similar to: CHANUNAVAIL, busy and congestion

I have a major problem with SIP redirects, or maybe just do not understand how they are supposed to work. We are using Cisco 7940s and 7960s with SIP version 6.3. Asterisk 1.2.5. A call come in to extension 944 over the IAX trunk. Extension 944 has forward all to extension 904 set on the phone. According to the dialplan. extension 904 should ring for 90 seconds, then ring another extension, and

We recently deployed 10 SNOMs as part of a PBX hosted solution. We have one phone setup as the receptionist phone, using hints to show busy office lines. This all works as expected. This is a new installation, and people are just starting to setup their phones. For those of you not familiar with SNOM phones, there is a row of keys on the right side of the phone which SNOM calls function keys. In

I've got a setup where we have 100 DID's. Our default dialplan has one line that calls a macro: exten => _22XX,1,Macro(STDEXT,${EXTEN}) The macro is pretty basic: [macro-STDEXT] exten => s,1,NoOp exten => s,2,Dial(SIP/${ARG1},15,Tt) exten => s,3,Goto(s-${DIALSTATUS},1) exten => s-NOANSWER,1,Voicemail(${ARG1}|u) exten => s-NOANSWER,n,Hangup exten =>

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

Hi: i have a problem. Mi extensions.conf: exten => _N.,1,Setvar(VOICEMAILREQ=${EXTEN}) exten => _N.,2,SetAccount(${customer}) exten => _N.,3,SetCDRUserField(${VOICEMAILREQ:1}) exten => _N.,4,ResponseTimeout(5) exten => _N.,5,Background(ifyou) exten => _N.,6,Background(silence/1) exten => _N.,7,Background(ifyou) exten => _N.,8,Background(silence/5) exten

Mar 15 12:54:01 NOTICE[24269] channel.c: Dropping incompatible voice frame on Local/[removed number]@context-5c3e,2 of format ulaw since our native format has changed to slin Can anyone provide an English translation of what this means? The extension is a Polycom IP 501 The only allowed formats are g.711u MOH is MP3 files (obvious) All prompts have been re-recorded in .ul uLaw

Several times a day I get this meesage scrolling on one of our asterisk boxes: Mar 13 14:43:47 NOTICE[11264]: channel.c:1911 ast_read: Dropping incompatible voice frame on Local/928@sanset-d88e,2 of format slin since our native format has changed to alaw Mar 13 14:43:47 NOTICE[11264]: channel.c:1911 ast_read: Dropping incompatible voice frame on Local/928@sanset-d88e,2 of format slin since our

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

I encountered this strange problem which is I can call into Asterisk box but I cannot call out. I was successful before using exactly the same euroISDN line but with TE110 and different versions of Asterisk. This time, I am using: . TE410 . Asterisk 1.4.13 . Zaptel 1.4.6 . Libpri 1.4.2 1) I put the following into extensions.conf to get to the outside line exten => 0,1,Dial(Zap/1) 2)

Dear all, i have a problem with a system running - Ubuntu 10.04 ( all updates done ) - ii asterisk 1:1.8.5.0-1digium1~lucid Open Source Private Branch Exchange (PBX) - ii asterisk-dahdi 1:1.8.5.0-1digium1~lucid DAHDI devices support for the Asterisk PBX I also use freepbx 2.9 for the configuration. Hardware is a Dell R410 and a Digium

Hello: I have this situation: I can make calls internally, I can make inbound calls but I can't make outbound calls. Thanks in advance. These are my devices: * asterisk 11.8.1 = 192.168.1.22 * sipphone grandstream gxp2160 = 192.168.1.5 * gateway audiocodes mp-114 2fxs-2fxo = 192.168.1.4 port 1 (FXS) connected to an analog phone port 3 (FXO) connected to the PSTN These are my

How do you enable call waiting on sip phones? Ive looked and googled and can only find call waiting pstn phones butnot for sip. Is their a way of setting this up within the dailplan?

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: --

Hi This is the output from show dialplan dial-sipmnf-sippt-pstn [ Context 'dial-sipmnf-sippt-pstn' created by 'pbx_config' ] 's' => 1. Verbose(1,Dialing ${ARG1} on mnf pt pstn) [pbx_config] 2. Dial(SIP/${ARG1}@${SIPMNF},${ARG2},${OUTBDIAL}) [pbx_config] 3. Set(GLOBAL(FOUNDME)=${DIALSTATUS}) [pbx_config]

What is involved in provisioning Asterisk to use a multiline analog service from our local telco? I will only have one twisted pair entering in on a OpenVox card but am not sure how Asterisk interprets and deals with two incoming calls and/or two outgoing calls? Thanks! jlc

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Hi, We have been migrating our PBX system from Asterisk 1.8 and chan_sip to Asterisk 13 and chan_pjsip. Things are mostly, ok, but now I have stumbled on a behaviour difference I don't like. With chan_pjsip when a phone went unexpectedly offline (Ethernet cable disconnected) Asterisk would detect this quickly (through the 'qualify' pings), mark the phone as 'Unavailable' and

Egads. Getting queues to work is like pulling teeth. extensions.conf: exten => q_main,1,Queue(oneeighty_main||||1) exten => 80014055,1,Dial(SIP/80014018,15,tr) exten => 80014057,1,Dial(SIP/80014018,15,tr) exten => 80014052,1,Dial(SIP/80014018,15,tr) queues.conf: [oneeighty_main] musiconhold = default joinempty = strict leavewhenempty = strict strategy = rrmemory retry = 0 member

I'm still trying to learn some parts of Asterisk, so sorry in advance for the dumb question! How do I set up an extension to dial out to the PSTN through my ZAP interfaces? I want the ability to have a ring group that will ring all of the phones in an office and then ring cell phones if nobody answers. I'm sure this is simple to do but I'm at a loss. I have tried the following