AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI
(single span). I'm sure I just have something goofed up in the
dialplans? I have a bunch of Polycom 331 IP phones connecting to the
server. I can dial the other extensions in the system fine and I can
dial long distance outgoing but cannot seem to get it to dial local (7
digit) calls.
I see this in the CLI:
-- Executing [s at macro-dialout-trunk:19] Dial("SIP/801-09b6e498",
"DAHDI/g1/5551212|300|") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/5551212
-- Channel 0/1, span 1 got hangup, cause 28
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s at macro-dialout-trunk:20] Goto("SIP/801-09b6e498",
"s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:1]
GotoIf("SIP/801-09b6e498", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:3]
NoOp("SIP/801-09b6e498", "TRUNK Dial failed due to CHANUNAVAIL
(hangupcause: 2 - failing through to other trunks") in new stack
Also when I check the PRI DEBUG I see an Error 28 which indicates an
invalid number format. But I'm just sending 5551212, which should be
o.k.
I'm a newbie at this...any suggestions welcomed.
-Ben-
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091007/6da64a72/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 172 bytes
Desc: image001.gif
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20091007/6da64a72/attachment.gif
Perhaps send it as 10 digits or 1+?
Cary Fitch
_____
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ben Schorr
Sent: Wednesday, October 07, 2009 3:58 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Can dial long distance but not local?
AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single
span). I'm sure I just have something goofed up in the dialplans? I have a
bunch of Polycom 331 IP phones connecting to the server. I can dial the
other extensions in the system fine and I can dial long distance outgoing
but cannot seem to get it to dial local (7 digit) calls.
I see this in the CLI:
-- Executing [s at macro-dialout-trunk:19] Dial("SIP/801-09b6e498",
"DAHDI/g1/5551212|300|") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/5551212
-- Channel 0/1, span 1 got hangup, cause 28
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s at macro-dialout-trunk:20] Goto("SIP/801-09b6e498",
"s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:1]
GotoIf("SIP/801-09b6e498", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:3]
NoOp("SIP/801-09b6e498",
"TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 2Cool - failing through
to other trunks") in new stack
Also when I check the PRI DEBUG I see an Error 28 which indicates an invalid
number format. But I'm just sending 5551212, which should be o.k.
I'm a newbie at this.any suggestions welcomed.
-Ben-
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091007/29d28475/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 172 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20091007/29d28475/attachment.gif
Ben Schorr wrote:> > AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI > (single span). I?m sure I just have something goofed up in the > dialplans? I have a bunch of Polycom 331 IP phones connecting to the > server. I can dial the other extensions in the system fine and I can > dial long distance outgoing but cannot seem to get it to dial local (7 > digit) calls. >My guess is that your provider requires the full 10 digits even for local calls. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."