up Slow carrier down Slow carrier up <<< NSF: 20 00 00 11 80 00 8a 49 10 53 54 49 52 4c 49 4e 47 20 43 4f 56 49 4e 47 54 00 67 00 80 80 80 0c 01 02 NSF without final frame tag The remote is made by

Hi Ppl. Once, couple weeks ago when I have updated * from CVS-HEAD something happen and I could not send a fax anymore. After that I have tried previous * CVS versions with different versions of spandsp (0.0.1, 0.0.2pre4, 0.0.2pre10) but without any changes. I have tried that on Fedora Core 2 with libtiff-3.5.7-16.1 and libtiff-devel-3.5.7-16.1. Everything compiles smoothly, but when I try to send

Hi all, I'm using txfax and rxfax to send and receive faxes. I find that txfax performs very well when sending to an old fax machine. However, when trying to send to a Mac (OS X) that accepts faxes, I get a "Trainability test failed" message on the * console (full console log below). I'm OK with being unable to fax to Mac, as I'm just using it to test. For future

Hello, I have installed SpanDSP and the apps txfax an rxfax. Unfortunately I am having problems sending faxes. I only get cancelled transfers. I am trying to send a fax to a ISDN card connected to a zap channel. I am using following call file: ------------------------------- Channel: ZAP/g1/25 MaxRetries: 0 WaitTime: 20 Application: txfax Data: /tmp/lVD3wy.tiff|caller Asterisk shows:

Can someone explain me what's going on and why the receiver of this fax guives up saying communication error? Slow carrier up Slow carrier down Slow carrier up <<< CSI: 40 20 20 20 20 20 20 20 34 39 34 35 36 34 39 35 30 20 39 33 2b CSI without final frame tag Remote fax gave CSI as: "+39 059465494 " <<< DIS: 80 00 ee f8 c4 00 DIS with final frame tag In

Hi, I am trying to recice a fax with * using SpanDSP - but it doesn't create the output file. (See the bottom of log file). * Loads both app_rxfax.so and app_txfax.so fine. Also I can't make * autodetect an incomming fax call (yes I have enabled faxdetect=both in zapata.conf - though it's not a Zap device) Any ideas are welcome :-) Best Regards Michael L?jtnant System Details:

Hi, We are trying to use astfax (from Inter7) to send faxes directly from email accounts through *. The problem is that the fax machine answer the call when we test astfax (with the line in the README) and then it retries three or four times to send it, and hangup the channel. The fax is connected to a zap channel, and it has an extension configured for itself. This is an excerpt of the

Hello list, We're currently facing some issues concerning T.38 gateway faxing. This is a device used almost exclusively for receiving faxes. Calls are incoming to asterisk on a SIP trunk (sangoma netborder) using G711A. Gateway mode is activated in the asterisk dialplan towards a Cisco SPA 112 running firmware 1.3.5. We are using asterisk 1.8.13.0 with the T.38 gateway patch applied (I know I

Thanks for the information Lee ! Still, something is still strange to me, since this two Panasonic Fax machines are receiving at least 20 multi-paged faxes a day (they are in same office as both Asterisk boxes, and me :) ). Beside that, POTS lines in those two faxes are from same PSTN switch as line in X100P in one of Asterisk boxes, and the ISDN PRI lines in other Asterisk box is from same PSTN

Hi everyone ! I have some aditional info on problem with TXFax and sending multi-page TIFFs. I have made 6 different multi-page TIFFs (Group3 1D with fillbits EOL aligned - 3 pages one TIFF in lowres and one in hires, Group3 2D -3 pages againg in both resolutions , and Group 4 - 3pages in both resolutions), and then tried to send them to Panasonic KX-F1100, Panasonic KX-F500 and SpanDSP

Guys, I have been a trying to send a fax using spandsp/app_rtxfax/asterisk. I'm trying to send a (3 page) fax, and all I'm receiving is a single blank page (and I've tried it with 2 fax machines). As some background, I'm using asterisk with an E1 connection through a Sangoma WAN card -- all of this has been working with voice for over 6 months. The software is all working too

Guys, [Forgive this repost -- my original posting doesn't seem to have shown up in the list (yet)] I have been trying to send a fax using spandsp/app_rtxfax/asterisk. I'm trying to send a (3 page) fax, and all I'm receiving is a single blank page (and I've tried it with 2 fax machines). As some background, I'm using asterisk with an E1 connection through a Sangoma WAN card

Hi Everyone, I'm new to asterisk and trying to get together the hardware to run a few POTS phone extentions and one or two POTS lines for starters. For these low port counts, I could just go with FXS and FXO cards, but... I can get a Cisco MC3810 with a mixture of FXO and FXS ports, the MC3810 comes with a built in ethernet port and I believe it does SIP too... Will this mean that I

Hi, We have no problems sending to HP and Panasonic fax machines in the office. We do have problems when we try to send faxes to services supporting fax, i.e. J2 or our UC platform. The receiving side doesn't recognize fax. To send a fax we drop into /var/spool/asterisk/outgoing: Channel: Zap/g1/<fax number> MaxRetries: 0 WaitTime: 20 Context: webley_txfax Extension: txfax_ext

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

I try to use hylafax to send fax, but i encounter with TRAINING failed error I try many times to send a fax to fax machine whose type is Canon Laser Class 9000 Series I always failed with the TRAINING failed error but succeed 2-3 times I also send fax to another machine whose type is Panasonic And I failed all the time with the same error without any success When using windows's fax modem to

Hello, For those customers with only analog lines, who ask for fax2email and email2fax, whats the most reliable solution available and tested with Asterisk? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120529/3e28b56e/attachment.htm>

Has anyone here successfully gotten a cisco MC3810 talking with asterisk? I am getting the dreaded - Got SIP response 400 "Bad Request - 'Malformed/Missing URL'" back from xxx.xxx.xxx.xxx If you've gotten it to work you can feel free to email me off list. If your willing to share config's that also is a definate plus. Thanks, --Tammy

HI, I have been pulling my hair out trying to get a Cisco MC3810 to interface my Asterisk box with a T1. I am able to make outgoing calls but incoing calls never reach my Asterisk box. The cisco give a fast busy when I try to call one of the DID's. When playing around with the dial-peers I can get the cisco to pick up the call, but then it forwards the call back to the ANI that is dialing.